===> The following configuration options are available for go-devel-g20240208_2:
====> Options available for the single GOAMD64: you have to select exactly one of them
V1=on: Use baseline x86-64 instruction set
V2=off: V1 instructions plus CMPXCHG16B, LAHF, SAHF, POPCNT, SSE*
V3=off: V2 instructions plus AVX*, BMI*, F16C, FMA, LZCNT, MOVBE, OSXSAVE
V4=off: V3 instructions plus AVX512*
===> Use 'make config' to modify these settings
lang/go-devel: Recommend lang/go instead
This port is functionally closer to lang/go than lang/goXYZ in that it
installs unversioned binaries. A user who switches to a versioned Go
package may wind up wondering why `go` has disappeared.
lang/go-devel: Set an EXPIRATION DATE of 2026/03/01
This port has lived on only because it was the MASTERDIR for modern Go
ports. Now that they use lang/go/bsd.go.mk instead, this very old
version of Go (essentially go1.22) can go away.
To anyone who has been using it, please switch to lang/go instead.
lang/go-devel: Mark DEPRECATED
go-devel is a vestigial port that is used solely as a MASTERDIR. I'm
going to convert it to a bsd.go.mk, but in the meantime at least
discourage people from trying to use it as their go provider.
lang/go-devel: enhance portscout matching
Match 1.25.* instead of 1.25*, so it will not give 1.250 as an update
to 1.25 in about 50 years from now. :-)
PR: 290231
lang/go-devel: move portscout to master port
Implements PORTSCOUT for all lang/go1* ports.
PR: 290231
Fixes: c6297af4eff5e120d01d0c86c2d25d49418f389e "lang/go12[45]: silence
portscout"
lang/go-devel: fix a4327166148114c314ae5dd6f9c7e6776178e0ac
There was a typo in the initial commit
Also the glob is on the file name not on the path, to use the hammer
and a wild glob, anyway golang has no external dependencies anyway
lang/go{120,121,122,123,-devel}: Revert "Stop install Linux test binaries"
This reverts commit a9d50d18293658481ab9badf19ddc0dda84628b0.
A better solution was committed in a4327166148114c314ae5dd6f9c7e6776178e0ac
PR: 285151
Reported by: fuz
lang/go{120,121,122,123,-devel}: Stop install Linux test binaries
With pkg's improved shared library tracking these [useless anyways] files
started to confuse Poudriere.
Reported by: bdrewery
Approved by: adamw
PR: 285151
lang/go* ports: do not package back files
All the go ports installing *.bak files left after sed calls in
ports Makefile. Tweak sed calls to not create them in first place
and bump PORTREVISION to reflect package change.
PR: 280176
Approved by: go (maintainer timeout)
lang/go*: Update to Go 1.22 snapshot
- Add overridable BUILD_DEPENDS on shells/bash, but only for Go 1.22+
- Since lang/go121 also depends on it, allow SHEBANG_FILES to be
overridden
- Re-roll the patch
- Update lang/go120 to co-exist with lang/go-devel update
- Update lang/go121 to co-exist with lang/go-devel update
PR: 277091
*/*: Sunset 12.4-RELEASE/12-STABLE from ports tree
- Remove all references to defunct ARCH arm
- Remove all references to defunct ARCH sparc64
- Remove x11-drivers/xf86-video-sunffb which requires defunct sparc64
ARCH
- Remove sysutils/afbinit requires defunct sparc64 ARCH
- Remove all references to bktr driver
- Remove all references to defunct FreeBSD_12
- Remove all references to OSVERSION/OSREL corresponding to 12
- Remove conditionals in Mk/Uses/cabal.mk
- Remove sparc reference from Mk/Uses/qt-dist.mk
- Remove BROKEN_sparc64/NOT_FOR_ARCH=sparc64
- Remove BROKEN_FreeBSD_12* from:
- Remove OpenSSL patches from:
- Remove conditional flags for OSVERSION >= 1300000 to fixed flags.
Also move conditional flags for non sparc64/arm ARCH to fixed flags.
Reviewed by: brooks, jbeich, rene, salvadore
Differential Revision: https://reviews.freebsd.org/D42068
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
lang: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Dupre <ale@FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alonso Cardenas Marquez <acm@FreeBSD.org>
* Andreas Klemm <andreas@klemm.gtn.com>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Andrey Zakhvatov
* Anton Berezin <tobez@FreeBSD.org>
* Anton Berezin <tobez@tobez.org>
(Only the first 15 lines of the commit message are shown above )
lang/go{-devel,118}: Add GOAMD64 knobs
Add amd64 microarchitecture level knobs for the Go compiler. Note that
this will affect only the compiler itself, port users will still need to
set GOAMD64 in the environment to adjust the microarchitecture of the
compiled code [1, 2].
Set default to the baseline level for the maximum backward
compatibility.
GOAMD64=v1 (default): The baseline. Exclusively generates instructions
that all 64-bit x86 processors can execute.
GOAMD64=v2: all v1 instructions, plus CMPXCHG16B, LAHF, SAHF, POPCNT,
SSE3, SSE4.1, SSE4.2, SSSE3.
GOAMD64=v3: all v2 instructions, plus AVX, AVX2, BMI1, BMI2, F16C, FMA,
LZCNT, MOVBE, OSXSAVE.
GOAMD64=v4: all v3 instructions, plus AVX512F, AVX512BW, AVX512CD,
AVX512DQ, AVX512VL.
[1]
https://github.com/golang/go/wiki/MinimumRequirements#microarchitecture-support
[2] https://tip.golang.org/doc/go1.18#amd64
*/*: Introduce versioned Go ports
- Mk/Uses/go.mk: add support for selecting Go port version in USES=go;
- Mk/bsd.default-versions.mk: add GO_DEFAULT;
- convert lang/go-devel to the master and lang/go{117,118} to slave
ports;
- add lang/go meta-port that provides go and gofmt symlinks to the
current default version.
PR: 264336
Reviewed by: ygy jwb yuri mikael drtr0jan@yandex.ru decke mat
Differential Revision: https://reviews.freebsd.org/D35346
lang/go-devel: Convert to a slave of lang/go, apply D24122
- Convert lang/go-devel to a slave port of lang/go
- Apply D24122 (similar to r530387 for lang/go) to relax module consistency
checks in go1.14 mode
Reviewed by: mikael tobik
Differential Revision: https://reviews.freebsd.org/D24397
lang/go-devel: Address D23151 feedback, add COMPAT_FREEBSD11 canary
- Merge do-install and post-install targets
- Simplify makesum target
- Add COMPAT_FREEBSD11 canary introduced by lang/rust in r522968 (the rationale
described in the r522968 commit message also applies to lang/go{,-devel})
lang/go-devel: Add support for aarch64
AArch64 support was recently merged by the Go project and is slated to be in
go1.14. This patch adds freebsd/arm64 support to lang/go-devel first, the
intention is to similarly update lang/go when go1.14 is officially released.
The most notable change is migration to the new bootstrap [1] because aarch64
is not supported by go1.4.
[1] https://github.com/dmgk/go-bootstrap
Reviewed by: tobik, Mikael Urankar <mikael.urankar@gmail.com>
Approved by: tz (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D22316
New port: lang/go-devel
A development snapshot of lang/go. This port is intended to be
used by port maintainers for testing with future Go versions.
PR: 238374
Submitted by: dg@syrec.org
