The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have

- Set CPPFLAGS and LIBS in a number of ports so configure can find libintl.h
  and libintl.so.  This fixes a problem where DATADIRNAME gets an incorrect
  value which causes locale files to be installed in the wrong place.
- The only configure checks that still need to be patched are related
  to intltool so move DATADIRNAME patching from USES=pathfix to
  USE_GNOME=intlhack.

- games/klavaro: remove excessive dependencies
- japanese/libskk: add INSTALL_TARGET=install-strip
- math/libqalculate: add INSTALL_TARGET=install-strip and remove pthread
  patching
- multimedia/freetuxtv: remove excessive dependencies
- science/gramps: fix shared-mime-info use

Exp-run by:	antoine
Approved by:	portmgr (antoine)

Support stage

- Remove manual creation and removal of share/applications, as it's now in the
mtree (categories starting with m)

Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat:
math)

Add an explicit dependency on pkgconf

- Convert USE_GETTEXT to USES (part 1)

Approved by:	portmgr (bapt)

Convert USE_BISON to USES= bison

It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build

it brings bison as a run dependency in case it is set the following way:
USES= bison:run

it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both

While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Sync to new bsd.autotools.mk

Update to 5.32.2.

Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/

This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.

This release features commits by avl, marcus, mezz and myself.

The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:

Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX

The po/zh_CN.po contains a flaw about digits in Simplified Chinese
localization. Even in Chinese digits should be displayed as Arabic numerals but
not in localized forms.

PR:             ports/151143
Submitted by:   "Denise H. G." <darcsis@gmail.com>
With Hat:       gnome@

Presenting GNOME 2.30.2. for FreeBSD.

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Update to 5.28.2.

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Update to 5.26.3.

Reviewed by:    kwm (GNOME team)
Approved by:    tabthorpe (mentor)

Update to 5.26.2.

Update to 5.26.1.

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

Update to 5.24.3.1.

Update to 5.24.3.

Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen

Update to 5.22.3.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Update to 5.22.2.

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Update to 5.22.1

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

Migration from bison 1.x to 2.x

PR:             117086
Tested by:      -exp runs

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

Update to 5.8.25

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,

Add locale stuff in plist that aren't in mtree/BSD.x11-4.dist.

PR:             ports/101495
Submitted by:   Stanislav Sedov <ssedov@mbsd.msk.ru>

Add USE_GETTEXT to appease portlint.

Remove USE_REINPLACE from ports starting with M

Update to 5.7.32.

Update to 5.7.29.

Update to 5.7.28.

Update to 5.7.27.

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Update to 5.7.26.

Update to 5.7.23.

Update to 5.7.18.

Updatr to 5.7.15.

- Update to 5.7.11

Presenting GNOME 2.12 for FreeBSD.  The release is chock full of bug fixes
and new features.  Don't believe me?  Then see for yourself at
http://www.gnome.org/start/2.12/notes/en/.

DO NOT USE portupgrade by itself to upgrade to GNOME 2.12.  Instead, use
the gnome_upgrade.sh script from
http://www.marcuscom.com/downloads/gnome_upgrade212.sh.  This script will
circumvent some potential pitfalls users can see if they use portupgrade
by itself.

In keeping with tradition, GNOME 2.12 for FreeBSD comes with a special
splash screen.  The winner of this release's contest is
Dominique Goncalves <dominique.goncalves@gmail.com>.  His splash screen
was inspired by http://art.gnome.org/contests/2.12-splash/83.

- Remove this forgotten patch, it's not needed anymore.

- Update to 5.5.42

Presenting GNOME 2.10 for FreeBSD!

The release notes can be found at
http://www.gnome.org/start/2.10/notes/rnwhatsnew.html, and will give you a
good idea of what has gone into this release overall.  However, a lot of
FreeBSD specific additions and fixes have been made.  For example, this
release offers fixed ACPI support as well as new CPU freqeuncy monitoring
support.  See the FreeBSD GNOME 2.10 upgrade page at
http://www.FreeBSD.org/gnome/docs/faq210.html for the entire list as well
as a list of known issues and upgrade instructions.

GNOME 2.10, as well as all of our releases, would not be possible without
the great team that goes into porting and testign each and every component.
Thanks definitely goes out to ahze, adamw, bland, kwm, mezz, and pav for all
their work.  We would also like to thank our adventurous users that chose to

Update to 4.4.22 which fixes constant and certain font problems.  See
http://bugzilla.gnome.org/show_bug.cgi?id=163622 for more details.

Use new INSTALLS_OMF.

Approved by:    bland, kwm, marcus and pav

Bump 29 ports that use GCONF_SCHEMAS. Somehow, the diff of GNOME 2.8.x has
lost the small part. The small part was GCONF_SCHEMAS in bsd.gnome.mk that is
taking care of gconf key and schemas files for pkg-plist. Pav has committed by
re-add GCONF_SCHEMAS back in bsd.gnome.mk this afternoon. Therefore, must bump
PORTREVISION to correct our pkg-plist database installed.

Presenting GNOME 2.8 for FreeBSD (2.8.1 to be exact).

This release notes detailing all of the new goodies in GNOME 2.8 can
be found at http://www.gnome.org/start/2.8/notes/, and the list of what
was fixed in GNOME 2.8.1 can be found at
http://lists.gnome.org/archives/gnome-announce-list/2004-October/msg00056.html.

This release, as well as all of our others, would not have been possible
without the great efforts of our FreeBSD GNOME Team.  The list of
current members can be found at http://www.freebsd.org/gnome/contact.html
(including our newest member, Michael Johnson <ahze@FreeBSD.org>).

Special thanks also goes out to all of the loyal FreeBSD GNOME users that
put up with crashes and hangs to test and debug GNOME on FreeBSD.  We would
especially like to thank those users that provided patches for GNOME 2.7 and

Use the new GConf handling policy, this will be required for GNOME 2.7/2.8 or
those ports will not work. Please see the more detail about this:

http://lists.freebsd.org/pipermail/freebsd-gnome/2004-June/007253.html

Also, please check http://www.freebsd.org/gnome/docs/porting.html for the
update about gconf, gconf.pl script and etc.

Approved by:    marcus (portmgr hat)
Reviewed by:    My team, FreeBSD GNOME Team

Backout 4.4.8 version which is actually from GNOME 2.7 series.

Update to 4.4.8

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

Update to 4.3.51.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Update to 4.3.50.

Update to 4.3.48.

Update to 4.3.46.

Update to 4.3.44

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

Update to 4.3.42.

Use intlhack to get this to compile on -STABLE.

Update to 4.3.38

Update to 4.3.37.

Restore part of bland's patch.  Certain locales actually don't have a
thousands separator (e.g. de_DE), and adding a default "," separator
causes strange behavior.  For more information on this ongoing saga, tune
into:

http://bugzilla.gnome.org/show_bug.cgi?id=130282

Update to 4.3.35 which should have bland's thousands separator bug
integrated.

Fix thousands separator handling bug.

Reported by:    Franz Klammer <klammer@webonaut.com>

Bugfix. For locales with non "." radix constants list wasn't properly
initialized.

Update to 4.3.31.

Update to 4.3.29

Update to 4.3.16.

Update to 4.3.15.

Fix buuild on -STABLE, and make sure -lc_r is linked in on -CURRENT.

Reported by:    Sergey Akifyev <asa@gascom.ru>
Approved by:    portmgr (implicitly)

Update to 4.3.3.

Update to 4.3.2.

Update to 4.3.0.

Update to 4.2.103.

Update to 4.2.99.

Remove REINPLACE commands that were rolled into gnomehack.

Update to 4.2.86.

Update to 4.2.83.

Convert to new GNOME infrastructure.

Remove USE_GNOMENG.

Update to 4.2.77.

* Update to 4.2.43
* De-pkg-comment

Chase gtk20's shared lib version.