===> The following configuration options are available for postgrey-1.37_4:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
NETWORK LISTENER WARNING
------------------------
By default, the startup script specifies "--inet=10023" in postgrey_flags.
This makes postgrey listen on localhost TCP port 10023. If you want to use a
unix socket, a different port, or an external interface, please see the
postgrey(1) man page about the use of the --inet and --unix flags and set
postgrey_flags as appropriate.
THIRD-PARTY DISCLOSURE WARNING
------------------------------
The default text used when postgrey returns a "greylisted" response includes a
URL of the form:
http://postgrey.schweikert.ch/help/example.com.html
where example.com is the FQDN of the RCPT TO address of the greylisted message.
This is a potential information disclosure in the following ways:
- Indicates you are using David Schweikert's postgrey;
- Someone who goes to that link may disclose to the website's operator that
they sent email to your domain.
If you do not want this behaviour, you can override the default text by
setting --greylist-text in postgrey_flags. An example of a generic setting
would be --greylist-text='4.7.1 Greylisted'.
Please see the "Greylist Text" section of the postgrey(1) man page for more
information.
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
mail: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ashish@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam David <adam@FreeBSD.org>
* Adam McDougall <mcdouga9@egr.msu.edu>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Deiter <tiamat@komi.mts.ru>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alex Perel <veers@disturbed.net>
(Only the first 15 lines of the commit message are shown above )
mail/postgrey: fix conflict of PG_USER variable with PostgreSQL
Please note:
20180416:
AFFECTS: users of mail/postgrey
AUTHOR: ports.maintainer@evilphi.com
If you use any of the optional make.conf variables to specify the
postgrey user, group, db dir, or run dir when building the port, you will
need to change the prefix from PG_ to POSTGREY_*. The variables were
renamed to solve a namespace collision with the PostgreSQL ports.
PR: 227261
Submitted by: Melissa Pilgrim <ports.maintainer@evilphi.com> (maintainer)
Reported by: Piotr Kubaj <pkubaj@anongoth.pl>
- Update to version 1.35
- Add LICENSE
- Remove pkg-install script, move directory creation to pkg-plist
- Use @sample keyword for config files
PR: 194019
Submitted by: TEUBEL Gyorg y<tgyurci@gmail.com>
Approved by: maintainer
--This line, and those below, will be ignored--
> Description of fields to fill in above: 76 columns --|
> PR: If a Bugzilla PR is affected by the change.
> Submitted by: If someone else sent in the change.
> Reviewed by: If someone else reviewed your modification.
> Approved by: If you needed approval for this commit.
> Obtained from: If the change is from a third party.
(Only the first 15 lines of the commit message are shown above )
According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.
This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.
Approved by: portmgr (bapt)
- Patch postgrey to use PGY_GROUPNAME by default
- Don't show OPTIONS dialog for just DOCS option
- Tidy up port Makefile
- Rework rc script
- Add UPDATING message and pkg-message to inform users about the
rc script changes
PR: ports/178644
Submitted by: Darren Pilgrim <ports.maintainer@evilphi.com> (maintainer)
- Add USES=shebangfix
- Convert to new options framework
- Use space for WWW line in pkg-descr
- Trim Makefile headers
PR: ports/178400
Submitted by: Nikolai Lifanov <lifanov@mail.lifanov.com>
- Fix package installation; pre-install part of script depends on postgrey
username existing.
PR: ports/166943
Submitted by: Darren Pilgrim <ports.maintainer@evilphi.com> (maintainer)
- While here, use packages for perl dependencies to avoid requiring bsd.perl.mk
Approved by: Darren Pilgrim <ports.maintainer@evilphi.com> (maintainer)
In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().
In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.
- Add LICENSE support (postgrey is under GPLv2).
- Make pkg-install, pkg-plist and the rc script use variables defined
in the Makefile.
- Start using our own ETCDIR instead of co-opting postfix.
- Warn users about relocating the whitelists due to the ETCDIR move.
- Set postgrey's default group (--group) to the port's value.
- Add rc script postgrey_dbdir and postgrey_options variables to
avoid duplication of defaults when adding command-line flags.
- Remove redundant flags from the rc script postgrey_flags variable.
PR: ports/162188
Submitted by: Darren Pilgrim <ports.maintainer@evilphi.com> (maintainer)
Reviewed by: myself
Remove whitespace from line endings in pkg-plist files.
Those spaces used to hinder searching for the corresponding files
with portsearch -f '/FILENAME$' for obvious reasons.
Although currently portsearch removes those spaces itself remove
them anyway.
Inspired by: ports/94078
Approved by: portmgr (during freeze: krion, then kris advised to wait; at
present: erwin)
Remove the FreeBSD KEYWORD from all rc.d scripts where it appears.
We have not checked for this KEYWORD for a long time now, so this
is a complete noop, and thus no PORTREVISION bump. Removing it at
this point is mostly for pedantic reasons, and partly to avoid
perpetuating this anachronism by copy and paste to future scripts.
Update to version 1.23
Changelog:
- fix compatibility with Berkeley-DB < 4.1
- fix crash in the database-cleanup routine (Vito Robar)
- updated whitelist
- don't be pedantic about wrong reverse-dns entries: it doesn't really help
and it could affect legitimate mail servers (Andreas Hoedle)
PR: ports/89484
Submitted by: Harold Paulson (maintainer)
Update to 1.17. Minor rc.d script modification to add the --group arg
by default and remove command_interpreter. Require perl >= 5.6.0.
Submitted by: MAINTAINER
