After the release of GCC 7.5 the GCC 7 release branch has been closed
upstream; there won't be any further snapshots from this branch.

Hence remove the lang/gcc7-devel port which has been tracking such
snapshots.

lang/gcc7 is a direct replacement and will be around for a while still.

Update to the 20191107 snapshot of GCC 7.4.1.

More or less only changes for Darwin, and lots and lots thereof, so
in theory we should not be seeing changes, but...

Update to the 20191031 snapshot of GCC 7.4.1.

This brings a fix on the Fortran side and an optimization for some
Arm flavors, plus loads of Darwin changes (which should not affect
us).

Update to the 20191024 snapshot of GCC 7.4.1.

This fixes two tree optimization bugs, improves debug info generation, and
addresses one Fortran issue.

Update to the 20191017 snapshot of GCC 7.4.1.

This includes a fix for each of powerpc, arm, and register allocation.

Update to the 20191010 snapshot of GCC 7.4.1.

This fixes a powerpc* (aka rs6000) backend issue.

Update to the 20190303 snapshot of GCC 7.4.1.

This mostly brings Darwin and SH-specific changes, but some for i386
may affect FreeBSD as well.

Update to the 20190926 snapshot of GCC 7.4.1.

Update to the 20190919 snapshot of GCC 7.4.1.

This brings one Fortran-specific fix (apart from changes, mostly to the
testsuite, not relevant for us).

Update to the 20190912 snapshot of GCC 7.4.1.

Few backports of fixes from mainline, including x86-64, lower level
optimizer, and one, two others.

Update to the 20190905 snapshot of GCC 7.4.1.

Loads and loads of backports of testcases, Fortran, some LTO and tree
optimizer fixes, C++ and libstdc++, apparently prepared for a compiler
Red Hat uses somewhere.

Update to the 20190829 snapshot of GCC 7.4.1.

This only fixes a bug around abs() and MMX on x86-64.

Update to the 20190822 snapshot of GCC 7.4.1, skipping the 20190815
snapshot which did not bring actual changes.

This brings backports for two generic optimizer fixes.

Update to the 20190808 snapshot of GCC 7.4.1, skipping the 20190801
snapshot which did not bring actual changes.

This brings backports for two issues on the Fortran side.

Update to the 20190725 snapshot of GCC 7.4.1.

This addresses an issue around link-time optimizations (LTO) and identifies
incorrect input for -Werror.

lang/gcc*: Hide pkg-message during upgrades

PR:		239419
Approved by:	gerald (maintainer)

Update to the 20190718 snapshot of GCC 7.4.1.

The 20190711 snapshot did not bring any changes, so we skipped it.
This one brings a backport for Arm and one for dataflow analysis
(plus one for s390).

Update to the 20190704 snapshot of GCC 7.4.1.

Update to the 20190627 snapshot of GCC 7.4.1.

Update to the 20190620 snapshot of GCC 7.4.1.

Update to the 20190613 snapshot of GCC 7.4.1.

Update to the 20190606 snapshot of GCC 7.4.1.

Update to the 20190530 snapshot of GCC 7.4.1.

Update to the 20190523 snapshot of GCC 7.4.1.

Update to the 20190516 snapshot of GCC 7.4.1.

Update to the 20190509 snapshot of GCC 7.4.1.

Update to the 20190502 snapshot of GCC 7.4.1.

Update to the 20190425 snapshot of GCC 7.4.1.

Update to the 20190418 snapshot of GCC 7.4.1.

Update to the 20190411 snapshot of GCC 7.4.1.

Update to the 20190404 snapshot of GCC 7.4.1.

Update to the 20190328 snapshot of GCC 7.4.1.

Update to the 20190321 snapshot of GCC 7.4.1.

Update to the 20190314 snapshot of GCC 7.4.1.

Update to the 20190307 snapshot of GCC 7.4.1.

No longer require a not too old version of GCC to build on powerpc64, but
rely on the system compiler (even if that means we need to be explicitly
conservative when it comes to optimizations). [1]

PR:		235975 [1]
Submitted by:	Piotr Kubaj <pkubaj@anongoth.pl> [1]

Update to the 20190228 snapshot of GCC 7.4.1.

Simplify the creation of the multilib-related tree on powerpc64 and
avoid leaving an empty directory behind on the way. [1]

PR:		235964, 231804 [1]
Discussed with:	Piotr Kubaj <pkubaj@anongoth.pl> [1]

Update to the 20190221 snapshot of GCC 7.4.1.

Update to the 20190214 snapshot of GCC 7.4.1.

Update to the 20190207 snapshot of GCC 7.4.1.

On powerpcspe configure GCC --with-cpu=8548 instead of --with-cpu=8540,
which caused the build to fail after the update to binutils 2.31 and was
factually incorrect anyways (since the oldest we support is 8548).

PR:		235393
Reported by:	jhibbits

Update to the 20190131 snapshot of GCC 7.4.1.

Update to the 20190124 snapshot of GCC 7.4.1.

Update to the 20190117 snapshot of GCC 7.4.1.

Update to the 20190110 snapshot of GCC 7.4.1.

Update to the 20190103 snapshot of GCC 7.4.1.

Update to the 20181227 snapshot of GCC 7.4.1.

Install 32-bit libraries for powerpc64 if built.

Approved by: gerald@

Update to the 20181220 snapshot of GCC 7.4.1.

Update to the 20181213 snapshot of GCC 7.4.1.

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Update to the 20181206 snapshot of GCC 7.4.1, that is, this is the first
snapshot after the GCC 7.4 release.

Update to the 20181129 snapshot of GCC 7.3.1.

Create a separate USES block earlier in the Makefile and moving relevant
items there. [1]

Reported by:	portlint [1]

Update to the 20181122 snapshot of GCC 7.3.1.

Update to the 20181115 snapshot of GCC 7.3.1.

Update to the 20181108 snapshot of GCC 7.3.1.

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Update to the 20181101 snapshot of GCC 7.3.1.

Update to the 20181025 snapshot of GCC 7.3.1.

Update to the 20181011 snapshot of GCC 7.3.1.

This includes files/patch-libgfortran directly, so remove our local copy
on the way.

Update to the 20181011 snapshot of GCC 7.3.1.

Update to the 20181004 snapshot of GCC 7.3.1.

Add a partial fix for what was reported in PR 231804, the part that's
actually relevant upstream and that I made there, cf.
https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00076.html as a new
local patch files/patch-libgfortran until I have backported this to the
upstream release branch and hence we get it via the weekly snapshots.

PR:		231804

Update to the 20180927 snapshot of GCC 7.3.1.

Update to the 20180920 snapshot of GCC 7.3.1.

Update to the 20180913 snapshot of GCC 7.3.1.

After an include, PLIST_SUB must be appended to, not overwritten.

If it is overwritten, many values will be clobbered, and
pain will ensue.

PR:		230864
Submitted by:	mat
exp-runs by:	antoine

Update to the 20180906 snapshot of GCC 7.3.1.

lang/gcc7{,-devel}: Fix powerpc64 USE_GCC dependency loop

Approved by:	gerald (maintainer), timur (mentor)
Differential Revision:	https://reviews.freebsd.org/D16784

Update to the 20180830 snapshot of GCC 7.3.1.

Update to the 20180823 snapshot of GCC 7.3.1.

Update to the 20180816 snapshot of GCC 7.3.1.

Update to the 20180809 snapshot of GCC 7.3.1.

Update to the 20180802 snapshot of GCC 7.3.1.

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

Update to the 20180726 snapshot of GCC 7.3.1.

Update to the 20180719 snapshot of GCC 7.3.1.

Update to the 20180712 snapshot of GCC 7.3.1.

Update to the 2018070055 snapshot of GCC 7.3.1.

Update to the 20180628 snapshot of GCC 7.3.1.

Update to the 20180621 snapshot of GCC 7.3.1.

Update to the 20180607 snapshot of GCC 7.3.1.

Update to the 20180531 snapshot of GCC 7.3.1.

Update to the 20180524 snapshot of GCC 7.3.1.

Update to the 20180517 snapshot of GCC 7.3.1.

Run "/usr/sbin/service ldconfig restart" for USE_LDCONFIG instead of
"ldconfig -m <path>" so the order of ldconfig search directories after
package installation is the same as after a reboot.  The original command
simply appends the path to the list of directories while the ldconfig rc.d
script uses "sort -u".

Bump lang/gcc* which are known to install libraries with exactly the same
name so the library loaded at runtime depends on the order of the search
directories.

PR:		228046
Approved by:	portmgr (antoine)

Update to the 20180503 snapshot of GCC 7.3.1.

Update to the 20180426 snapshot of GCC 7.3.1.

Update to the 20180419 snapshot of GCC 7.3.1.

Update mpfr to 4.0.1 release and bump PORTVERSION of dependent ports.

Update to the 20180412 snapshot of GCC 7.3.1.

math/cloog
 - Update to 0.19.0
 - Use github
 - Add ac_cv_prog_TEXI2DVI to avoid building docs for now

devel/isl
 - Update to 0.19

- Bump PORTREVISION of all dependencies

Update to the 20180405 snapshot of GCC 7.3.1.

Update to the 20180329 snapshot of GCC 7.3.1.

Allow gcc compilers to be built on new arch 'powerpcspe'.

Tested for no-harm on amd64.

Submitted by:		jhibbits
Approved by:		portmgr (tier-2 blanket)
Differential Revision:	D13126

Update to the 20180322 snapshot of GCC 7.3.1.

Update to the 20180315 snapshot of GCC 7.3.1.

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

Update to the 20180308 snapshot of GCC 7.3.1.

Update to the 20180301 snapshot of GCC 7.3.1.

Update to the 20180222 snapshot of GCC 7.3.1.

Update to the 20180215 snapshot of GCC 7.3.1.