===> The following configuration options are available for mew-6.11:
DATABASE=off: Support database feature (with Ruby & Sqlite3)
DOCS=on: Build and/or install documentation
STUNNEL=on: Support TLS feature using stunnel
===> Use 'make config' to modify these settings
mail/mew: Update 6.10 => 6.11, take maintainership
Changelog:
https://github.com/kazu-yamamoto/Mew/blob/v6.11/RELEASENOTE.md
* Byte compilation of elisp has been disabled.
This aligns with the overhaul of the Emacs Lisp ports framework in
bc45b7ec88.
* This excludes the installation of elisp files for win32.
PR: 295220
Sponsored by: UNIS Labs
Emacs Lisp ports framework: Overhaul
This overhaul introduces four key changes to the elisp ports framework:
1. Remove support for packaged byte-compiled elisp.
The primary motivation is to remove a large number of flavor-specific
packages and to simplify the ports tree. As an example, supporting
byte-compiled elisp for devel/tablist required six packages, one for
each flavor of editors/emacs and editors/emacs-devel. With over 100
elisp ports and requests for new Emacs flavors, this was
unmanageable.
2. Install configuration to integrate with Emacs's native compilation
machinery, allowing elisp from ports to be compiled into the standard
(Only the first 15 lines of the commit message are shown above )
*/*: Return to pool
I'll be away from keyboard soon and am not sure if I will return. So
return all ports that I currently maintain to pool hoping new
volunteers take care of them.
Chase major version update of editors/emacs-devel
Bump PORTREVISION of most USES=emacs ports after editors/emacs-devel
major version increased from 30 to 31.
Sponsored by: The FreeBSD Foundation
Chase editors/emacs update to 29.4
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish, yasu
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D45705
Chase editors/emacs update
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D44492
*/*: Chase editors/emacs update
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D43615
editors/emacs: Update to 29.1
* Update Canna patch to the one for Emacs 29.
* Add new options PGTK, SQLITE3, TREESITTER and WEBP. SQLITE3 and
TREESITTER are ON by default. PGTK and WEBP options are excluded
from nox flavor.
* CARGO option doesn't imply XFT but prevents it. It is caused as a
result of adding pure GTK support (PGTK option).
* OTK options doesn't imply XTF any more. It is also caused as a
result of adding pure GTK support.
* Update NATIVECOMP option so it specifies ahead-of-time compilation
via the configure argument.
* Remove "experimental" from NATIVECOMP_DESC.
* Add print/freetype2 and x11-fonts/fontconfig to CAIRO_LIB_DEPENDS
and GTK3_LIB_DEPENDS. Necessary to link emacs binary with shared
(Only the first 15 lines of the commit message are shown above )
mail/mew: Update to 6.9
* Take maintainership as there are already 3 successive maintainer
timeout in the past.
* Switch to DISTVERSION.
* Set DISTVERSION to 6.9 and explicitly set DISTFILES. At first
upstream released source archive as 'mew-6.9.tar.gz'. But issue that
results in installation error is reported. So he fixed it and
release new source archive as 'mew-6.9a.tar.gz'. And he said the
latter is rerolled source archive of version 6.9.
* Remove patch-no-native-compile as Mew works fine with native
compilation now.
* Install elisp and image files to EMACS_VERSION_SITE_LISPDIR.
* Unconditionally install mew.ja.info as per section 5.17.4 of
Porter's Handbook.
* Pet portclippy.
* Tidy up Makefile with portfmt.
ReleaseNotes: https://github.com/kazu-yamamoto/Mew/blob/v6.9/RELEASENOTE.md
PR: 269532
Approved by: maintainer timeout
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
mail: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ashish@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam David <adam@FreeBSD.org>
* Adam McDougall <mcdouga9@egr.msu.edu>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Deiter <tiamat@komi.mts.ru>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alex Perel <veers@disturbed.net>
(Only the first 15 lines of the commit message are shown above )
Fix CONFLICTS entries of multiple ports
There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.
This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.
Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port
(Only the first 15 lines of the commit message are shown above )
mail/mew: Prevent .el files from being native compiled
Mew doesn't work correctly if Emacs supports native compilation and
.el files are compiled to .eln ones. So prevent .el files from being
native compiled by adding following lines at the end of them.
;; Local Variables:
;; no-native-compile: t
;; End:
PR: 258171
Approved by: maintainer timeout (> 28days), meta (mentor)
editors/emacs: Update to version 27.1
Please refer to the 20200811 UPDATING entry when upgrading
dependent (*-emacs26-*) ports.
Port changes:
- depend on math/gmp
- match upstream by turning CAIRO, HARFBUZZ, and JSON options and on and
turning MAGICK off by default
- remove OPENMP check for graphics/ImageMagick as the openmp is now
included in base
- update EMACS_VER in Mk/Uses/emacs.mk
- bump USES=emacs ports or remove BROKEN for net-im/jabber.el and
deskutils/howm, which now build
Submitted by: HIROSE Yuuji <yuuji@gentei.org> (canna patch)
Reviewed by: ashish
Differential Revision: https://reviews.freebsd.org/D23966
editors/emacs-devel: Update to latest master branch commit, 4f2b415
This update includes an Emacs major version change from 27.0.50 to 28.0.50.
Ports that may depend on editors/emacs-devel must chase this update
with a PORTREVISION bump.
Submitted by: ashish (maintainer)
Differential Revision: https://reviews.freebsd.org/D23012
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
mail/mew: update 6.7 -> 6.8
- Mew now supports Emacs 24.3 or later only
- Supporting stunnel 5.
- Supporting GnuPG 2.1.23 or later.
The command name should be "gpg" instead of "gpg2".
Put the following to your "~/.gnupg/gpg.conf".
no-auto-key-retrieve
auto-key-locate local
- Using LibreOffice (soffice) on Unix by default
- Regenerate patches to fix portlint warnings.
PR: 228861
Submitted by: Yasuhiro KIMURA <yasu@utahime.org>
Approved by: hiroto.kagotani@gmail.com (maintainer timeout)
Relnotes: http://www.mew.org/en/relnote/release.html
Flavorize and modernize Emacs ports
- Convert USE_EMACS to USES=emacs
- Remove editors/emacs-nox11 (refer to nox flavors of editors/emacs and
editors/emacs-devel)
- Permit default Emacs flavor to be specified in make.conf
- Rename japanese/migemo-emacs23 to japanese/migemo-emacs
- Update and simplify audio/emms and fix build on FreeBSD 10 [1]
- Update databases/bbdd and fix build on FreeBSD 10 [1]
- Update editors/emacs-devel
- Ensure Makefile shell commands that change directory are executed in a
subshell
- Silence some portlint warnings
[1] By not depending on base texinfo
PR: 225404
Reviewed by: antoine
Approved by: portmgr (mat) ashish (maintainer)
Differential Revision: https://reviews.freebsd.org/D13506
The output of tools like awk, date, sort, tr,... depends on the current
locale set by the user. Add LANG=C and LC_ALL=C at the beginning of
bsd.port.mk and export them so all commands are executed with the C locale.
LC_ALL=C overrides all other LC_* variables. LANG is used by setlocale(3)
as default value for LC_* variables, so normally it isn't used when LC_ALL
is set, but there's code out there that looks at LANG directly so it's safer
to set it as well. The only commands not captured by this are !=
assignments before any inclusion of bsd.port.*mk.
Introduce USE_LOCALE=<locale> that adds LANG=<locale> and LC_ALL=<locale> to
CONFIGURE_ENV and MAKE_ENV so upstream build systems can be executed with a
different locale (e.g. USE_LOCALE=en_US.UTF-8).
PR: 215882
Exp-run by: antoine
Approved by: portmgr (antoine)
Update to 6.7. Changes include:
* supporting GnuPG 2.1 for master password.
* stop using discard-input.
* Fix mew-scan-body() chips the last byte of the base64 decoded body
* Match exactly on an email address to specify a user ID to GnuPG
* Do not use exit|return with negative status code to fix bashism
* Remove the trailing whitespace of w3m
This whitespace was causing lines to wrap even when the text itself
was correctly wrapped to the window width.
* Drag and drop improvement in Windows environment
UNC path files can be attached to draft mode by drag and drop.
* updating auxiliary.el
* Choose last preferred part in multipart/alternative
* Increase mew-header-reasonable-size to 10000
* mew-summary-refile-report: Show warning when mew-header-reasonable-size
does not cover the header of the selected message.
Approved by: Hiroto Kagotani (maintainer)
- Add LICENSE.
- Remove %%PORTDOCS%% in pkg-plist and use PORTDOCS in Makefile instead.
- Fix a wrong pathname in pkg-message.
- Use {opt}_* variables instead of ".if ${PORT_OPTIONS:Mfoo}".
- Remove patch-Makefile.in because it is no longer needed.
Approved by: hiroto.kagotani@gmail.com (maintainer)
GNU Emacs updates
editors/emacs:
- Update to 24.3
- Update CANNA patchset[1]
- Unbreak ARM support by using the patch from emacs-devel port
- Add missing INSTALLS_ICONS[2]
- Remove a patch which is already integrated upstream
- Fix Makefile header
editors/emacs-devel:
- Update to bzr revision 112178
- Fix Makefile header
- Add missing INSTALLS_ICONS[2]
(Only the first 15 lines of the commit message are shown above )
Changes to editors/emacs and Mk/bsd.emacs.mk were taken from
PR/137956 by Ashish SHUKLA (thanks!). [1]
Those ports which define EMACS_PORT_NAME to be "emacs21" were
not touched (this time). They may be converted to the new
world order by removing the above mentioned assignment.
Four ports were marked as BROKEN with EMACS_PORT_NAME=emacs23
(they do not compile):
. lang/bigloo;
. mail/wanderlust;
. mail/wanderlust-devel;
. www/emacs-w3m.
Three ports were marked as IGNORE with EMACS_PORT_NAME=emacs23:
(Only the first 15 lines of the commit message are shown above )
Fix the following rough edges:
- Fix MASTER_SITES.
- Remove redundant DOCSDIR and CONFIGURE_TARGET.
- Use EMACS_LIBDIR for non-lisp files for consistency.
- Use --with-elispdir for EMACS_SITE_LISPDIR.
- Separate the Japanese info files by using NOPORTDOCS.
- The mew-icon-directory variable is set automatically
even in XEmacs now.
Approved by: Hiroto Kagotani (maintainer)
PR: ports/107438
- Fix possibility of "infinite make fork" when "Registering install for ..."
EMACS ports. [1]
- Allow building a port as root using an NFS-mounted /usr/ports if the
server maps root to a UID other than root. [2]
- Make 'BROKEN' and 'IGNORED' ports exit their "make install" with a fail
status rather than success. [3]
- Improve behavior when dealing with versioned dependencies. [4]
- Fix false positives in check-conflicts target. [5]
- Remove obsolete bzip2 code. [6]
(Only the first 15 lines of the commit message are shown above )
Reset MAINTAINER to ports@.
We cannot contact them for a long time.
Discussed with: hrs
Approved by: kiri(blanket), mita(blanket),
shige(blanket), taoka(blanket)
Move the ancient emacs 19.x port from editors/emacs to
editors/emacs19, and update the main emacs port to 21.x by copying from
editors/emacs21. Retire the editors/emacs21 port.
PR: ports/24983
Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command; the ECHO
macro is set to "echo" by default, but it is set to "true" if make(1) is
invoked with the -s option while ECHO_CMD is always set to the echo command.
(1) Add new variable, XFREE86_VERSION, to specify which version of XFree86
(3 or 4) to depend to when USE_XLIB is set. XFREE86_VERSION defaults to 3
for now, but adventurous users can override it in /etc/make.conf. When
XFREE86_VERSION=3, USE_XLIB will add a dependency to x11/XFree86; when it
is set to 4, the dependency will be to x11/XFree86-4-libraries. When
XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS hacks
to avoid messing with XFree86 are turned off.
