The Cyrus IMAP (Internet Message Access Protocol) server provides access to
personal mail and system-wide bulletin boards through the IMAP protocol.
The Cyrus IMAP server is a scaleable enterprise mail system designed for use
from small to large enterprise environments using standards-based
technologies.
A full Cyrus IMAP implementation allows a seamless mail and bulletin board
environment to be set up across multiple servers. It differs from other
IMAP server implementations in that it is run on "sealed" servers, where
users are not normally permitted to log in. The mailbox database is stored
in parts of the filesystem that are private to the Cyrus IMAP system. All
user access to mail is through software using the IMAP, POP3, or KPOP
protocols.
The private mailbox database design gives the server large advantages in
efficiency, scalability, and administratability. Multiple concurrent
read/write connections to the same mailbox are permitted. The server
supports access control lists on mailboxes and storage quotas on mailbox
hierarchies.
===> The following configuration options are available for cyrus-imapd25-2.5.17_7:
AUTOCREATE=off: Enable autocreate support
BDB=off: Berkeley DB support
CLAMAV=off: Use ClamAV
DOCS=on: Build and/or install documentation
EXAMPLES=on: Build and/or install examples
HTTP=off: Enable HTTP (beta quality)
IDLED=on: Enable IMAP idled support
LDAP=off: Enable LDAP support (experimental)
MURDER=off: Enable IMAP Murder support
MYSQL=off: MySQL database support
NETSCAPEHACK=off: Enable X-NETSCAPE extensions
NNTP=off: Enable NNTP support
PGSQL=off: PostgreSQL database support
REPLICATION=off: Enable replication (experimental)
SNMP=off: SNMP network protocol support
SQLITE=off: SQLite database support
====> GSSAPI Security API support: you can only select none or one of them
GSSAPI_HEIMDAL=off: GSSAPI support via security/heimdal
GSSAPI_MIT=off: GSSAPI support via security/krb5
GSSAPI_BASE=on: GSSAPI support via base system (needs Kerberos)
===> Use 'make config' to modify these settings
To setup mail spool, modify /usr/local/etc/imapd.conf appropriately,
then run /usr/local/cyrus/bin/mkimap.
To run Cyrus IMAPd from startup, add cyrus_imapd_enable="YES" in your
/etc/rc.conf.
Reason:
The BDB option is disabled by default.
If you are using the berkeley cyrusdb backend, we strongly recommend
that you switch to something other than the berkeley cyrusdb
backend. If you want to continue using the berkeley cyrusdb
backend, build the cyrus-imapd25 port yourself with the BDB option
enabled.
mail/cyrus-imapd25: Add support for MIT KRB5 in base
FreeBSD 15 will ship with MIT KRB5 in base. Detect this accordingly.
PR: 287597
exp-run by: antoine
all: drop support for expired FreeBSD 14.0
Simplify expressions for FreeBSD 13.X
Reviewed by: many
Differential Revision: https://reviews.freebsd.org/D46601
Mk/**ldap.mk: Convert USE_LDAP to USES=ldap
Convert the USE_LDAP=yes to USES=ldap and adds the following features:
- Adds the argument USES=ldap:server to add openldap2{4|5|6}-server as
RUN_DEPENDS
- Adds the argument USES=ldap<version> and replaces WANT_OPENLDAP_VER
- Adds OPENLDAP versions in bsd.default-versions.mk
- Adds USE_OPENLDAP/WANT_OPENLDAP_VER in Mk/bsd.sanity.mk
- Changes consumers to use the features
Reviewed by: delphij
Approved by: portmgr
Differential Revision: https://reviews.freebsd.org/D38233
security/clamav: Update to 1.0.0
* Switch to use bundled TomsFastMath library. Upstream made
incompatible change to bundled copy and this makes it impossible to
use external one. They also dropped option to use it.
* Bump PORTREVISION of consumers as shlib version is changed.
* Note that though this is new LTS feature release security/clamav-lts
stays in 0.103.x until either next regular feature release (probably
1.1.0) is released or 0.103.x reaches its EoL.
ReleaseNotes: https://blog.clamav.net/2022/11/clamav-100-lts-released.html
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Fix CONFLICTS entries of multiple ports
There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.
This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.
Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port
(Only the first 15 lines of the commit message are shown above )
The FreeBSD GNOME team proudly presents GNOME 3.28 for FreeBSD.
The offical GNOME 3.28 release notes can be found at
https://help.gnome.org/misc/release-notes/3.28/
Thanks to Antoine Brodin for running the exp-runs.
PR: 229761
For ports that are marked BROKEN on armv6, and also fail to build on
armv7, mark them so.
This is part two of a multipart commit to bring armv7 ports to parity
with armv6.
Approved by: portmgr (tier-2 blanket)
Obtained from: lonesome.com -exp run
- Update devel/libical to version 2.0
- Bump PORTREVISION in all consumers
- mail/claws-mail-vcalendar now builds, remove IGNORE
- Mark devel/libical-glib as BROKEN
Release Highlights
WARNING: Version 2 IS NOT Binary Compatible with Older Versions
Version 2 is Source Compatible with Older Versions
Lots of source code scrubbing
[New] RSCALE support (requires libicu from http://www.icu-project.org)
[New] CalDAV attachment support (draft-daboo-caldav-attachments)
[New] Resurrect the Berkeley DB storage support
[Bug] issue83: Incorrect recurrence generation for weekly pattern
Handle RRULEs better
Handle threading better
PR: 218711
Submitted by: myself
Approved by: maintainer timeout
Add Cyrus IMAP 3.0 series.
Now, it is the third release candidate from the Cyrus IMAP 3.0 series:
3.0.0-rc3.
As a release candidate, it is considered near-stable for production
usage. Interfaces, APIs, features, etc are not likely to change
between now and the full release.
Fix usage of ${PERL5}.
${PERL5} points to a specific version of perl, say, perl5.22.1, it is
fine to use it in a ports Makefile to do Perly things, but ports using
it must use ${PERL}, that points to /usr/local/bin/perl so that if the
minor version is updated, the shebang keep working.
While there, make some ports use shebangfix, regen a few patches, and
bump PORTREVISION where a shebang went from PERL5 to PERL.
PR: 205367
With hat: portmgr
Sponsored by: Absolight
Make it so that the default Perl is always called perl5.
- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
Though you should note that only the default version can be used to
install Perl modules, and the non default Perl versions cannot use the
modules installed via ports if they contain .so as they are installed
in a version specific directory.
Reviewed by: bapt (the Mk bits)
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D3542
- Disable GSSAPI_BASE on 8.X. It seems configure fails to detect
libkrb5 on it. [1]
- Suppress empty share/doc/cyrus-imapd/man directory.
- Since vzic is not built now, we don't need to depend upon glib20.
Spotted by: pkg-fallout [1]
Remove OSVERSION checks that do not make sense any more.
For example (${OSVERSION} >= 900000 && ${OSVERSION} < 900021) is always true,
as is (${OSVERSION} > 900002 || ${OSVERSION} < 900000 && ${OSVERSION} > 800107).
Regarding patches, when an EXTRA_PATCHES is no longer needed, I remove it, when
it is always needed, I renamed it, in one case, I merged two patches.
Differential Revision: https://reviews.freebsd.org/D2209
mail category: Remove $PTHREAD_LIBS
Note: The following ports did not pass check-plist (CP) or stage-qa (QA)
tests. The sendmail port has many problems, but this was already known
by myself as I fixed it properly on DPorts last week. It's a forward
action to submit a PR against mail/sendmail.
* antivirus-milter (CP)
* dk-milter (CP)
* milter-regex (CP)
* sendmail (CP, QA)
approved by: PTHREAD blanket
