mail/sieve-connect: Sanitize MANPREFIX

Approved by:	portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

mail: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ashish@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam David <adam@FreeBSD.org>
  *  Adam McDougall <mcdouga9@egr.msu.edu>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alex Deiter <tiamat@komi.mts.ru>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alex Perel <veers@disturbed.net>

Remove # $FreeBSD$ from Makefiles.

Update to 0.90
Take maintainership
Fix WWW address

Fix a warning in perl 5.28 which would become fatal in 5.30:

Unescaped left brace in regex is deprecated here (and will be fatal in
Perl 5.30), passed through in regex; marked by <-- HERE in m/^{ <-- HERE
(\d+)\+?}\r?$/ at /usr/local/bin/sieve-connect line 930.

Add DOCS options to ports that should have one.

Also various fixes related to said option.

PR:		230864
Submitted by:	mat
exp-runs by:	antoine

mail/sieve-connect: Update 0.88 -> 0.89

Port changes:
* Use DISTVERSION
* Remove the dead URL from MASTER_SITES
* Add NO_ARCH

Reset maintainership of the ports maintained by alexey@renatasystems.org

Based on the timeout of 3+ months (2018-03-23-now) on bug#226885 for net/ucarp

Also, looking at the subversion log, there were timeouts on:
* bug#224169 r465659 | ygy | 2018-03-26 19:51:12
* bug#224768 r459066 | swills | 2018-01-15 07:16:28
* bug#224755 r459058 | swills | 2018-01-15 06:55:08

The last approval from alexey@renatasystems.org was over a year ago:
bug#218563 r438885 | lifanov | 2017-04-19 08:30:28 (devel/py-colorama)

- Update mail/sieve-connect to 0.88
- Fix LICENSE

Changes in v0.88:

* (BREAKING CHANGE) Require TLS verification to work.

* (POSSIBLY BREAKING CHANGE) Remote sieve name should be basename of local.

* Fail early if no CA trust anchors can be found but TLS verification is
 enabled.

* Added `--tlshostname` option to override the hostname used for
 TLS host identity verification

Rename all three p5-ReadLine-(Gnu,Perl,TTYtter) to their real names
p5-Term-ReadLine-(Gnu,Perl,TTYtter).

I can't find any reason for p5-ReadLine-Gnu to have been added as
ReadLine-Gnu instead of Term-ReadLine-Gnu twenty years ago.

devel/p5-Term-ReadLine-Perl was added as a dupplicate a few years back
where it should not have, so change its maintainer to be perl@ like
devel/p5-ReadLine-Perl had.

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Add Public Domain support to ports license framework. You can now use

    LICENSE=  PD

Note that although Public Domain is not technically a license, it's
handled in the same way as licenses here, which is a common practice
(Arch, Gentoo, Fedora, Debian, even FOSSology do the same).

Convert all ports which redefine Public Domain LICENSE to LICENSE=PD.

Approved by:	portmgr (bapt)
Differential Revision:	D4149

- Add shebangfix to fix runtime errors after recently deleting the perl symlinks
- Bump PORTREVISION

- USES+= tar:bzip2

* Update to 0.87
* STAGE support

Approved by:	wg (mentor)

Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

mail/sieve-connect: update to 0.86

- Update to 0.86

Changes:
http://people.spodhuis.org/phil.pennock/software/sieve-connect.ChangeLog.txt

PR:		ports/180930
Submitted by:	Alexey Degtyarev <alexey renatasystems.org> (maintainer)

- Update to 0.85
- Convert to new options framework

sieve-connect was not actually verifying TLS certificate identities matched
the expected hostname. Changes with new version:

Fix TLS verification; find server by own hostname & SRV.

* TLS hostname verification was not actually happening.

* IO::Socket::SSL requirement bumped to 1.14 (was 0.97).

* By default, if no server specified, before falling back to localhost try to
use the current hostname and SRV records in DNS to figure out if Sieve is
available. Checks for sieve, imaps & imap protocol SRV records and honours

Variable that start with _ are considered private to the defining
makefile and may not be used by ports makefiles.
In addition, avoid problems should the defaults ever change.

Approved by:	portmgr (tabthorpe)

Update to 0.84.
Trim header and cosmetic fix to PLIST_FILES.

PR:		ports/173990
Submitted by:	"Alexey V. Degtyarev" <alexey@renatasystems.org> (maintainer)
Feature safe:	yes

- Update to 0.83

PR:             ports/168312
Submitted by:   Alexey V. Degtyarev <alexey@renatasystems.org> (maintainer)

This is sieve-connect. A client for the ManageSieve protocol, as specifed in
RFC 5804. Historically, this was MANAGESIEVE as implemented by timsieved in
Cyrus IMAP.

This is not yet fully compatible with RFC 5804, but is moving towards that from
the timsieved baseline; some issues to be worked on are documented in the
"TODO" file.

sieve-connect speaks ManageSieve and supports TLS for connection privacy and
also authentication if using client certificates. sieve-connect will use SASL
authentication; SASL integrity layers are not supported, use TLS instead.
GSSAPI-based authentication should generally work, provided that client and
server can use a common underlaying protocol. If it doesn't work for you,
please report the issue.

sieve-connect is designed to be both a tool which can be invoked from scripts
and also a decent interactive client. It should also be a drop-in replacement
for "sieveshell", as supplied with Cyrus IMAP.

WWW: http://people.spodhuis.org/phil.pennock/software/

PR:             ports/157077
Submitted by:   Alexey V. Degtyarev <alexey at renatasystems.org>