ARPACK-NG is a collection of Fortran77 subroutines designed to solve
large-scale eigenvalue problems. It is a fork of the Rice University
ARPACK, and is jointly-maintained by Debian, Octave, and Scilab.
===> The following configuration options are available for arpack-ng-nompi-3.9.1_7:
DOCS=on: Build and/or install documentation
EXAMPLES=on: Build and/or install examples
PYTHON=on: Python bindings or support
====> Options available for the single BLASLIB: you have to select exactly one of them
NETLIB=off: BLAS implementation from Netlib
OPENBLAS=on: OpenBLAS BLAS implementation
===> Use 'make config' to modify these settings
math/arpack-ng: enable Python support by default
- switch to cmake in order to enable Python
(indirectly needed to upgrade Code_Aster)
- optionalize Python and enable it by default
- don’t enable ICB and EIGEN with MPI
- Python implies ICB and deactivate MPI, therefore nompi is the default
- switch to OpenBLAS
- remove ATLAS
PR: 299018
Approved by: yuri (maintainer)
math/arpack-ng: Flavorize on MPI implementation
Positives are that now *-mpich, *-openmpi, *-nompi
packages would be all available.
Negative is that they conflict with each other.
The files need to have the unique suffix.
All flavors are equal, there is no obvious default
among them, so suffixes were added to all of them
to make it clear which implementation is installed.
PR: 293569
Requested by: Steve Kargl <kargl@FreeBSD.org>
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
math: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Alessando Sagratini <ale_sagra@hotmail.com>
* Alex Dupre <ale@FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Amarendra Godbole <amarendra.godbole@gmail.com>
* Anders Nordby <anders@FreeBSD.org>
* Andreas Fehlner (fehlner@gmx.de)
* Andrew L. Neporada <andrew@chg.ru>
* Andrey <gugu@zoo.rambler.ru>
* Andrey Zakhvatov
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.
Suggested by: tijl
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
math/arpack-ng: Update 3.5.0 -> 3.6.3
Port changes:
* Remove the slave port math/arpack-ng-mpich: the MPI option is incremental and
only adds a library
* Permanently enable the MPI functionality: see above
* Shorten the CONFLICTS statement
* Install arpack.h which is forgotten by the project itself
Bump cad/elmerfem: dependency there changed to math/arpack-ng.
math/arpack-ng: Take maintainership
I will update it, and replace all dependencies in other ports from math/arpack
to math/arpack-ng
because math/arpack is dead, and math/arpack-ng is a drop-in replacement and is
maintained and developed.
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
Never set WRKSRC when using USE_GITHUB.
If you want to set WRKSRC, set GH_PROJECT instead.
- The GitHub URLs are case insensitive, but the distribution files you
get out of them are not.
- If the repository was renamed, the old URL will still work, but the
distribution name will be ith the new name.
Sponsored by: Absolight
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.
The first part covered ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.
PR: 214965
Reported by: thierry
- Update to version 3.4.0, now hosted on GitHub [1]
- Add EXAMPLES option [1]
- Fix COMMENT declaration, use ?= so that slave can overide it
- Add LICENSE_FILE
- Convert to options helpers, test framework
- Remove MPI option and move it's all functionality to slave port
This allows removal of setting PKGNAMESUFFIX in master port depending
on options selected which is deprecated. Move LIB_DEPENDS on mpich2
to slave, declare CONFLICTS_INSTALL, MPICH_ARG in such way that can
be overidden by the slave.
PR: 211454 [1]
Submitted by: Iblis Lin [1]
- Add an option MPI to build and install libparpack
- Create a slave port to build a package with this option
- Switch to an external plist, because many files are added.
PR: ports/193810
Submitted by: /me
Approved by: bf (maintainer, by private mail)
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Repair instances, almost all courtesy of bf ;-), of spaces
and/or tabs before the =. This made doing regular expressions
on the ports tree really difficult.
Approved by: portmgr (not really, but touches unstaged ports)
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes". In most cases
USE_GCC=yes has been omitted though.
Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.
Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
Update to libmpc version 1.0.1 which brings the following fixes:
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui
(Only the first 15 lines of the commit message are shown above )
