- Add CPE info

Approved by:	portmgr blanket

mail category: Remove $PTHREAD_LIBS

Note: The following ports did not pass check-plist (CP) or stage-qa (QA)
tests.   The sendmail port has many problems, but this was already known
by myself as I fixed it properly on DPorts last week.  It's a forward
action to submit a PR against mail/sendmail.

  * antivirus-milter (CP)
  * dk-milter        (CP)
  * milter-regex     (CP)
  * sendmail         (CP, QA)

approved by:	PTHREAD blanket

Remove duplicated NIS option (no functional changes).

Submitted by:	Ilya A. Arkhipov via IRC

- Add rspamd extra patch and option [1]
- Remove obsoleted POST-INSTALL note [2]
- Bump revision since options have been changed

Submitted by:	swappers at gmail.com [1], pi@ [2]

Use openssl from the ports for FreeBSD < 10 and DANE option is enabled.

Do not bump portrevision since DANE is not enabled by default.

PR:		196722
Submitted by:	Gary <freebsd-bugzilla at in-addr.com>

- Update to 4.85
- Add DANE experimental support
- Add EVENT experimental support
- Drop SRS_ALT option as exim cannot work with libsrs2 so srs_alt is the only
option now
- Polish IGNORE messages
- Remove already included patch
- Update documentation slave ports

The ChangeLog/NewStuff/README.UPDATING can be reviewed at:

http://git.exim.org/exim.git/blob/exim-4_85:/doc/doc-txt/ChangeLog
http://git.exim.org/exim.git/blob/exim-4_85:/doc/doc-txt/NewStuff
http://git.exim.org/exim.git/blob/exim-4_85:/src/README.UPDATING

Finally retire USE_PGSQL

Add patch to avoid http://bugs.exim.org/show_bug.cgi?id=1513

Obtained from:	exim git and Victor Ustugov adopted patch

Remove outdated KAS patch and option.

Remove pkg_ workarounds.

Do not bump revision, since the package's content is not changed by this patch.

Submitted by:	ak via private mail

Convert most NO_INSTALL_MANPAGES to USES=imake:noman

With hat:	portmgr

- Move RESETPREFIX to default PLIST_SUB

With hat:	portmgr

mail/libspf2:
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip

(Also some white space fixes in dependent ports)

Approved by:	portmgr (implicit, bump unstaged port)

Update to 4.84.

This is a bugfix only release of exim. The most important fix was introduced in
the
ports by local patch which is not needed now.

PR:		192625
Submitted by:	pi

mail/exim: bump portrevision for mail/opendmarc dependency

PR:		192311

- Add patch recommended by the exim developers to fix mime regression in 4.83
- Remove SA_1024 as it has been adandoned long ago [1]
- Fix message in post-install stage [1]
- Bump revision

Submitted by:	Victor Ustugov via jabber [1]

Rename all patches that contain '::' as a path separator, and use
'__' instead.

net/openldap24-*:
- Convert to USES=libtool and bump dependent ports
- Avoid USE_AUTOTOOLS
- Don't use PTHREAD_LIBS
- Use MAKE_CMD

databases/glom:
- Drop :keepla
- Add INSTALL_TARGET=install-strip

databases/libgda4* databases/libgda5*:
- Convert to USES=libtool and bump dependent ports
- USES=tar:xz
- Use INSTALL_TARGET=install-strip
- Use @sample

- Replace security/gnutls with security/gnutls3 and update to 3.2.15
- Bump PORTREVISION on all ports that depend on security/gnutls and
  adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
  developers)

PR:		191274
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Update to 4.83.

Changes in the port:
- Added new options:
 * DNSSEC: validate peers using TLSA records
 * PRDR: Per-Recipient-Data-Response support
 * CERTNAMES: Check certiticates ownership
 * DSN: Delivery Status Notifications
 * PROXY: Experimental Proxy Protocol
- Enable OCSP stapling by default
- Disable NIS by default
- SRS support is now radio group
- DNSSEC and PRDR are now enabled by default

Changes in exim itself:

Restore srs_alt support.

PR:		191950
Submitted by:	pi

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

- Remove support of libsrs_alt as it is deprecated now
- Bump portrevision

Suggested by:	pi

- Enable compiler flags responsive for exporting symbols to the elf file.
 This is specifically important for DSO modules enabled in exim by default.
 Without these flags modules were unable to use exim's API that has made this
 feature completely unusable. [1]
- Fix minor issue with strip command by passing STRIP_CMD in the MAKE_ENV
- Bump portrevision

Submitted by:	Victor Ustugov <victor at corvax.kiev.ua>

- Disable developers checks for source files: they are not intended for
end-users and
 require perl for build stage.

Do not bump portrevision, as those checks have no influence on the target
package.

- Add runtime dependency on perl for exim utilities [1], [2]
- Support berkeley DB lookups [3]
- Remove unnecessary options checks [1]
- Improve description for EXIMON option
- Bump portrevision

PR:		189019 [2], 181863 [3]
Submitted by:	ak [1], tim at bishnet.net [2], odavydenko at gmail.com [3]

- Fix issue with exim monitor depends
- Correctly name DAEMON option as EXIMDAEMON

Submitted by:	bapt

- Use options knobs [1]
- Group options
- Remove deprecated checks

Submitted by:	ak [1]

- Fix search path for optional dependencies (partially based on [1])
- Enable EXPERIMENTAL_REDIS knob if REDIS option is enabled
- Bump portrevision

Submitted by:	pi [1]

Add new options for exim:

- DMARC: experimental opendmarc support
- REDIS: redis database lookup
- OCSP: ocsp certificates stapling using openssl

- Update extra patch for XCLIENT support:
 * now xclient is parsed by splitting, so xclient handling was rewritten;
 * support xtext decoding;
 * support of [UNAVAILABLE] and [TEMPUNAVAIL] that was broken;
 * announce xclient in ehlo reply for hosts permitted for xclient;
 * use verify_check_host as it seems to be the proper choice now.
- Remove blank lines from pkg-plist [1]
- Bump revision

Submitted by:	bapt [1]

- Support stage
- Update to 4.82.1 (fixes issues with DMARC)
- Simplify plist
- Take maintainership

Reviewed by:	bapt

Bump PORTREVISION on all ports with USE_SQLITE=yes or USE_SQLITE=3 that
have not been bumped yet after the latest libsqlite3.so library version
change.

Approved by:	portmgr (implicit)

Resetting maintainership on ports that have not been staged and without any
pending PR (related to stage)

With hat:	portmgr

2 ports: Use ${TAR} explicitly over ${EXTRACT_CMD}

Approved by:	portmgr (implicit)

Convert all :U to :tu and :L to :tl

Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)

bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore

Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier

With hat:	portmgr

Move {mail,japanese}/p5-Mail-SpamAssassin to &/spamassassin, in the name of
improving accessibility.

I think people who want to just find the port/package and install it are
more likely to look for "spamassassin the program" than "spamassassin the
perl module collection."

Fix properties on pkg-plist

Exim: update to 4.82

New Stuff since 4.80.1 (ftp://exim.inode.at/exim/ChangeLogs/NewStuff-4.82):

 1. New command-line option -bI:sieve will list all supported sieve extensions
    of this Exim build on standard output, one per line.
    ManageSieve (RFC 5804) providers managing scripts for use by Exim should
    query this to establish the correct list to include in the protocol's
    SIEVE capability line.

 2. If the -n option is combined with the -bP option, then the name of an
    emitted option is not output, only the value (if visible to you).
    For instance, "exim -n -bP pid_file_path" should just emit a pathname
    followed by a newline, and no other text.

Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)

- Fix typo

Submitted by:	ubique (via IRC)

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

- Make ports use the libc provided iconv implementation on 10-CURRENT
  after r254273
- Fix a bunch of ports to properly work after this
- Mark converters/libiconv as IGNORE for systems with iconv in libc

Reviewed by:	bapt
Approved by:	portmgr (bapt)
Discussed with:	bapt, bsam (who both contributed ideas and code)

Convert USE_GNOME=pkgconfig to USES=pkgconfig
Convert USE_GMAKE to USES=gmake

mail/exim: fix handling of WITH_MYSQL_VER

 - fix introduction of bogus MYSQL_VER option that appeared after
   blind conversion to OPTIONSng in r320120;

 - drop support for WITH_MYSQL_VER="auto": this is an obsolete setting
   that currently has the same effect as not defining WITH_MYSQL_VER
   at all;

 - don't set WANT_MYSQL_VER based on WITH_MYSQL_VER: setting the
   latter is enough, since we don't insist on any particular MySQL
   version.

PR:		ports/179719
QA page:	http://codelabs.ru/fbsd/ports/qa/mail/exim/4.80.1_2-p1

Fix conversions typos

Reported by:	miwi

- fix PORT_OPTIONS s/)/}/

Convert to new options framework

Rely on bsdtar to autodetermine the format of the distfiles when possible

For a while now bsdtar is able to autotermine compression and archive format.
Let's then use tar directly instead of piping to tar.

Now USE_BZIP2 and USE_XZ only set EXTRACT_SUFX to the right format

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

- Add UPDATING entry for gnutls update
- Chase shlib version bump for dependant ports

Exim: add patch that avoids breaking messages with Spamooborona 1024

SO 1024 sometimes give back new headers with '\r\n' as the end of line
delimiter.  Such result should be treated properly to avoid adding extra
'\n' to the message headers and turning some of them into body.

Update PCRE to 8.32
Introduces the UTF-32 library pcre32
Bump PORTREVISION in dependent ports

Update cyrus-sasl2 to 2.1.26.
This bumps shlib version of libsasl2.

mail/exim: add exim_tidydb_filter for periodic tidydb job

It allows to filter/transform the output from the tidydb that is
sometimes large and not very much suitable for informational mails
from cron.
Feature safe:	yes

mail/exim: upgrade to 4.80.1

This is bugfix-only release, it eliminates remote code execution
in the DKIM code.

Security: http://www.vuxml.org/freebsd/b0f3ab1f-1f3b-11e2-8fe9-0022156e8794.html
QA page: http://codelabs.ru/fbsd/ports/qa/mail/exim/4.80.1
Feature safe: yes

Move the rc.d scripts of the form *.sh.in to *.in

Where necessary add $FreeBSD$ to the file

No PORTREVISION bump necessary because this is a no-op

mail/exim: fix build with SASL

Uncomment only relevant configuration line for SASL libraries
(we're currently using SASL 2.x, so it is -lsasl2).

PR:		169833
Found by:	Richard E. Depew
Pointyhat to:	rea@

mail/exim: upgrade to 4.80

Extracts from the NewStuff,
  ftp://exim.inode.at/exim/ChangeLogs/NewStuff-4.80

 1. New authenticator driver, "gsasl".  Server-only (at present).
    This is a SASL interface, licensed under GPL, which can be found at
    http://www.gnu.org/software/gsasl/.
    This system does not provide sources of data for authentication, so
    careful use needs to be made of the conditions in Exim.

 2. New authenticator driver, "heimdal_gssapi".  Server-only.
    A replacement for using cyrus_sasl with Heimdal, now that $KRB5_KTNAME
    is no longer honoured for setuid programs by Heimdal.  Use the
    "server_keytab" option to point to the keytab.

Handle SEDLIST variables containing commas

... since we're using comma as the separator for the 's' command.

PR: 166180

Bump pcre library dependency due to 8.30 update

In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

mail/exim: upgrade to 4.77

New stuff (from ftp://exim.inode.at/exim/ChangeLogs/NewStuff-4.77):
 1. New options for the ratelimit ACL condition: /count= and /unique=.
    The /noupdate option has been replaced by a /readonly option.

 2. The SMTP transport's protocol option may now be set to "smtps", to
    use SSL-on-connect outbound.

 3. New variable $av_failed, set true if the AV scanner deferred; ie, when
    there is a problem talking to the AV scanner, or the AV scanner running.

 4. New expansion conditions, "inlist" and "inlisti", which take simple lists
    and check if the search item is a member of the list.  This does not
    support named lists, but does subject the list part to string expansion.

mail/exim: upgrade to 4.76

4.76 is the security release that fixes CVE-2011-1764, format string
attack and information leak, both inside the DKIM code.

List of changes (ftp://exim.inode.at/exim/ChangeLogs/ChangeLog-4.76):

PP/01 The new ldap_require_cert option would segfault if used.  Fixed.

PP/02 Harmonised TLS library version reporting; only show if
      debugging.  Layout now matches that introduced for other
      libraries in 4.74 PP/03.

PP/03 New openssl_options items: no_sslv2 no_sslv3 no_ticket no_tlsv1

mail/exim: upgrade to 4.75

From NewStuff-4.75:

 1. In addition to the existing LDAP and LDAP/SSL ("ldaps") support,
 there is now LDAP/TLS support, given sufficiently modern OpenLDAP
 client libraries.  The following global options have been added in
 support of this: ldap_ca_cert_dir, ldap_ca_cert_file, ldap_cert_file,
 ldap_cert_key, ldap_cipher_suite, ldap_require_cert, ldap_start_tls.

 2. The pipe transport now takes a boolean option, "freeze_signal",
 default false.  When true, if the external delivery command exits on
 a signal then Exim will freeze the message in the queue, instead of
 generating a bounce.

mail/exim: update to 4.74

Changelog is at
  http://ftp.exim.org/pub/exim/ChangeLogs/ChangeLog-4.74
Please, note that CVE-2011-0017 is not applicable to FreeBSD,
because setuid() doesn't check RLIMIT_NPROC.

Also fixed the periodic script for tidying the databases: now it won't
produce errors if the lockfile is here, but the actual database file
is gone. [2]

And finally, synced the mirror list to the current one and
pruned old unusable mirrors:
 - ftp.csx.cam.ac.uk: not synced anymore;
 - www.no.exim.org: no DNS record;
 - ftp.demon.nl: no longer mirrors Exim;
 - ftp.freenet.de: mirror of ftp.csx.cam.ac.uk;
 - ftp.esat.net: not synced anymore;
 - ftp.mirrorservice.org: mirror of ftp.csx.cam.ac.uk.

Feature safe: yes
PR: 154323 [1]
Submitted by: Geraint Edwards <gedge@yadn.org> [2],
              Alexander Wittig <alexander@wittig.name> [1]
Approved by: erwin (mentor), renato (mentor)

mail/exim: fix variable substitution

There was an extra '=' sign at the sed substitution
pattern that affected users of make-only options
TRUSTED_CONFIG_LIST and WHITELIST_D_MACROS: Exim
binary won't build if any of these options is set.

Spotted by: tdb
Pointyhat to: rea
Approved by: erwin (mentor)

mail/exim: update to 4.73

Most notably, this version fixes local exim -> root escalation,
CVE-2010-4345.

Port had also gained configurable knob for disabling -D option
and make variables TRUSTED_CONFIG_LIST and WHITELIST_D_MACROS
to fine tune the behaviour of options -C and -D.

New items are documented at
  ftp://exim.inode.at/exim/ChangeLogs/NewStuff-4.73
Changelog is available at
  ftp://exim.inode.at/exim/ChangeLogs/ChangeLog-4.73

Security: e4fcf020-0447-11e0-becc-0022156e8794 / CVE-2010-4345
PR: 152963 [1], 153711 [2]
Submitted by: Alexander Wittig <alexander@wittig.name> [1]
Approved by: garga (mentor)

Grab maintanership

Approved by: erwin (mentor)

Reset krion@FreeBSD.org due to 6 months of inactivity and maintainer-
timeouts.

Hat:            portmgr

- Fix pcre lib linking if nothing adds ${LOCALBASE}/lib to LDFLAGS

PR:             ports/141640
Submitted by:   Artis Caune <Artis.Caune@gmail.com>
Approved by:    maintainer timeout (krion ; 255 days)

Update to 4.72

The changes from the previous release are:

1. TWO SECURITY FIXES: one relating to mail-spools which are
globally writable, the other to locking of MBX folders (not mbox).
These have CVE identifiers CVE-2010-2023 and CVE-2010-2024

2. MySQL stored procedures are now supported.

3. The dkim_domain transport option is now a list, not a single
string, and messages will be signed for each element in the list
(discarding duplicates).

4. The 4.70 release unexpectedly changed the behaviour of dnsdb TXT

"Spamooborona 1024" software by Yandex allows to filter up to 1024
good messages per day for any mailhost. It is to note: 1024 - it is
not the total amount of messages scanned but the only good ones,
which aren't considered as spam. Once 1024 good messages get passed
through the filter, the rest of mail traffic will be passed without
considering spam or ham until the end of the day.

http://so.yandex.ru/companies/so1024.xml

The patch allows use of "Spamooborona 1024" with Exim by using
Local_scan()'s functionality provided by Yandex LLC.

PR:             ports/146215
Submitted by:   Alexey V.Degtyarev <alexey@renatasystems.org>

Begin the process of deprecating sysutils/rc_subr by
s#. %%RC_SUBR%%#. /etc/rc.subr#

Update to 4.71
ChangeLog: http://ftp.exim.org/pub/exim/ChangeLogs/ChangeLog-4.71

Submitted by:   Alexey V. Degtyarev <alexey@renatasystems.org>

Change WITH_DAEMON option description.

Submitted by:   George L. Yermulnik <yz@yz.kiev.ua>, Alexey V. Degtyarev
<alexey@renatasystems.org>

- Mark MAKE_JOBS_UNSAFE

Reported by:    pointyhat

Update to version 4.70
 - Add devel/pcre dependency
 - Add option for checking ACL in DCC
 - Add WITH_DEBUG option
 - Remove Domain Keys option
 - Remove DKIM option

Submitted by:   "Alexey V. Degtyarev" <alexey@renatasystems.org>

Since this port conditionally depends on perl, it needs WANT_PERL
defined before the inclusion of bsd.port.pre.mk.

Hat:            portmgr

Fix build for exim/sqlite

- Convert existing infrastructure to OPTIONS
- Remove deprecated RCORDER, required by FreeBSD-5.x
- Remove deprecated WITH_PWCHECK
- Add option WITH_KAS, which installs mail/libspamtest to use
  Kaspersky Antispam library

Submitted by:   Alexey V. Degtyarev <alexey@renatasystems.org>

- Retire MASTER_SITE_SOURCEFORGE_EXTENDED, it's no longer needed - all mirrors
actually have all distfiles
- Merge all SF mirrors to MASTER_SITE_SOURCEFORGE, resort according to quick
download speed survey
- Fix MASTER_SITES for all port that have used SOURCEFORGE_EXTENTED

Approved by:    portmgr (pav)

Fix dbm->seq loop.

Details: http://lists.exim.org/lurker/message/20090729.134711.ef8c803e.en.html

PR:             ports/137257
Submitted by:   Artis Caune <Artis.Caune@gmail.com>

Add support for XCLIENT command.

More info - http://www.postfix.org/XCLIENT_README.html

PR:             ports/133891
Submitted by:   Alexey V.Degtyarev <alexey@renatasystems.org>

- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).

Fix user/group creation order while installing package.

PR:             ports/130184
Submitted by:   Artis Caune <Artis.Caune@gmail.com>

Bugfix: reinitialize len before calling accept().

PR:             ports/129260
Submitted by:   Maxim Dounin <mdounin xx mdounin.ru>
Bug:            http://bugs.exim.org/show_bug.cgi?id=770

- Bump PORTREVISION due to libspf2 update
- Change lib dependency

Add support for DKIM (DomainKeys Identified Mail).

PR:             ports/127825
Submitted by:   skv
Approved by:    maintainer (krion)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Use pkg-config to determinate if sqlite3 are compiled with threads
- Add USE_GNOME=pkgconfig

Reported by:    pav

Update to 4.69

Remove support for OSVERSION < 5

Update to 4.68

Fix wrong path to config file in previous commit.

Fix building with radiusclient.

PR:             115687

Portlint'ing

Utilize USE_BDB in accordance with Mk/bsd.database.mk

PR:             ports/115427
Submitted by:   Scot Hetzel <swhetzel@gmail.com>

- Remove the DESTDIR modifications from individual ports as we have a new,
  fully chrooted DESTDIR, which does not need such any more.

Sponsored by:   Google Summer of Code 2007
Approved by:    portmgr (pav)

Fix plist.

Submitted by:   pav