GNU Classpath, Essential Libraries for Java, is a GNU project to create free
core class libraries for use with virtual machines and compilers for the Java
programming language.
WWW: http://www.classpath.org/
===> The following configuration options are available for classpath-0.99_9:
CAIRO=off: Use Gtk+ Cairo based Graphics2D
ECJ=off: Embed ECJ as com.sun.tools.javac
EXAMPLES=on: Build and/or install examples
GCONF=off: GConf configuration backend support
GJDOC=on: Build javadoc replacement
GMP=on: Enable native java.math.BigInteger
GTK2=on: Enable Gtk+ AWT peer
QT4=off: Enable Qt AWT peer
===> Use 'make config' to modify these settings
Remove expired ports:
2018-12-02 java/classpath: Staled since 2012, OpenJDK is live now
java/cacao: Depends on expired java/classpath
2018-12-04 java/jamvm: Abandonware, depends on expired java/classpath
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
Change x11/xorgproto to become a build dep
Change x11/xorgproto to become a build time dependency when added to
USE_XORG. Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.
PR: 230909
Reviewed by: eadler
Approved by: portmgr (antoine)
Obtained
from: https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run: antoine
Differential Revision: https://reviews.freebsd.org/D16906
Switch to xorgproto instead of individual packages
Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto. This update
tracks that change.
* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
instead depend on xorgproto. Bump portrevision.
* Delete the old *proto packages, update MOVED.
PR: 230023
Submitted by: zeising
Approved by: portmgr (antoine)
exp-run by: antoine
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
For ports that are marked BROKEN on armv6, and also fail to build on
armv7, mark them so.
This is part two of a multipart commit to bring armv7 ports to parity
with armv6.
Approved by: portmgr (tier-2 blanket)
Obtained from: lonesome.com -exp run
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Mark some ports failing on power64. In cases where the error message
was a stub, provide a real one.
While here, pet portlint.
Reported by: swills
Approved by: portmgr (tier-2 blanket)
Provide error messages for some ports failing on aarch64, and, in a
few cases, other tier-2 archs.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
Remove libiconv.so.3 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps. Bump dependent ports that have not
been bumped since.
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
Remove indefinite articles and trailing periods from COMMENT, plus minor
COMMENT typos and surrounding whitespace fixes. A few Makefiles where not
included as they contain Latin-1 characters that break the Phabricator
workflow. Categories J-L.
CR: D305
Approved by: portmgr (swills)
Update freetype to 2.5.2.
Remove patch to add -I/usr/local/include in freetype-config --cflags. If
ports need extra headers they should look for them, and not get them via
a side-effect.
Freetype had a header resuffle in 2.5.1, patch ports to use the new header
style.
Thanks go to bdrewery for the two exp-runs and rakuco for helping me with
some troublesome cmake ports.
PR: ports/184587
Replace USE_GCC=4.6+ and USE_GCC=4.4+ by USE_GCC=yes.
Right now this is a noop in the former case and a noop in the latter
case unless lang/gcc44 has been installed explicitly.
This puts a bit more emphasis on standardizing on a canonical version
"current" GCC and makes it easier to update that canonical version
by changing the default in Mk/bsd.gcc.mk and updating the lang/gcc port.
That is, USE_GCC=yes means "use a decent/modern version of GCC" without
having to worry about details.
Approved by: portmgr (bdrewery)
- Build with java/bootstrap-openjdk on X86 platforms by default.
- Attempt to build with gcc on non-X86 platforms. Note the gcc must be
built with Java support.
- Update ECJ to 3.8.1.
The following changes were made in the previous commit.
- Use ECJ 3.8 instead of 4.2. This simplifies and add more Eclipse mirrors.
They are actually the same compilers released with different Eclipse JDTs.
- Add an option to build gjdoc.
- Add an option to build with GMP, which enables java.math.BigInteger.
- Add an option to build with native JDK. When it is turned off, ECJ or GCJ
(when WITH_GCJ is defined) is used for glibj.zip. Note ECJ (with gij) and
GCJ can compile classpath perfectly fine on FreeBSD 9 and later but it seems
libgcj interacts badly with 7 and 8. Need more investigation.
- Reduce unnecessary dependencies. zip is not used when "--with-jar" is
specified. Use pre-built ANTLR jar file, which is only used for gjdoc.
Remove JDK run-time dependency because it is only necessary to execute tools
and these tools are actually wrappers. Now we just execute them with javavm
wrapper (or user-specified VM when JAVACMD environment variable is set).
Note you need a valid JVM to run these commands now.
- Add a patch to fix an ugly JAR updater bug. Without this, the file name
must include "/" in it, e.g., "gjar i ./glibj.zip".
- Reset maintainership. See ports/164941.
- Fix conflicts with java/classpath. Note security provider configuration
is moved to ${PREFIX}/lib/security/SableVM.security. This file is always
loaded first because the short vendor name is SableVM. If it does not
exist, then classpath.security is loaded (java/security/Security.java).
- Reduce Makefile headers, add licenses, and convert to optionsNG.
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.
PR: ports/159624
Submitted by: Ruslan Mahmatkhanov <cvs-src@yandex.ru>
- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
Revert last commit. It is not possible (yet) to have the dirrmtry usage
in the post-install target. Its usage must preceed generate-plist.
This problem needs to be revisited either in a rework of bsd.port.mk or
each of these Makefiles.
Hat: portmgr
Pointy hat: edwin`
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
