Remove per deprecation/expiration note.

Remove gcc-testsuite from DISTFILES, along with the post-build and
check targets.  This reduces disk and bandwidth consumptions for a
feature (apparently) never used.

Remove obsolete code to create (empty) man pages in case regular
man pages cannot be created.

Address build failure caused by Mk/bsd.port.mk changes mid 2008. [1]

(I will go ahead and remove this port per the DEPRECATION note, but
figured these backports from newer versions may be helpful in case
someone wants to play with it nevertheless.)

PR:             132379 [1]
Submitted by:   Rikiya YONEMOTO [1]

Deprecate after this has failed to build for nearly half a year and I
failed to get a single user complaint.

EXPIRATION_DATE=2009-03-03.

Set MAINTAINER and LATEST_LINK unconditionally as opposed to using ?=.

Add sparc64 to NOT_FOR_ARCHS.   (Nothing really should use this port at
this point anyway, and we're down to six abandoned other ports overall.)

Reported by:    pointyhat

IGNORE this on FreeBSD 8 and above.  On the way, clean up download settings
and set COMMENT unconditionally since we no longer serve as a master port.

Migration from bison 1.x to 2.x

PR:             117086
Tested by:      -exp runs

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Announce --mandir and --infodir in configure --help so it won't fail
  when we pass them for GNU_CONFIGURE

PR:             ports/111470
Approved by:    portmgr
Tested by:      pointyhat exp run

Account for the removal of /usr/bin/objformat on 7-CURRENT and default
to elf instead of aout in this case.  Bump PORTREVISION.

Mark as NOT_FOR_ARCHS=amd64 instead of BROKEN.  This version of GCC really
should not
be used for AMD64.

Make CONFIGURE_ARGS and MAKE_ARGS additive, for the sake of child
ports and to bring my lang/gcc* ports more in sync.

Employ the new USE_LDCONFIG feature, which allows us to get rid of the
various, much more manual and error-prone hacks we needed so far. [1]

Reviewed by:    flz (for lang/gcc40) [1]

Install the .info files in a port-specific subdirectory, which removes
hidden conflicts with some older lang/gcc ports.

Also, convert pkg-plist to use a new substitution (%%SUFFIX%%) instead
of hardcoding the version number 33.

Always build both shared and static libraries instead of having these as
two exclusive options defaulting to the former.  This requires a hack to
set LD_LIBRARY_PATH from MAKE_ENV which makes me think the WANT_SHAREDLIBS
case really failed to build previously.

Make MAKE_ARGS non-cumulative.

Fix handling of shared libraries via rc.d for non-default prefixes and
move the rc.d script from PLIST_FILES to pkg-plist.

Do not strip some of the the binaries any longer.

No longer hardcode the version number in LATEST_LINK.

Remove the cklatest target which we just do not need any longer.

Bump PORTREVISION.

- add RC_D_SH to keep shared libs working after reboot
Approved by:    gerald

Remove USE_REINPLACE= and adjust the quoting of BROKEN=, both as advised
by new portlint.

SHA256ify

Approved by: krion@

Update to the 20051223 snapshot of GCC 4.1.0.

Install the .info files of the lang/gcc41 port in a port-specific
subdirectory, and move include/mf-runtime.h into a version specific
directory.   This allows us to remove the conflict with lang/gcc33,
and reduce the clash with lang/gcc42.

Also improve packaging by using @dirrm include/ssp instead of speculative
removal.

Update to the 20051215 snapshot of GCC 4.0.3.

Install the .info files of the lang/gcc40 port in a port-specific
subdirectory, and move include/mf-runtime.h into a version specific
directory.   This allows us to remove the conflicts with lang/gcc33,
lang/gcc41 and lang/gcc42.

Also, convert pkg-plist to use a new substitution (%%SUFFIX%%) instead
of hardcoding the version number 40.

Install the .info files of the lang/gcc42 port in a port-specific
subdirectory, which allows us to remove the conflicts with lang/gcc33
and lang/gcc34.

Dedicated to:   obrien

Complete the repocopy of lang/gcc41 to lang/gcc42 and update to the 20051210
snapshot of GCC 4.2.0.

Change pkg-plist to avoid hardcoding any version number.

PR:             90253

Accept -march/-mcpu "k8", "opteron", and "athlon64".

Support FreeBSD 7.

We no longer install any libraries to $PREFIX/lib, so remove this from
LDCONFIG_DIRS.

IGNORE on 7.x and above.

Directly install libraries into a port-specific location instead of
moving them there after the original installation.  This is simpler
and also avoids the problem where the port would overwrite/remove an
existing copy of libiberty.a, which boils down to a true conflict.

No longer put target specific files and include files at the very
end of pkg-plist since that broke the /sbin/ldconfig invocations the
ports machinery added there (before we'd get a chance).[1]

Reported by:    dinoex [1]

Now that the GCC 3.3 branch has been closed, switch from tracking snapshots
to the final release, 3.3.6.  Unfortunately, this requires using PORTEPOCH.
Tweak a comment and remove a debug output on the way.

Fix the handling of man pages on systems with an old version of Perl, once
and for all and forever.

Fix (and simplify) the handling of man pages on old systems with Perl 5.0.

Point out by:   pointyhat

Update to the 20050511 snapshot of GCC 3.3.6.

Add conflicts with the gcc40 and gcc41 ports, due to the .info files.
Simplify the handling of libraries which are not installed in all
configurations.
No longer install fsf-funding.7 gfdl.7 gpl.7, remove some cruft from
the post-install target, and simplify generation of the dynamic parts
of the packaging list.

Silence two portlint warnings.

Update to the 20050427 snapshot of GCC 3.3.6.  On the way, remove all traces
of the Java frontend and libgcj which speeds up the build significantly and
reduces the number of file conflicts with lang/gcc34 to a minimum (which is,
in turn, needed for proper building and testing of the alpha port). Everyone
with interest in Java really should use lang/gcc34 or, better, lang/gcc40.

Update to the 20050330 pre-release of GCC 3.3.6.

Update to the 20050223 snapshot of GCC 3.3.6.

Update to the 20050202 snapshot of GCC 3.3.6.

Update to the 20050112 snapshot of GCC 3.3.6.  Among others, this includes a
fix by obrien to use the KSE pthread lib for -pthread.

Update to the 20041215 snapshot of GCC 3.3.6.

Update to the 20041103 snapshot of GCC 3.3.5.

Update to the 20041013 snapshot.

Update to the 20040901 snapshot of GCC 3.3.5.

Update to the 20040630 snapshot and change the version to 3.3.5.
Optimize the SNAPDATE variable away on the way and use ${ECHO_MSG}
instead of ${ECHO} [1].

Spotted by:     eik [1]

Mark BROKEN on amd64.  It looks like the system compiler miscompiles this,
and most people on this platform will use either the system compiler or
gcc34 anyways.
se ${ECHO} instead of echo.

Update to the 2004-06-16 snapshot of GCC 3.3.4.

Update to the 2004-05-05 snapshot of GCC 3.3.4.

Remove support for WITH_BOUNDSCHECKING which was broken most of the time
(due to the 3.3 branch moving quite a bit between releases).

PR:             64959

Update to the 2004-04-11 snapshot and a later version of the bounds checking
patch (which still has two mismatches, though).
Tweak the pre-everything message, plus display a note when libgcj is not built.

Add a WITHOUT_LIBJAVA knob, which disables building libgcj and thus saves
quite some build time and also disk.  Make this the default on sparc64 and
ia64 where libgcj has not been ported to and thus fix long-standing packaging
issues on these two platforms.
On the way, update to the 20040322 snapshot of GCC 3.3.3.

PR:             63427 (mostly)

Update to the 20040308 snapshot of GCC 3.3.4.
- Work around breakage due to the renaming of x86_64 to amd64 (which still
  has not been addressed upstream).
- USE_SIZE is now the default, no need to specify it explicitly.
- Remove WANT_THREADS_SUPPORT knob, which should be a no-op by now.

Mark broken on amd64 (which used to be called x86_64).

Update to the 2004-02-16 snapshot of GCC 3.3.4.

Fix build on systems without a decent version of Perl.

PR:             62397

Update to the 2004-02-02 snapshot of GCC 3.3.  (Add distinfo part.)

PR:             62409

Update to the 2004-02-02 snapshot of GCC 3.3.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Consider another instance of the man pages not being generated if Perl 5.6
is not installed and move/adjust the previous hack.

Reported by:    bento
                Lee Harr <missive@hotmail.com>
                AMAKAWA Shuhei <sa264@cam.ac.uk>

The Fortran frontend binary is called g77, not f77.

Update to the 2004-01-26 snapshot of GCC 3.3.  Introduce a new make variable
SUFFIX to avoid hardcoding the version number and reorder USE_ variables.

Use the SORT macro from bsd.port.mk.

Add missing part of yesterday's commit.
  Update to the 2004-01-19 snapshot of GCC 3.3.  Employ USE_SIZE.

Reported by:    Rolandas Naujikas <rolnas@takas.lt>

Update to the 2004-01-19 snapshot of GCC 3.3.  Employ USE_SIZE.

Configure with --program-suffix and make related and further simplifications.

Sync handling of man pages with the gcc34 port.  Merge in my 2004/01/09
change to the gcc34 port to adjust the renaming of gccbug to the scheme
used by the other programs installed by this port.  Remove hack to provide
stubs for binaries not built on some platforms.

Update to the 2004-01-12 snapshot of GCC 3.3.  Make the automatic generation
of the package list for libraries and include files more failure tolerant, so
that at least `make install` now works on sparc64.

libgcj still is not supported and packaging is broken on sparc64; mark BROKEN
on that platform.

Update to the 2004-01-05 snapshot.  On the way, combine and simplify the
post-install handling of target libraries and GCJ include files.

Update to the 2003-12-22 snapshot.

Update to the 2003-12-08 snapshot.  Simplify handling of .info files, and
merge in some of my recent changes to the gcc34 port.

Update to the 2003-12-01 snapshot (quite some fixes).
Further simplify handling of .info files.

Significantly simplify and shorten the post-install handling of GCJ include
files.

Restore support for gij.

Update to the 2003-11-03 snapshot of GCC 3.3.3.  Handle binaries that are
not provided on all platforms (notably SPARC at this time) by installing a
dummy instead.

Build GCC using `make bootstrap-lean` instead of `make bootstrap` to increase
the chance of success on disk starved hosts (e.g. on the FreeBSD cluster).

Use an updated version of the bounds checking patch which applies w/o
problems.

Adopt this port.

Agreed to by:   obrien

Update to a slightly newer version of the optional bounds checking patches,
but disable the note on WITH_BOUNDSCHECKING as even these have not been
updated for GCC 3.3.2 yet.

Noticed by:     trevor

Update to the GCC 3.3.2 release, fixing packaging problems caused by the
previous update on the way.
Generalize this port such that switching between GCC snapshots and releases
will be even simpler next time.  Remove code to use CVS to obtain sources as
I (wearing my GCC hat) can guarantee that we will provide snapshots as long
as needed in the future.

Update from the 2003-08-04 to the 2003-10-13 snapshot which essentially
will become GCC 3.3.2.  Fix the incorrect pkg-descr on binaries installed.

- ECHO -> ECHO_MSG

for some ports:
- ECHO -> ECHO_CMD
- pre-fetch -> pre-everything

PR:             ports/56800-56819
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update the optional GCC bounds checking patch to the latest version which
again works with current GCC 3.3 sources (modulo a minor tweak to avoid a
patch affecting a bison generated file).

PR:             54587

Upgrade to the 4-Aug-2003 GCC 3.3.1 in-development snapshot.

style nit.

Use the nice new infrastructure for handling .info files.  It's so much
simpler now.

Upgrade to the 28-July-2003 GCC 3.3.1 in-development snapshot.

Use ${STRIP_CMD} instead of strip. Strip some additional files and simplify
the machinery so that we do not need to maintain duplicate lists of binaries.
Rename loop variables from $file to $f to avoid warnings by future versions
of portlint.
Fix a post-build comment.

Reviewed by:    obrien

My manpage creation fake-out broke with 3.1.1.  Give up and add a build
dependency on perl 5.6.

Add checksum for bounds-checking-gcc-3.3-1.00.patch.bz2 lost by revision 1.69.

Upgrade to the 7-July-2003 GCC 3.3.1 in-development snapshot.

Add bounds-checking support using Herman ten Brugge's patches.

PR:             53395
Submitted by:   Dan Nelson <dnelson@allantgroup.com>

Don't remove the share/java and share/java/classes system directories.

Update to the official release of GCC 3.3.  On the way, somewhat restructure
the port so that switching between snapshots and releases will amount to fewer
changes in the future.
Clean up PLIST_SUB and pkg-plist and add two missing entries to MAN1.

Update to the second prerelease of GCC 3.3.  Add support for the core
languages testsuites (similar to the lang/gcc32 port).

I now made .bz2 sources available on gcc.gnu.org, so again use these instead
of .gz sources.  Remove a makeinfo related hack for CONFIGURE_ENV which is
not needed any longer.

Update to the first prerelease of GCC 3.3, which is only available as .tar.gz.
Adjust COMMENT and remove NO_CDROM. Reenable man pages.

Remove --with-gnu-as --with-gnu-ld, which are actually no-ops.

Properly add the "[FreeBSD]" marker to the GCC version string also for
prereleases and releases.

G++ headers are now installed in c++/<gcc_ver> rather than g++-v3.

Upgrade to the 28-April-2003 GCC 3.3 in-development snapshot.

Upgrade to the 21-April-2003 GCC 3.3 in-development snapshot.

Merge targets pre-configure and pre-build, simplify them, and remove
patch-va.  All of these dealt with us patching generated files (which
we don't do any longer).

Make MAINTAINER overrideable by slave ports.

Fifty-one months after ELF flag day, and after the system compiler became
ELF-only as well, remove support for aout from the next generation of GCC.

Suggested by:   Loren James Rittle <rittle@labs.mot.com>
Discussed with: obrien

Further fixes to pkg-plist.  (Tested according to Porter's Handbook 2.4 on
i386-unknown-freebsd4.8.)