Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

lang: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@tobez.org>

Remove # $FreeBSD$ from Makefiles.

Garbage collecte unusable things from lang/python{,2,3} metaports.

Drop the ipv6 virtual category for l* category as it is not relevant anymore

Add a not to a few meta ports: do not depend on these ports

Update WWW

Simplify Makefile

- Simplify RUN_DEPENDS
- Use bsd.port.mk instead of bsd.port.pre.mk + bsd.port.post.mk

Fix symbolic links of idle and pydoc

- Bump PORTREVISION for package change
- While I'm here:
  - Remove leading definite article from COMMENT
  - Fix indent
  - Add NO_ARCH

PR:		216310
Submitted by:	Jose M. Alcaide <josemaria.alcaide@ehu.eus>
MFH:		2017Q1

Remove ${PORTSDIR}/ from dependencies, categories h, i, j, k, and l.

With hat:	portmgr
Sponsored by:	Absolight

Remove dead PYTHON_NO_DEPENDS. It has not been needed or supported since
USES=python was added in r364450.

- Convert ports of irc/ and lang/ to new USES=python

Approved by:	portmgr (implicit)

Remove support for pkg_install
Merge back bsd.pkgng.mk into bsd.port.mk
Add a note about @stopdaemon not being supported anymore

With hat:	portmgr
Differential Revision:	https://reviews.freebsd.org/D693

- Fix and remove stale symlinks after the lang/python* cleanup

Reported by:	Scott Allendorf <scott-allendorf@uiowa.edu>

- Do not use absolute source paths for the symlinks to the stagedir

Noticed by:	danfe

- Enable stagedir support

lang/python: use python default version

- This package should track python default version and not be based on the port

With hat on:	python

Add NO_STAGE all over the place in preparation for the staging support (cat:
lang)

- improve the python meta port descriptions

Requested by:	demon@
Reviewed by:	demon@

- Bump PORTREVISION of lang/python since the package changed
- Refine UPDATING instruction

Approved by:	mva

- Avoid circular dependencies due to the previous bsd.python.mk change

- Move the symlink magic for the default python version into lang/python
  and lang/python2 and lang/python3. This change brings us closer to the goal
  of making Python ports usable with different Python versions at the same
  time.
- Add a new lang/python2 port to handle the symlinks for bin/python2,
  bin/idle2, bin/pydoc2 and so on.
- Add a new lang/python3 port to handle the symlinks for bin/python3,
  bin/idle3, bin/pydoc3 and so on.
- Bump the PORTREVISION on all lang/python* ports.

- Add pkgng support

- Speed up upgrade-site-packages [1]
- Use make modifiers [2]

PR:		ports/155970
Submitted by:	Julien Laffaye <kimelto at gmail.com> [1], sbz (myself) [2]
Exp-run by:	beat

- Remove distinfo, same informaion can (and should) be retrieved from
  ${PORTSDIR}/lang/python${PYTHON_SUFFIX}/distinfo
- Use ${SYSCTL}

- Add support for portmaster to upgrade-site-packages.

Approved by:    miwi

- Update lang/python26 and make Python 2.6.2 to the default Python version

Tested by:      3 pointyhat runs
Thanks to:      pav, gahr, lwhsu, mva, amdmi3

- Update python30 to 3.0.1

Release Changelog:
http://python.org/download/releases/3.0.1/NEWS.txt

- Fix sha256 checksum for python 2.6.1.

Reported by:    kib@
Approved by:    python (miwi)

- Add missing distinfo for python 2.5.4 and python 2.6.1

Welcome to the new era of Python 3, with antigravity support!

Update to Python 3.0.

Introduce two new versions of Python: 2.6 and 3.0rc1 (finally!)
Python 2.6 will be the next default python version when enough
testings of consumer ports are done.  The new "2to3" program is
renamed to 2to3-2.6 and 2to3-3.0 for each version, respectively.

Repo-copied by: marcus

Update python23 to 2.3.7.

Update python23 to Python 2.3.6 and python24 to Python 2.4.5.

Update to Python 2.5.2.

 - use PORTUPGRADE_CMD instead of PORTUPGRADE so as not to confict with the
   portupgrade env variable

Pointed out by: Miroslav Lachman <000.fbsd@quip.cz>

 - Make Python 2.5.1 the default Python version
 - Add significantly better support in bsd.python.mk for working with
   Python Eggs and the easy_install system

Tested by:      pointyhat runs
Approved by:    pav (portmgr)
Most work by:   perky
Thanks to:      pav

Update to Python 2.4.4.

Approved by:    maintainer timeout, alexbl (python@)
Tested by:      pointyhat
PR:             ports/105901

Populate a new ports-mgmt category. List of moved ports:

  devel/portcheckout -> ports-mgmt/portcheckout
  devel/portlint -> ports-mgmt/portlint
  devel/portmk -> ports-mgmt/portmk
  devel/porttools -> ports-mgmt/porttools
  misc/instant-tinderbox -> ports-mgmt/instant-tinderbox
  misc/porteasy -> ports-mgmt/porteasy
  misc/portell -> ports-mgmt/portell
  misc/portless -> ports-mgmt/portless
  misc/tinderbox -> ports-mgmt/tinderbox
  security/jailaudit -> ports-mgmt/jailaudit
  security/portaudit -> ports-mgmt/portaudit
  security/portaudit-db -> ports-mgmt/portaudit-db
  security/vulnerability-test-port -> ports-mgmt/vulnerability-test-port

Revert the default version of Python to 2.4 for the ports freeze
period.  Python 2.5 brought a vast range of incompatibility to a
large number of ports, so the python@ team will do more basic
compatibility work in a private repository and merge it later.
Sorry for the inconvenience.

Approved by:    portmgr (kris)

- Restrict a dependency to the real interpreter to _RUN only.  This
  allows portupgrade to upgrade lang/python from 2.4 flawlessly.
- So remove obsolete instruction.

Fix version number to 2.5 even if 2.4 is in the system.

- Update the main python version to 2.5.
  - Now, lang/python is just a meta-port which depends on lang/python25.
  - And all versions of Python ports have short version identifier in its
    package name; python25-2.5, python24-2.4.3 and etc.
  - Also you must upgrade all python modules after lang/python updated,
     cd /usr/ports/lang/python && make upgrade-site-packages

- Give maintainership of Python ports to the new python@ group which
  includes me, alexbl@ and others.

Fix buffer overrun when performing repr() on a unicode string in a build
with wide unicode (UCS-4) support.

Obtained from:  Python SVN (#51466)
Security:       CVE-2006-4980
With hat:       secteam

Add a checksum for 2.5c2 and remove checksums for old beta releases.

Avoid to use "ncursesw" which causes segfault when the system has
devel/ncurses installed due to a shared library collision between
a base ncurses from libreadline dependency and a local ncurses from
libncursesw dependency.

PR:             99496
Submitted by:   rachid achellal <rachid@in.nl>,
                Xiao-Yong Jin <xj2106@columbia.edu>

Add checksums for Python 2.5b3 and remove old checksums for pre-alpha
versions.

Add a checksum for Python 2.5b1

[PATCH] lang/python: Some portlint fixes

        - Fix tab/space issues

PR:             ports/95779
Submitted by:   Alexander Botero-Lowry <alex@foxybanana.com>
Approved by:    maintainer timeout

Remove USE_REINPLACE from the categories starting with L

Update to Python 2.4.3.

Add a checksum for Python 2.5.a0.20060326

SHA256ify (approved by krion@)

Add a CONFLICT to lang/python-mode.el.

Bring a bugfix enabling WITHOUT_THREADS build again.

Requested by:   Mike Harding <mvh@ix.netcom.com>
Obtained from:  Python CVS

- Update to Python 2.4.2. [1]
- Allow to override a command passing to distutils using
  PYDISTUTILS_{CONFIGURE,BUILD,INSTALL}_TARGET [2]
- Allow to specify BUILD/RUN dependency separatedly. [3]
- Replace shell executions with regex replacement on bsd.python.mk. [3]
- Remove thread serialization from socket.getaddrinfo() on FreeBSD 5.3
  and later versions because we've got thread-safe implementation. [4]
- Add a workaround to avoid curses.h problem of FreeBSD base.

PR:             86685 [1]
Submitted by:   Soeren Straarup <xride@x12.dk> [1],
                lioux [2], vsevolod [3], sobomax [4]
Obtained from:  Python CVS [4]

Add checksum for 2.5.a0.20050728 snapshot.

Fix fcntl.ioctl argument parsing to accept termios.TIOCGWINSZ.

Submitted by:   jkim
Obtained from:  Python CVS

Backport support for FreeBSD 7 and drop support for FreeBSD 3.
Fixes for other versions of python will be followed tomorrow.

Submitted by:   nork
Obtained from:  Python CVS

- Disable "fpectl" base module on non-i386 platforms to fix build
  on the recent -CURRENT i386 base. [1]
- Fix package build on NO_NIS base. [2]

PR:             81806 [1]
Submitted by:   Li-Lun Wang (Leland Wang) <llwang@infor.org> [1],
                ache [2]

- Make FPECTL support optional and turn it off by default because
  the feature brings huge overheads for floating point arithmetics
  and integer divisions. [1]
- Fix plist
- Bump PORTREVISION

Requested by:   Ewan Todd <ewan@mathcode.net> [1]

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Update to Python 2.4.1

Fix package building on non-i386 platforms by unrestrict `audioop`
module for them in plist.

Approved by:    portmgr (kris)

Unbreak package building on ia64, alpha, amd64 and sparc64 by
adding ossaudiodev module to their plists, either.

Approved by: portmgr (kris)

Add checksum info for Python 2.3.5.

Add a patch from PSF-2005-001 which fixes SimpleXMLRPCServer
vulnerability.

PR:             77078
Submitted by:   Marcus Grando <marcus@corp.grupos.com.br>
Security:       CAN-2005-0089
Security:      
http://www.vuxml.org/freebsd/6afa87d3-764b-11d9-b0e7-0000e249a0a2.html
Security:       SimpleXMLRPCServer.py allows unrestricted traversal

Resurrect lang/python-devel port with Python 2.5 development snapshot
as of today.

Add new utility target named 'upgrade-site-packages' to upgrade
site-packages which was built on previous version of python.

mpz module is deprecated since Python 2.2 and removed in Python 2.4.

- Update lang/python to 2.4 final release.
- Finish repocopy lang/python -> lang/python23 for Python 2.3.4

- Update python-devel to 2.4c1

farewell to libxpg4.

Add checksum for Python-2.4b2.

Add distinfo for Python-2.4a3

Fix package build on 4-STABLE.

Submitted by:   kstewart <kstewart@owt.com>

- Add support for FreeBSD 6.
- Remove support for FreeBSD 2.

Spotted by:     marcus, kris
Obtained from:  Python CVS

- Allow to disable IPv6 support [1]
- Add checksum for 2.4a2

PR:             69950 [1]
Submitted by:   Marcus Grando <marcus@corp.grupos.com.br>

Make PORTREVISION overridable by slave ports.

Found by:       eik's chkversion

Allow to install and use 3rd party packages in X11BASE.
${X11BASE}/lib/{python2.3{,/site-packages},site-python} will be
added to your python's sys.path if each directory exists.

Suggested by:   marcus

The tarball for Python 2.4a1 is renamed in the site.

Add checksum info for 2.4a1.

Fix comment.

Submitted by:   fjoe

Use ${CC} instead of cc on dynamic linkings.

PR:             67515
Submitted by:   michael johnson <ahze@ahze.net>

- Update to Python 2.3.4.
- Test WITHOUT_* instead of WITH_* for values which are on by default
  so that package build clusters detect correctly.

Use OPTIONS.

Submitted by:   Stephane E. Potvin <sepotvin@videotron.ca>

Reduce configure warning.

PR:             55180 [1], 65680 [2]
Submitted by:   Rui Lopes <rui@ruilopes.com> [1],
                Roman Neuhauser <neuhauser@chello.cz> [2]

Fixed a bug where the configure script couldn't detect getaddrinfo()
properly if the KAME stack had SCTP support.

Submitted by:   suz

Fix stackless build broken by the recent shared-build commit.

Submitted by:   Sven Petai <hadara@bsd.ee>

Correct pre-install target to pre-su-install so that the credential
switch happens before directories are created under PREFIX.

Submitted by:   marcel

- Fix installation problem where PREFIX != LOCALBASE.
- Add checksum for Python-2.4.a0.20040311

Create a symbolic link to lib/python2.3.so on lib/python2.3/config/
for seamless upgrade from a static library.

Suggested by:   dd

Build and install a shared library and its frontend besides static one
by default.

[HEADS UP] The python executable and static library isn't built PIC
anymore even on amd64 and ia64. Please use a shared library instead.

Requested by:   jhay, dd
Tested by:      Charles Swiger <cswiger@mac.com>,
                Tim Middleton <x@Vex.Net>

- Update stackless_python to 2.3.3 as of 040225 and unmark BROKEN.
- Set mutually exclusive confliction for {,stackless_}python.

- Add a workaround for the net/straw port installation problem
recently introduced by libpthread. The problem was that waitpid(2)
raised EINTR but python's distutils didn't catch it correctly.
- PORTREVISION is bumped to 2, subsequently.

On ia64, libpython2.3 must be built with -fPIC as well. This unbreaks
KDE (for example).

- Use process scope threads instead of system scope to enable large
  amount of threads on -CURRENT libpthread by default. [1]
- Merge bugfixes from python 2.3 maintenance branch: [2]
  o weakref object's garbage collection problem.
  o save unnecessary startup-time memory allocation of 100KB+ from
    intobject.
- SIZEify.
- Bump PORTREVISION subsequently.

Advised by:     eischen, julian [1]
Obtained from:  Python CVS [2]

Add checksum entry for Python 2.4 040106.