Remove expired ports:
2014-06-30 mail/cyrus-imapd2: Cyrus IMAPd 2.1.X have been deprecated, consider
using 2.4.X.
2014-06-30 mail/cyrus-imapd22: No further releases of 2.2.X are planned,
consider using 2.4.X.

Remove all the bootstrap files (.bs) from the plists.

Starting with perl 5.20, they're not installed any more if empty,
and on FreeBSD, they're (always ?) empty.

PR:		190681
Submitted by:	mat
Exp-Run by:	antoine
Sponsored by:	Absolight

Mark Cyrus IMAPd 2.1.X and 2.2.X as DEPRECATED.

Approved by:	portmgr (implicit)

avoid package name collisions.

Spotted by:	bapt

Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

- lang/perl5.12 upgrade to 5.12.5
- lang/perl5.14 upgrade to 5.14.4
- lang/perl5.16 upgrade to 5.16.3
- Global modify SITE_PERL[1][2]

[1] - See more info:
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=26605+0+archive/2013/freebsd-perl/20130609.freebsd-perl
[2] - Fix for mail/cyrus-imapd* - Approved by portmrg(bapt@)

Please, see ports/UPDATING for upgrade procedure.

Reviewed by:	bapt@ (exp-run), culot@

Update cyrus-sasl2 to 2.1.26.
This bumps shlib version of libsasl2.

Move the rc.d scripts of the form *.sh.in to *.in

Where necessary add $FreeBSD$ to the file

No PORTREVISION bump necessary because this is a no-op

Update master site.

Mark as ignored when build with Perl 5.14+

Remove quotes from BROKEN and IGNORE as they are not required

Approved by:    maintainer timeout

In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

- remove MD5

Remove databases/db3. All users were using db3+
and have in fact been using 4.0+ since 2011-04-12 (Mk/bsd.database.mk r1.57).

Chase upgrade in dependent ports and change USE_BDB to 40+.

Remove dependency to net-snmp4.  Because, it's marked as DEPRECATED
and will be removed soon.

PR:             ports/150558
Submitted by:   garga

Begin the process of deprecating sysutils/rc_subr by
s#. %%RC_SUBR%%#. /etc/rc.subr#

- Revert post-build: target because there are patch-*::Makefile.PL
  files for same purpose (but supported only old ExtUtils::MakaMaker,
  I updated them to work with 5.10.1 in previous commit).

Discussed with: skv

- Unbreak with perl5.10.

Approved by:    ume

Do not update "perllocal.pod" (to make Tinderbox happy).

Approved by:    pav (implicit)

Fix a few "bad example" problems in the rc.d scripts that have been
propogated by copy and paste.

1. Primarily the "empty variable" default assignment, which is mostly
${name}_flags="", but fix a few others as well.
2. Where they are not already documented, add the existence of the _flags
(or other deleted empties) option to the comments, and in some cases add
comments from scratch.
3. Replace things that look like:
prefix=%%PREFIX%%
command=${prefix}/sbin/foo
to just use %%PREFIX%%. In many cases the $prefix variable is only used
once, and in some cases it is not used at all.
4. In a few cases remove ${name}_flags from command_args
5. Remove a long-stale comment about putting the port's rc.d script in
/etc/rc.d (which is no longer necessary).

No PORTREVISION bumps because all of these changes are noops.

Remove dependency to p5-Pod-Parser and p5-File-Temp.

Welcome bsd.perl.mk.  Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.

Work done by:   gabor
Sponsored by:   Google Summer of Code 2007
Hat:            portmgr

make it compilable with gcc 4.1.

Reported by:    pointyhat via kris

Change the MASTER_SITES entries from
        ftp://ftp.hanse.de/sites/transit/mirror/
to
        http://www.transit.hanse.de/mirror/

Requested by:   Stefan Bethke <stb__at__lassitu.de>

Remove USE_REINPLACE from ports starting with M

Give sensible sentences for IGNORE.

Requested by:   kris

Replace BROKEN with IGNORE.

The Project Cyrus web site is migrated to a new server.

Remove the FreeBSD KEYWORD from all rc.d scripts where it appears.
We have not checked for this KEYWORD for a long time now, so this
is a complete noop, and thus no PORTREVISION bump. Removing it at
this point is mostly for pedantic reasons, and partly to avoid
perpetuating this anachronism by copy and paste to future scripts.

- use USE_BDB.
- add SHA256.

* reflect renaming on CPAN File-Spec to PathTools
   + add devel/p5-PathTools, remove devel/p5-File-Spec
   + update dependencies for all affected ports (make them unconditional),
     bump PORTREVISION for these ports
module was renamed
* reflect renaming on CPAN PodParser to Pod-Parser
   + add textproc/p5-Pod-Parser, remove textproc/p5-PodParser
   + update dependencies for all affected ports (make them unconditional),
     bump PORTREVISION for these ports

* for all changed ports make dependencies on File::Temp, Digest::MD5,
  Storable unconditional

* remove 'CONFIGURE_ARGS= INSTALLDIRS=site' from Makefile's
  (this variable is forced by bsd.port.mk now)

* update Class-Autouse to 1.17

* update POE-API-Hooks to 1.05

* make portlint happy (clean IGNORE, convert spaces to tabs and so on)

Update to 2.1.18.

Security::      Fix single byte overflow in imapd annotate extension.

use new scheme of USE_RC_SUBR.

Don't install/append to perllocal.pod.

Reported by:    pointyhat via kris

Update to 2.1.17.

  * Fix several security issues in imapd and in mysasl_canon_user.

don't exit at failure of `pw'.  some users prefer having user
`cyrus' in NIS.

Reported by:    nork

install manpages for ${PREFIX}/cyrus/bin into ${PREFIX}/cyrus/man
to avoid conflict with other ports.

PR:             ports/60949, ports/29223, ports/47913

prefer /usr/sbin/nologin than /sbin/nologin when creating user cyrus.

Requested by:   nork

cosmetic changes.

make it buildable on ia64 and amd64.
(since I don't have ia64 nor amd64, I tested at least it doesn't
break on i386.)

Obtained from:  NetBSD

BROKEN on amd64 and ia64: Does not compile (missing -fPIC)

Say hello to the new "net-mgmt" category.  There are probably more
ports that belong here than the ones I have identified and moved in
this, first, pass.

Approved in principle by: marcus

add http://home.jp.FreeBSD.org/~ume/ipv6/ for MASTER_SITES.

Set an appropriate LATEST_LINK to avoid conflicts with other ports.

Reported by:    kris

SIZEfy

make it buildable with net/net-snmp4.

remove pidfile at stop.

Update to 2.1.16.

utilize SITE_PERL

PR:             58166
Submitted by:   Cheng-Lung Sung <clsung@dragon2.net>

the start/stop scripts failed when booting on 5.x machines

ECHO -> ECHO_MSG, ECHO_CMD

fix comment

Reported by:    nork

USE_OPENSSL must be set before including bsd.port.pre.mk.

Reported by:    Fritz Heinrichmeyer <Fritz.Heinrichmeyer@Fernuni-Hagen.de>

Previous commit to use USE_RC_SUBR was incomplete.

Use USE_RC_SUBR.

Use CONFLICTS.

PR:             ports/56118

Use USE_OPENSSL.

Update to 2.1.15.

 * Correct a potential DOS attack in the fud daemon.
 * Arbitron now works again
 * Telemetry logging for mupdate
 * Duplicate Suppression logging for redirect sieve actions
 * A number of bugs in reconstruct have been fixed. also added the -p
   and -x options
 * Better stubbing out of user_deleteacl
 * No longer log any shutdown() failures
 * Improved IPv6 support (for systems with two getnameinfo
   implementations)
 * Misc Documentation Improvements

Update to 2.1.14.

Don't depend on saslauthd.  This is preparation for saslauthd
separation from cyrus-sasl2.

Workaround to fix build on ia64.  I hope it fixes the problem.

Reported by:    bento via kris

Add dependency to OpenSSL.

Update to 2.1.13.

Specify full path of perl explicitly.

PR:             ports/44545
Submitted by:   Pat Lashley <patl+freebsd@volant.org>

Add WITH_SKIPLIST which makes skiplist support for mail/cyrus-imapd2
compatible with mail/cyrus-imapd22.

PR:             ports/51491
Submitted by:   Oliver Eikemeier <eikemeier@fillmore-labs.com>

Update IPv6 patch to 20030426.

add mirror sites.

PR:             ports/50090
Submitted by:   Kimura Fuyuki <fuyuki@hadaly.org>

portlint

Oops, correct usage of LIB_DEPENDS introduced by previous commit.

- Add WITH_BDB_VER for choosing version of Berkeley DB.  For example,
  WITH_BDB_VER=4 for db4.  The default is WITH_BDB_VER=3 which is as
  before.
- The configure script should select correct version of Berkeley DB.

Use REINPLACE_CMD.

De-pkg-comment.

Update to 2.1.12.

Unbreak build on the system where db4 is installed.

Submitted by:   TAKAHASHI Kaoru <kaoru@se.uec.ac.jp>

Add CYRUS_USER and CYRUS_GROUP options to be able to configure
psuedo user for cyrus.

Requested by:   Cyrus Anderson Yunker <cayunker@unity.ncsu.edu>

better workaround against PF_LOCAL.

Wrongly removed lib/sasl/Cyrus.conf instead of lib/sasl2/Cyrus.conf
during deinstall.

Reported by:    bento via kris

- Use PERL_LEVEL to distinguish installed perl version.
- Add WITH_SKIPLIST_MBOX to enable skiplist mboxlist.
- Add WITH_MURDER to enable murder.

Update to 2.1.11.
The release has two security fixes:

        - Fixed some potential buffer overflows in the sieve code
        - Fixed a pre-login buffer overflow in the IMAP parsing code

Approved by:    portmgr

Update to 2.1.10.

Update to cyrus-imapd-2.1.9.

Update to 2.1.8.

BerkeleyDB cleanup - stage 2

Update databases/db3 to 3.3.11, and fix the few ports that need sorting
after the shlib version update, and a slight API change from 3.2.x->3.3.x

Update to 2.1.7.

cyradm didn't show password prompt correctly.

Reported by:    Joseph Scott <joseph@randomnetworks.com>

Update an IPv6 patch to 20020817.
Since there is no functional change at all under FreeBSD,
I don't bump PORTREVISION.

It seems getpeername() returns with no error but doesn't fill struct
sockaddr correctly against PF_UNIX socket under 5-CURRENT.  Because of
this behavior, PF_UNIX socket was always checked by libwrap.  This
work around prevents PF_UNIX socket from checking by libwrap to always
allow LMTP.

Add cyrus-imapd-2.1.5 after repo. copy.