The purpose of this mail library is to provide a portable, efficient
middleware for different kinds of mail access. When using the drivers
interface, the interface is the same for all kinds of mail access, remote
and local mailboxes.
===> The following configuration options are available for libetpan-1.10.1_1:
IPV6=on: IPv6 protocol support
LMDB=on: Use LMDB as cache DB
====> Options available for the single CRYPTO: you have to select exactly one of them
GNUTLS=off: SSL/TLS support via GnuTLS
OPENSSL=on: SSL/TLS support via OpenSSL
===> Use 'make config' to modify these settings
databases/lmdb: allow to install both 0.x and 1.x together
LMDB 1.0 and the legacy 0.9 ABI cannot be mixed, the datanase format are
incompatibles as well.
Rename or relocate everything databases/lmdb0 installs so that it no
longer overlaps with databases/lmdb:
- the utilities are now mdb_copy0, mdb_dump0, mdb_load0 and mdb_stat0
- the header is include/lmdb0/lmdb.h
- the linker name is liblmdb0.so, the shared object keeps its ABI name
liblmdb.so.0 so already linked programs are unaffected
- the pkg-config file is lmdb0.pc
A compatibility prefix holding the previous layout is also installed
under ${PREFIX}/lmdb0/ (include/, lib/ and libdata/pkgconfig/) so that
build systems which expect to find lmdb.h and -llmdb relative to a
single directory only need a path change.
Now all ports should migrate to lmdb 1.X and use the lmdb 0.9 port to ease
in the migration path, lmdb, the lmdb 0.x is supposed to get removed at
some point.
Approved by: mat (portmgr)
Reviewed by: mat
Differential Revision: https://reviews.freebsd.org/D60741
databases/lmdb0: Add port for LMDB 0.9.x legacy ABI
LMDB 1.0 introduced an incompatible on-disk format change and subtle
API breakage: applications that compiled cleanly against 1.0 headers
could fail silently at run time. Known affected ports include dns/knot3,
mail/bogofilter, and mail/postfix; the postfix issue has been confirmed
upstream. Linux distributions such as Arch Linux have observed the same
breakage. Samba can also be affected in certain configurations.
Because the regression is not detectable in an -exp build run -- the
postfix failure only manifests at run time, and bogofilter was caught
only because post-build self-tests happen to exercise this path -- we
cannot rely on package builds to validate the 1.0 upgrade.
This commit introduces databases/lmdb0 as a holding port for the 0.9.35
(Only the first 15 lines of the commit message are shown above )
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Let USES=localbase add -L${LOCALBASE}/lib to LIBS instead of LDFLAGS.
USES=localbase:ldflags can be used to set LDFLAGS. Normally LDFLAGS
appears too early on the command line causing some ports to link with
their own libraries in LOCALBASE (if installed) instead of WRKSRC.
Also make use of _USES_POST so -L${LOCALBASE}/lib is added as late as
possible after anything a port Makefile might set. Use _USES_POST
instead of .include in libedit.mk and libarchive.mk so things like
'USES=libedit localbase:ldflags' work correctly.
Fix some issues with LIBS in some ports.
Switch ports that don't support LIBS to localbase:ldflags.
PR: 212987
Exp-run by: antoine
Approved by: portmgr (antoine)
- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
supported by libgnutls-dane and gnutls-cli. Also clarify the option
description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4. Some ports used this library
in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed. Ports that used these have been
updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.
net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.
www/hydra: Mark BROKEN. This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.
PR: 207768
Exp-run by: antoine
Approved by: portmgr (antoine)
USE_GITHUB: For the new support, fix DISTNAME to be more consistent.
When using GH_TAGNAME the DISTNAME would have GH_PROJECT and GH_ACCOUNT in
it. When not using GH_TAGNAME it would not have this. Now both cases
will add in the GH_PROJECT and GH_ACCOUNT.
Add special care to ensure that the DISTVERSION is not added in twice. If
a port does GH_TAGNAME=v${PORTVERSION} it will be added in twice though. For
that case DISTVERSIONPREFIX=v should be set and no GH_TAGNAME should be used.
empty() is used rather than (!defined || !${}) to support fmake.
The purpose of setting DISTNAME at all in these cases is to make it more clear
that the distfile is from *GITHUB* and to avoid collisions if a project were
to be renamed or moved. Without adding in GH_PROJECT and GH_ACCOUNT then there
are real risks that collisions on filenames would happen on renamed or moved
projects, which is fairly common. A GITHUB-generated file may not match
a custom-rolled or git-archive-rolled distfile.
PR: 199069
With hat: portmgr
Testing done: All USE_GITHUB ports without GH_COMMIT were
checksum/fetch/extract/WRKSRC tested.
security/libgcrypt: 1.6.1 -> 1.6.2, bump depends
Changes:
- src/sexp.c (do_vsexp_sscan): Return error for invalid args.
- cipher/md.c (_gcry_md_info): Fix a segv in case of calling
with wrong parameters.
- cipher/primegen.c (_gcry_generate_elg_prime): Change to return an
error code, possible NULL deref in call to prime generator.
- cipher/dsa.c (generate): Take care of new return code.
- cipher/elgamal.c (generate): Change to return an error code. Take
care of _gcry_generate_elg_prime return code.
- ecc: Support the non-standard 0x40 compression flag for EdDSA.
- mpi: Extend the internal mpi_get_buffer.
- mpi: Fix regression for powerpc-apple-darwin detection.
- Fix bug inhibiting the use of the sentinel attribute in src/gcrypt.h.in
(Only the first 15 lines of the commit message are shown above )
- Replace security/gnutls with security/gnutls3 and update to 3.2.15
- Bump PORTREVISION on all ports that depend on security/gnutls and
adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
developers)
PR: 191274
Exp-run by: antoine
Approved by: portmgr (antoine)
mail/libetpan:
- Update to version 1.5, development moved to github
- Convert to USES=libtool, don't install la file
- Install striped version of library
- Allow to compile with OpenSSL from base
- Update homepage address
- Bump affected deskutils/cairo-dock-plugins
mail/claws-mail:
- Update to version 3.10.0
- Convert to USES=libtool tar:bzip2 [1]
- Don't install static plugin files [1]
- Replace GMAKE with MAKE_CMD [1]
Release notes: http://claws-mail.org/news.php
mail/claws-mail-clamd:
- Don't show pkg-message in post-install, staging takes care of that
Submitted by: tijl via private mail [1]
Convert my ports to current standards
- Switch USE_GMAKE to USES=gmake
- Define supported options so users can see them in config dialogs
- Use OPTIONS_SUB for plist alteration
- Convert to options macros for better readability
- Use PORTDOCS where it makes sense
- Add missing dependency on security/libgcrypt when GNUTLS=on
- Use common descriptions for OPENSSL, GNUTLS
- IPv6 option is on by default now
- Set better COMMENT
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
Bump the version of the curl shared library after the ftp/curl update
to 7.19.2.
Bump PORTREVISION, even on the ports that do not have a versioned
dependency, since the binaries will most probably still stop working.
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
