mail/libvmime: Update WWW and clean up pkg-descr

devel/icu: update to 74.1

Changes:	https://github.com/unicode-org/icu/releases/tag/release-74-1
Reported by:	GitHub (watch releases)
PR:		274317
Exp-run by:	antoine (incomplete)
Approved by:	fluffy

devel/icu: update to 73.1

- Temporarily switch to GitHub auto archive (release artifacts are N/A atm)

Changes:	https://github.com/unicode-org/icu/releases/tag/release-73-1
Reported by:	GitHub (watch releases)
PR:		270422
Exp-run by:	antoine

devel/icu: update to 72.1

Changes:	https://github.com/unicode-org/icu/releases/tag/release-72-1
Reported by:	GitHub (watch releases)
PR:		266582
Exp-run by:	antoine

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

mail: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ashish@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam David <adam@FreeBSD.org>
  *  Adam McDougall <mcdouga9@egr.msu.edu>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alex Deiter <tiamat@komi.mts.ru>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alex Perel <veers@disturbed.net>

security/libgsasl: Update to 2.0.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://gitlab.com/gsasl/gsasl/-/blob/master/NEWS

mail/libvmime: Fix build with GSASL 2.0.0

devel/icu: update to 71.1

Changes:	https://github.com/unicode-org/icu/releases/tag/release-71-1
Reported by:	GitHub (watch releases)
PR:		262654
Exp-run by:	antoine
Approved by:	fluffy

devel/icu: update to 70.1

Changes:	https://github.com/unicode-org/icu/releases/tag/release-70-1
Reported by:	GitHub (watch releases)
PR:		258794
Exp-run by:	antoine

devel/icu: update to 69.1

Changes:	https://github.com/unicode-org/icu/releases/tag/release-69-1
Reported by:	GitHub (watch releases)

Remove # $FreeBSD$ from Makefiles.

devel/icu: update to 68.1

Changes:	http://site.icu-project.org/download/68
ABI:		https://abi-laboratory.pro/tracker/timeline/icu4c/
Reported by:	GitHub (watch releases)

Add ICU option

Convert REINPLACE_CMD to patch file

Fix build when devel/icu is installed

PR:		246305
Reported by:	Mohammad S. Babaei <info@babaei.net>

Update LIB_DEPENDS after splitting gsasl library into libgsasl

- Bump PORTREVISION for dependency change

Sort PLIST

- Update pkg-descr
- Take maintainership

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

- Pet portlint
- Fix LICENSE
- Update WWW

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Make ninja opt-out in cmake.mk

Using ninja instead of make (1) can lead to significant speed ups while
building.
Therefore switch from having the ninja generator opt-in to having it opt-out.

Previously cmake-ports that wanted to use ninja could set
    CMAKE_NINJA=yes
now, ports that do not work with ninja can set
    cmake:<existing args>,noninja
Note, that needing this should be an exception and most often points to a broken
cmake of the port.

The ports using cmake were modified
* removed USES=gmake, if ninja is used
* removed MAKE_ARGS, if ninja is used
* added the cmake-argument noninja if necessary

PR:		219629
PR:		213331
Exp-run by:	antoine
Reviewed by:	rakuco
Differential Revision:	https://reviews.freebsd.org/D10748

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

libvmime stages fine with default INSTALL_TARGET

mail/libvmime: Update to v0.9.2

  - Update from snapshot to release 0.9.2
  - Work around missing install-strip target
  - Update pkg-plist
  - re-roll patch
  - Fix compile error in posixSocket

PR:		216999

Return this back to pool, I no longer use this library.

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
  supported by libgnutls-dane and gnutls-cli.  Also clarify the option
  description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4.  Some ports used this library
  in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed.  Ports that used these have been
  updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.

net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.

www/hydra: Mark BROKEN.  This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.

PR:		207768
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Uses/iconv.mk: Set iconv-related CMake variables.

The way we deal with iconv in base and ports across different FreeBSD
releases is complicated: 9.x does not have iconv.h in base, 10.1 has it with
a different prototype for iconv(3) and later versions have the right
iconv(3) prototype. And, in some cases (USES=iconv:{translit,wchar_t}), we
must always use the libiconv port.

This is why there are so many checks in Uses/iconv.mk: we need to know the
situation we currently have in order to decide whether to pull iconv from
converters/libiconv, whether to just use its header (and pull the library
from base) or whether to use everything from base.

r384038 adjusted several CMake-based ports, but did so in a way that was not
very scalable and required a few intrusive patches to some ports. Most ports

Update ports in the [i-m]* category to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight

converters/libiconv:
- Remove const qualifier from iconv(3) to match POSIX:
  http://pubs.opengroup.org/onlinepubs/9699919799/functions/iconv.html
- Patch iconv.h to expose more GNU extensions when LIBICONV_PLUG is
  defined because the base system iconv supports these extensions too.

Add/remove patches to/from ports to call iconv with non-const arguments.

This breaks some ports on FreeBSD 10 because base system iconv.h still has
the const qualifier.  Fix this by letting USES=iconv add a build dependency
on converters/libiconv so ports can use its iconv.h (with LIBICONV_PLUG
defined) instead of the base system iconv.h.

This exposed some ports that link with libiconv when it is available instead
of using libc iconv.  In these cases one of the following changes has been

Cleanup plist

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

- Replace security/gnutls with security/gnutls3 and update to 3.2.15
- Bump PORTREVISION on all ports that depend on security/gnutls and
  adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
  developers)

PR:		191274
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Remove indefinite articles and trailing periods from COMMENT, plus minor
COMMENT typos and surrounding whitespace fixes. A few Makefiles where not
included as they contain Latin-1 characters that break the Phabricator
workflow. Category M.

CR:		D306
Approved by:	portmgr (bapt)

- Convert security/gsasl to USES=libtool, drop .la files
- Bump revisions of dependent ports as gsasl .so version has changed
- Convert USE_BZIP2 and USE_XZ to USES in some ports

Approved by:	portmgr blanket

- Convert USE_BZIP2 to USES
- Use new LIB_DEPENDS syntax
- Switch to USES=libtool, drop .la files

Approved by:	portmgr blanket

- Stage support

Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)

Fix a build.

Fix build.

Per ISO C++03 14.2/4:

When the name of a member template specialization appears after . or ->
in a postfix-expression, or after nested-name-specifier in a qualified-id,
and the postfix-expression or qualified-id explicitly depends on a
template-parameter (14.6.2), the member template name must be prefixed by
the keyword template. Otherwise the name is assumed to name a non-template.

Add an explicit dependency on pkgconf

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

- Add UPDATING entry for gnutls update
- Chase shlib version bump for dependant ports

Chase security/gsasl library update

 - Do not rely on specific gnutls nor gsasl version.
 - Fix clang compilation.

Submitted by:   Mel Flynn <rflynn acsalaska net>

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Chase security/gnutls update and add an UPDATING entry.

Update to 0.9.1.

Chase security/gsasl update

Chase deps shlib version after updating security/gsasl

 - Fix a possible segfault in stringUtils::countASCIIchars()
 - Fix body contents not generating bug caused by stream::reset() won't
   reset EOF condition.

Obtained from:  vmime svn

- Switch SourceForge ports to the new File Release System: categories starting
with M

Chase for latest GNUtls's removal of libgnutls-config.

Bump PORTREVISIONs of the gnutls dependant ports to chase gnutls update.

Mark MAKE_JOBS_SAFE wherever makes sense.

Chase libs for previous security/gsasl update.

Mark as broken on sparc64: does not compile.

Derive CXXFLAG from CFLAG explicitly.  Without this, user supplied CXXFLAG
could cause compile fail due to the lack of -I${LOCALDIR}

Reported/tested by:     Andrei V. Lavreniyuk <andy.lavr reactor-xg kiev.ua>

Update to 0.9.0

- Update to version 0.2.28
- Bump sh lib version on depending ports

PR:             ports/126857
Submitted by:   mm@FreeBSD.org

This port is not broken, it does not compile due to the corrupted header
installed by gnutls, which is now fixed.

- Remove USE_GCC where it can be satisfied with base compiler on following
  FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT

- Mark BROKEN: does not compile with gnutls-2.4.x

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Remove GNUTLS_E_OPENPGP_TRUSTDB_VERSION_UNSUPPORTED after GNUTLS upgrad
in order to fix build.

Reporteed by:   pointyhat via pav

- Chase security/gnutls shlib version bump
- Add an entry to UPDATING

 - Define _GLIBCXX__PTHREADS as a workaround for our gcc's gthr.h,
   which defines _GLIBCXX_GTHREAD_USE_WEAK and causes compilation
   to fail for no good reason.
 - Respect users' CFLAGS setting.
 - Use MASTER_SITE=SF.
 - Bump PORTREVISION.

Now we have a usable gnutls version that can be used with libvmime,
so enable it in build.

Chase libver after security/gsasl update.

Chase increase of security/gsasl shlib version.

Upate to 0.81

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Update to 0.8.0
Add SHA256

PR:             89217
Submitted by:   delphij (maintainer)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

New port

"libvmime is a MIME manipulation library."

PR:             ports/86300
Submitted by:   Xin LI <delphij@freebsd.org>
Approved by:    pav (mentor)