2017-04-30 devel/stormlib-ghost++: Unfetchable for more than six months (google
code has gone away)
2017-04-30 devel/py-coil: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/py-cmdln: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/privman: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/c-unit: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/py-px: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/nglogc: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/bncsutil-ghost++: Unfetchable for more than six months (google
code has gone away)
2017-04-30 devel/liblouisxml: Unfetchable for more than six months (google code
has gone away)
2017-04-30 devel/nxt-python: Unfetchable for more than six months (google code
has gone away)
2017-04-30 devel/spdict: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/guiloader-c++: Unfetchable for more than six months (google
code has gone away)
2017-04-30 devel/streamhtmlparser: Unfetchable for more than six months (google
code has gone away)
2017-04-30 devel/winpdb: Unfetchable for more than six months (google code has
gone away)
2017-04-30 net/opendpi: Unfetchable for more than six months (google code has
gone away)

Mark the remaining ports depending on Google Code as DEPRECATED, with an
EXPIRATION_DATE at the end of April 2017.

In the past six months, about a third of the ports marked BROKEN because
they were hosted on Google Code have been fixed.  The remaining must not
be of use to anyone.

With hat:	portmgr
Sponsored by:	Absolight

GOOGLE_CODE has gone away.

- If a port has another upstream, remove GOOGLE_CODE
- If a port only has GOOGLE_CODE mark it BROKEN

Some ports have a local mirror configured but for security reasons, it
is not considered upstream.

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories h, i, j, k, and l.

With hat:	portmgr
Sponsored by:	Absolight

Convert to USES=jpeg

lang category: Remove $PTHREAD_LIBS

Note: ecl did not pass check-plist (pre-existing), PR 198897 submitted.

approved by:	PTHREAD blanket

Bump portrevision after png update

Finish properly support png 1.5

Properly support png 1.5

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

Cleanup plist

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Convert to use USES=objc which makes the port use clang to build
Add patches for libofc to properly build with libobjc2
Use options helpers to simplify a bit the makefile

Approved by:	vanilla

- Switch to USES=libtool, drop .la files

Approved by:	portmgr blanket

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

Add comment why ofc required gcc4.6.

Submitted by:	gerald@

1: convert LIB_DEPENDS to new format.
2: remove NO_STAGE.
3: use USE_GCC=4.6 instead.

PR:		ports/185306
Submitted by:	tijl@

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui

Add NO_STAGE all over the place in preparation for the staging support (cat:
lang)

1: Fix build with newer zlib [1]
2: switch to gcc46.

PR:		ports/180748
Submitted by:	John Marino <freebsd at marino.st> [1]

1: change master_site to code.google.com.
2: don't specify the shlib version number.

Please bmake(1)
Do not hardcode make(1)
Trim headers
Convert to new options framework

This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Track dependencies after databases/gdbm update

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

- remove MD5

- Mark BROKEN on 9.X:
  cc: DText.m: Objective-C compiler not installed on this system

Reported by:    pointyhat

Sync to new bsd.autotools.mk

Switch to use newer GMP version.

PR:             ports/144487
Submitted by:   ale
Approved by:    portmgr (-exp run by erwin)

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- update to jpeg7
Tested by:      pav on pointyhat

Chase libgmp and bump PORTREVISION.

Upgrade to 0.8.1.

- Chase devel/sdl12 shlib version bump

Upgrade to 0.8.0.

Remove BROKEN with gcc 4.2,
it's compileable after rafan's objc fix.

Mark as broken on gcc4.2.  While here, pet portlint.

Use libtool port instead of included version to avoid objformat a.out botch

Upgrade to 0.7.1.

Add ofc, it's The Objective-C Foundation Classes library.