Convert to new options framework

Fix reinstall target by not moving files. Instead copy them.

PR:             ports/166167
Submitted by:   "A.J. Kehoe IV (Nanoman)" <hg3hNqHo@nanoman.ca>
Feature safe:   yes

- mail/mailman [1]
  * Add LICENSE section
  * Add CONFLICTS with japanese/mailman
  * Make use of SUB_FILES
  * Make use of PORTDOCS
  * Apply simple use of OPTIONS
  * Add WITHOUT_NLS knob to make portlint happier
  * Append "MTA = 'Postfix'" to mm_cfg.py.dist.in when defined
    both WITH_POSTFIX and WITH_INTEGRATION at the same time [3]
  * Bump PORTREVISION

- japanese/mailman [2]
  * Switch to Japanized mailman 2.1.14+j7 based on mail/mailman
  * Take maintainership
  * Add CONFLICTS with mail/mailman
  * Update pkg-descr
  * Set PORTEPOCH because 2.1.14.j7 is less than 2.1.14_6

PR:             ports/165404 (based on) [1], ports/165403 [2]
Submitted by:   tota (myself) [1] [2]
Suggested by:   Yoshito Takeuchi [3]
Approved by:    Sunagawa Koji (maintainer) [2]
Dedicated to:   Tokio Kikuchi

In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

Remove comments and optional dependencies for ports which are
about to be removed.

Fix MAIL_GID for Postfix MTA to "nobody"

- Disable gate news by default to prevent lockups on slower machines

PR:             ports/120173
Submitted by:   "Julian H. Stacey" <jhs@berklix.org>
Approved by:    rene (mentor)

Let's try this one again.
- Stop touching files outside WRKDIR before install
- Use USERS and GROUPS -- this time via patch [1]
- Change BROKEN to IGNORE fo incorrect OPTIONS choices
- Use @stopdaemon

PR:             ports/157868
Submitted by:   Guido Falsi <mad@madpilot.net>
Approved by:    rene (mentor)

- Revert previous USERS fix until reworked and tested
- Revert MAIL_GROUP change for Postfix
- Reset maintainership

Approved by:    tabthorpe (co-mentor), wxs (maintainer)

- Fix missing escapes in the rc script.

PR:             ports/157868
Submitted by:   Roland Behme <rb@nugman.de>

- Correct GROUP when postfix OPTION is selected [1]
- Add nobody user and group to UIDs/GIDs for mail/mailman [2]
- Stop touching files outside WRKDIR before install [2]
- Use USERS and GROUPS [2]
- Change BROKEN to IGNORE for incorrect OPTIONS choices [2]
- Use @stopdaemon [2]
- Correct rc script to check for pidfile before attempting kill [2]

PR:             ports/142000
Submitted by:   Adriaan <ratten.adriaan@gmail.com> [1], crees [2]
Approved by:    rene (mentor), wxs (maintainer)

Fix MAILMANDIR macro substitution.

Noticed by:     tota@
Pointyhat to:   me :(

Restore PORTREVISION which I erroneously removed in previous update.

Noticed by:     osa@

Add option for NAMAZU2, off by default so no PORTREVISION bump.

PR:             portts/156296
Submitted by:   TAKATSU Tomonari <tota@FreeBSD.org>

Fix post-install documentation.

PR:             ports/155530
Submitted by:   Thomas A. Limoncelli <tal@whatexit.org>

Add patch missed in previous commit.
Also note that previous commit dropped MD5 from distinfo.

Pointyhat to:   wxs@ :(

Add a patch to fix the XSS vulnerabilities.

PR:             ports/155355
Submitted by:   Hilko Meyer <hilko.meer@gmx.de>
Obtained from: 
http://mail.python.org/pipermail/mailman-announce/attachments/20110218/15500b22/attachment.txt
Security:       64691c49-4b22-11e0-a226-00e0815b8da8

Fix up MASTER_SITES: not available from list.org anymore and add gnu mirrors.

Update to 2.1.14 - note that the HTDIG option is currently broken until
a new patch is released.

Grab this as I use it regularly.

Feature safe:   yes

Reset jmelo@FreeBSD.org due to many months of inactivity and no response
to PRs.

Hat:            portmgr
Feature safe:   yes

Begin the process of deprecating sysutils/rc_subr by
s#. %%RC_SUBR%%#. /etc/rc.subr#

- Switch SourceForge ports to the new File Release System: categories starting
with M

- Add indexing and htdig patches.

- Update to 2.1.12

Changelog:
        Mailman 2.1.12 is a minor bug fix and Python 2.6 compatibility release.

        The minimum Python for this release is Python 2.4 and it is compatible
        with Python through 2.6. The previous Mailman releases are not
        compatible with Python 2.6.

PR:             134442
Submitted by:   miwi
Approved by:    maintainer timeout

- Fix pkg-plist after update.

- Fix message in pkg-message.

Reported by:            Chris St Denis <chris@smartt.com> by email

- Update to 2.1.11.

PR:             ports/126109
Submitted by:   Yarema <yds@CoolRat.org>

- Update htdig patch to 2.1.10.

PR:             ports/123802
Submitted by:   Martin Matuska <mm@FreeBSD.org>

- Update to 2.1.10.

Teach mailman how to utilize postfix's XVERP functionality,
which drastically improves mail delivery performance when
VERP is being used.

In order to exploit the performance gain, one has to choose
'POSTFIX' in the OPTIONS menu, configure postfix with proper
smtpd_authorized_verp_clients settings, then add:

        VERP_STYLE = 'Postfix'

to the mm_cfg.py configuration.

The Postfix style XVERP delivery is disabled by default.

PR:             ports/116847
Approved by:    maintainer timeout

- Make possible to set CONFIGURE_ARGS in another place.

Submitted by:   John Marshall <John.Marshall@riverwillow.com.au> by private
mail.

- Add patch with Slovak translation (OPTIONAL)
- Bump PORTREVISION

PR:             ports/114828
Submitted by:   mm
Approved by:    jmelo (maintainer, private e-mail)

 - Make Python 2.5.1 the default Python version
 - Add significantly better support in bsd.python.mk for working with
   Python Eggs and the easy_install system

Tested by:      pointyhat runs
Approved by:    pav (portmgr)
Most work by:   perky
Thanks to:      pav

- Add courier support.

Submitted by:   Jonathan Pauli <jpauli@istreamimaging.com> (via email)

- Fix postfix MAIL_GID.

Reported on:    ports@

- Unbreak htdig option.

PR:             ports/107688
Submitted by:   Boris Samorodov <bsam@freebsd.org>

- Fix codec error on python 2.5.

PR:             ports/104429
Submitted by:   NIIMI Satoshi <sa2c@sa2c.net>

- Fix postfix MAIL_GID

PR:             ports/105072
Submitted by:   Marshal Newrock <marshal@idealso.com>

- Japanese Codecs in pythonlib bundled with mailman do not work with python 2.5,
change port to use python 2.4.

PR:             ports/104240
Submitted by:   NIIMI Satoshi <sa2c@sa2c.net>
Approved by:    portmgr (erwin)

- Mark htdig option as broken, the patch to mailman 2.1.9 was not released yet.

- Update to 2.1.9.

- Change postconf path to LOCALBASE.

- Fix postfix MAIL_GID.
- Add message to users who uses postfix, should add SMTPHOST entry in mm_cfg.py.

Submitted by:   Adam Weinberger <adamw@FreeBSD.org> (via email)

- Update to 2.1.9rc1 to fix security problems.

Security:      
http://www.vuxml.org/freebsd/fffa9257-3c17-11db-86ab-00123ffe8333.html

- Change to use ?= instead of += to assign MAIL_GID variable. It will fix the
problem when users are seting MAIL_GID variable in make.conf.
- Bump PORTREVISION.

Reported by:    max@ via email.
Approved by:    mnag (mentor)

- Fix mailman start script to honour modified installation directory.
- Bump PORTREVISION.

PR:             ports/98169
Submitted by:   Neil Darlow <neil@darlow.co.uk>
Approved by:    mnag (mentor)

- Fix postfix MAIL_GID.
- Bump PORTREVISION.

Approved by:    mnag (mentor)

- Add conditional in pkg-install/pkg-deinstall to check if the allow file in
cron dir already exists.

Reported by:    Steve Ames <steve@energistic.com> via email
Approved by:    mnag (mentor)

- Add pre-fetch to show build time options.

Approved by:    mnag (mentor)

- Fix mistake in FreeBSD-post-install-notes.

Reported by:    Larry Rosenman via email
Approved by:    mnag (mentor)

- Add OPTIONS to choose MTA integration.
- Remove "make options", it's not necessary.
- Fix/update FreeBSD-post-install-notes doc.
- Fix both pkg-install and pkg-deinstall to add/delete mailman user in
/var/cron/allow
- Use pkg-message as SUB_FILES.

Approved by:    mnag (mentor)

- Take maintainership.

Approved by:    mnag (mentor)

- Update to 2.1.8
- portlint(1)

Security:      
http://www.vuxml.org/freebsd/8be2e304-cce6-11da-a3b1-00123ffe8333.html

Fix plist.

eplace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Update to 2.1.7

- Update HT/DIG integration with Mailman for those that need it. No need to
  bump portrevision since it affects nobody who already is running mailman.
    Patches submitted by Brad Kollmyer <bradk AT vitalsoft.com> and
  Frank Wancho <fwancho AT WHC.NET>
- Drop maintainership
- Add SHA256 sums (me)
- Pet portlint (rmdir -> ${RMDIR}) (me)

PR:             ports/90407
Submitted by:   maintainer

- Install new documentation

PR:             ports/82090
Submitted by:   TAOKA Fumiyoshi <fmysh@iijmio-mail.jp>
Approved by:    Vivek Khera <vivek@khera.org> (maintainer)

- Update to 2.1.6

PR:             ports/81814
Submitted by:   Vivek Khera <vivek@khera.org> (maintainer)

- Fix a security problem in private mailing list archives could allow anyone to
  read any file on web server.
- Minor port changes

PR:             ports/77364
Submitted by:   Vivek Khera <vivek@khera.org> (maintainer)
Security:       CVE number CAN-2005-0202

Bug Fix: A newly created mailman 2.1.5 list will email bogus moderator
requests until a genuine one has been handled.

Reference:
<http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq03.038.htp>

Bump PORTREVISION

Approved by:    maintainer

Fix UID/GID in options.

PR:             ports/68936
Submitted by:   Chris Pepper
Fixed by:       Vivek Khera (maintainer)

Update to 2.1.5.

PR:             ports/67002
Submitted by:   Vivek Khera <vivek@khera.org> (maintainer)
Reviewed by:    Sunagawa Koji <koj@ofug.net>
Committed at:   10th EBUG Meeting in Tokamachi City, Niigata, Japan

SIZEify (maintainer timeout)

Adapt as MASTER PORT for new SLAVE PORT(japanese/mailman).
No feature change.

Approved by:    Vivek Khera <vivek@khera.org> (maintainer)

Update to 2.1.4.

PR:             61083
Submitted by:   maintainer

- Update htdig patch to 0.5
- Bump PORTREVISION

PR:             60513
Submitted by:   Nils Vogels <nivo@yuckfou.org>
Approved by:    maintainer

- Add WITH_HTDIG knob to enable htdig integration
- Start using DIST_SUBDIR because of the funkyness of the patch names
- Tweak pkg-plist (duplicate @dirrm/@unexec rmdir, use DOCSDIR, etc.)
- Do not bump PORTREVISION: The default built binaries are unchanged

PR:             57877
Submitted by:   Scott Lambert <lambert@lambertfam.org>
Approved by:    maintainer

- Update to version 2.1.3
- Correct notes on FreeBSD Postfix integration

PR:             57364
Submitted by:   Vivek Khera <vivek@lorax.kciLink.com> (maintainer)

o Correct missing some files in pkg-plist.
o The recommended GID for postfix is updated.
o Change MAINTAINERship as new address.

PR:             ports/56014
Submitted by:   Vivek Khera <vivek@khera.org> (maintainer)

o Update to 2.1.2.
o Take MAINTAINERship to submitter.

PR:             ports/55160
Submitted by:   Vivek Khera <khera@kcilink.com>
Approved by:    maintainer timeout (a long time)

Change dependency from chinese/pycodec to converters/py-cjkcodecs.

Submitted by:   "statue" <statue@freebsd.netlab.cse.yzu.edu.tw>
Approved by:    maintainer (implicitly)

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

- Update to version 2.2.1, which includes a fix to a cross-site scripting
  vulnerability.
- Add a file, installed to $DOCSDIR, with more explicit post-installation
  instructions.
- Update $PKGMESSAGE to point to this new file.
- Add more explicit warnings in various places that MAIL_GID *must* be set at
  build time if Mailman is to be used with an alternate (non-Sendmail) MTA.
- Bring port in line with other similar ports by NOT explicitly depending on
  Apache.  This is both more maintainable and allows the user greater scope
  in setting up a custom configuration, including the use of an alternative
  web server.  (Also, Mailman _can_ be used without a web server.)
- Clean up which documentation files get installed to $DOCSDIR.

- Install the Mailman favicon, which had been omitted.
- Refrain from installing the GNU logo, which is not used by this port
  anymore.
- Bump $PORTREVISION

Submitted by:   Vivek Khera <khera@kcilink.com>, Neil Darlow <neil@darlow.co.uk>

- Update author's email address in $DESCR.
- Update $PKGREQ to depend explicitly on Python >= 2.1.3, and not just >= 2.1
- Document required value of $MAIL_GID for Exim4.
- Substantial rewrite of $PKGINSTALL:
  - Simplified layout.
  - More extensive error checking.
  - More expressive and user-friendly output.
- Substantial rewrite of $PKGDEINSTALL:
  - Simplified layout.
  - More expressive and user-friendly output.
  - Delete %%MAILMANDIR%%/data/last_mailman_version in DEINSTALL, and restore
    it in POST-DEINSTALL if the entire Mailman installation has not been
    removed.  This file is required by Mailman's update script (run as part
    of the installation procedure) to update active mailing lists.
  - Delete the errorlog if it is the only existing logfile.  This will
    finally allow the mailman port/package to be completely and cleanly
    deinstalled when there are no active lists or updated configuration.
- Bump $PORTREVISION, with apologies to those tracking the port.

It should now finally be possible to update a Mailman installation with
active mailing lists simply by deinstalling the port/package, and
reinstalling a later version (or by using portupgrade(1)).  There are still
no guarantees, though, and a backup is thorouhly recommended.

- Add the patch that was accidentally omitted from the previous commit.  :-(

- Add dependency on www/lynx, required for Mailman's mail filtering feature.
- Add patch to Mailman/Defaults.py.in, to correct path to lynx and various
  MTAs.
- Change default $MAIL_GID and $CGI_GID values from numerical GIDs to group
  names.
- Minor change to $PLIST to ensure clean deinstallation.
- Bump $PORTREVISION

Submitted by:   Jan Siml <jsi@jules.de> (Lynx dependency)

- Update to the long-anticipated version 2.1

- Overdue update to version 2.0.13, a minor bugfix release
- Refrain from invoking ${PERL}
- Call Mailman's distributed check_perms script post-installation to fix file
  permissions instead of doing so manually.  This is more modular and will
  greatly ease maintenance of the port.  It implies a level of trust in
  check_perms... but then, installing and running any 3rd party software
  implies a level of trust.

- Update to version 2.0.12
- Update $PKGDEINSTALL so that running Python processes beloning to mailman
  user should be killed correctly upon port/package deinstallation, even when
  the version of Python had been updated since the port/package was
  installed.
- Fix a small oversight in $PLIST to allow clean package installations (i.e.
  where there is not an existing mailman user) to set file permissions
  correctly.

- Update to version 2.0.11 (important security fix)

PR:             38652
Submitted by:   Brandon D. Valentine <bugs@geekpunk.net>

- Work around a very obscure but potentially severe security problem.
  Should a user...
  - use su(1) or sudo to gain root privileges in such a way that his own
    environment is maintained, and
  - should that user have the variable USERNAME defined in his environment to
    point to his own username (not entirely unlikely), and
  - should the user install the Mailman port and immediately deinstall it,
  ... his own userid will be deleted by $PKGDEINSTALL.
  The short-term fix implemented here is to munge the names of the variables
  used by the port's Makefile.
- Correctly list image directory in $PLIST, even if the user changes it from
  the default.
- Add a WITH_APACHE2 knob and document it.
- Bump PORTREVISION

Submitted by:   Volker Stolz <vs@lambda.foldr.org> (security issue)

- Update to version 2.0.10

- Update to version 2.0.9
- Correctly kill running Mailman processes in $PKGDEINSTALL

- Fix a nasty typo.    

- Add missing $CONFIGURE_ARGS.  (Whoops again!)   - Actually install the images
for Mailman's web front-end to     ${PREFIX}/www/icons, instead of depending on
the user to do this in a     post-installation step.  Add a new build-time
variable to control the     location where these images are intstalled.   -
Gratuitous change:  Change the GNU logo and link in the footer of most     pages
in Mailman's web front-end to a "Powered by FreeBSD" logo, and a link     to the
FreeBSD home page.  This was accomplished by:     - Patching the source to allow
for multiple footer bars based on a new       configuration variable LOGO_OS. 
If LOGO_OS is set to 'FreeBSD', the       FreeBSD footer will be displayed;
otherwise, it reverts to the default       GNU footer.     - Set LOGO_OS to
'FreeBSD' in the installed Defaults.py  (The user may       override this in
mm_cfg.py)   - Bump $PORTREVISION again.  (Sorry guys.)    

- Just another checkpoint commit in the cleanup of the Mailman port.   - Add a
(non-standard) $PKGOPTS file (currently $FILESDIR/pkg-opts) to     document the
user configurable build time variables supported by the port.     Add a target
"options" to Makefile to display build time options in a human     readable
format.  Remove reams of comments from Makefile - superseded by     $PKGOPTS.  
- Clean up the killing of running qrunner processes in $PKGDEINSTALL.   - Bump
the $PORTREVISION.  (Yes, again.)    

- Use MAIL_GID of 26 (mailnull) instead of 1 when installing Mailman to work    
with Sendmail, if on a recent $OSVERSION.  (Whoops!)     - Submitted by:      
Richard Kiss <kiss@hhn.com>   - Clarify $PKGMESSAGE and output of $PKGDEINSTALL
somewhat.   - Correctly handle Mailman config file (mm_cfg.py) in $PLIST when   
 deinstalling port/package.   - Bump PORTREVISION again.    

- Add MAIL_GID for Postfix, accidentally omitted from previous commit.    

- Cleaning up the Mailman port, Step 3.   - Add a $PKGDEINSTALL script to allow
the port to clean up after itself   - Automatically create Mailman user's
crontab(5) entry upon port/package     installation, and remove it upon
deinstallation.   - Intended $PKGINSTALL according to personal taste.  Converted
tabs to     spaces.   - Remove some extraneous comments from the port's
Makefile.  (Oops)   - Further streamline @exec's in $PLIST.   - Bump
PORTREVISION   - The reworking of this port is an ongoing process - Mailman
users, please     bear with me!    

- Cleaning up the Mailman port, Step 2.   - Move creation of user/group from
$FILESDIR/config.sh to $PKGINSTALL to     ensure they are created if installed
from package.   - Switch to using uid/gid which are not yet registered in
section 15.15 of     Porter's Handbook.   - Add @exec statements to $PLIST to
ensure all necessary directories are     created with the correct modes if
installed from package.   - Bump PORTREVISION.   - More to follow...    

- Interim update to version 2.0.8 (which contains important security fixes),    
maintaining most of the port's existing structure.  A more comprehensive    
restructuring of this port is in the works.   - Assume maintainership, pending
any objections from -ports.    

Set MAINTAINER to ports@.   I do not use this program anymore.    

Allow mail-gid to be overwritable.    

Utilize DATADIR and DOCSDIR.    

Update to 2.0.5    

Allow to override cgi-gid.