Remove expired ports:
2018-12-19 net/py-libstorj: Broken for more than 6 months
2018-12-20 net/xferstats: Uses obsolete glib12
2018-12-20 net/wmlj: Uses obsolete glib12
2018-12-20 net/ipsorc: Uses obsolete glib12
2018-12-20 net/bsdproxy: Uses obsolete glib12
2018-12-20 net/gini: Uses obsolete glib12
2018-12-21 net/netatalk: Outdated branch of netatalk; use net/netatalk3 instead
2018-12-20 net/nocatsplash: Uses obsolete glib12
2018-12-20 net/jags: Uses obsolete glib12
2018-12-19 net/scribe: Broken for more than 6 months
2018-12-20 net/libnetdude: Uses obsolete glib12
2018-12-20 net/nepim: Uses obsolete glib12
2018-12-20 emulators/generator: Uses obsolete glib12
2018-12-19 emulators/py-nova: Broken for more than 6 months

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Deprecate most glib12 consumers

With hat:	portmgr

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

- Add LICENSE
- Strip libraries

Cleanup plist

devel/glib12 x11-toolkits/gtk12:
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Remove patches that renamed include directories and libraries so they
  didn't conflict with early development versions of glib/gtk 2.0

Convert to USES=libtool and disable static plugins

Remove indefinite articles and trailing periods from COMMENT, plus minor
COMMENT typos and surrounding whitespace fixes. A few Makefiles where not
included as they contain Latin-1 characters that break the Phabricator
workflow. Category M.

CR:		D306
Approved by:	portmgr (bapt)

- Stage support
- Convert to USES

Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- remove MD5

Sync to new bsd.autotools.mk

For ports maintained by ports@FreeBSD.org, remove names and/or
e-mail addresses from the pkg-descr file that could reasonably
be mistaken for maintainer contact information in order to avoid
confusion on the part of users looking for support. As a pleasant
side effect this also avoids confusion and/or frustration for people
who are no longer maintaining those ports.

- Switch SourceForge ports to the new File Release System: categories starting
with M

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Use libtool port instead of included version to avoid objformat a.out botch

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include irc/ japanese/ java/ lang/ mail/ math/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Use INFO macro

- Add SHA256

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

change the libtool version to use from 1.3 to 1.5

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

SIZEify.

libtool uber-patch

* kill devel/libtool and move to devel/libtool13, upgrading to 1.3.5
* upgrade repo-copied devel/libtool14 to 1.4.3
* break out libltdl into its own separate port
* move to version-numbered binaries/scripts (ie: there is *no* 'libtool'
  any more -- USE_LIBTOOL and USE_LIBTOOL_VER are your friends)

Approved by:    portmgr (kris) - for the bsd.port.mk hooks
Tested by:      bento 4-exp builds (repeatedly)

Remove USE_GNOMENG.

De-pkg-comment.

Convert USE_GLIB into USE_GNOMENG+USE_GNOME.

o update to 0.2.4a   o typo fix: freebsd -> FreeBSD    

Drop maintainership    

Fix pkg-plist    

Update to 0.1.90.    

Update to version 0.1.4.2    

Massive style enforcement - use ^I instead of spaces for variables identation.  
 

New port of POP3Lite.   POP3Lite is a flexible, RFC 1939  compliant Post Office
Protocol v3 daemon.