ised is a command-line tool for generating number sequences and
arithmetic evaluation. Unlike big gui-based software (e.g. Mathematica,
Derive, Matlab, Octave,...) it is intended for use in shell scripting,
together with gnu core utilities.
Its main advantage is that all functions are generalized to operate
on one-dimensional arrays. It can be used for loop indexing (much
like seq), line-by-line arithmetic processing of files, floating
point math for shells that don't support it natively, or interactively,
as extended calculator.
*/*: Drop maintainership for some of my ports
Drop maintainership for ports for which I do not have much interest any
more or for which I do not have as much time as they require, so that I
can focus more on the ports I maintain and other projects both inside
and outside FreeBSD and so that they can be adopted by other
contributors.
*/*: Update WWW to use HTTPS for sourceforge.net projects
Homepage link is permanent redirected to its HTTPS counterpart
Issue reported by repology : https://repology.org/repository/freebsd/problems
Approved by: portmgr (blanket)
PR: 274888
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
Update to libmpc version 1.0.1 which brings the following fixes:
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui
(Only the first 15 lines of the commit message are shown above )
Replace USE_GCC=4.6+ and USE_GCC=4.4+ by USE_GCC=yes.
Right now this is a noop in the former case and a noop in the latter
case unless lang/gcc44 has been installed explicitly.
This puts a bit more emphasis on standardizing on a canonical version
"current" GCC and makes it easier to update that canonical version
by changing the default in Mk/bsd.gcc.mk and updating the lang/gcc port.
That is, USE_GCC=yes means "use a decent/modern version of GCC" without
having to worry about details.
Approved by: portmgr (bdrewery)
Clean up my ports (and a couple of ports@ owned ones):
- Fix COMMENT
- Add MAKE_JOBS_SAFE where appropriate
- Change ordering of LICENSE lines
- Fix new header format
- Etc.
Reviewed by: drogoh (on irc)
ised is a command-line tool for generating number sequences and
arithmetic evaluation. Unlike big gui-based software (e.g. Mathematica,
Derive, Matlab, Octave,...) it is intended for use in shell scripting,
together with gnu core utilities.
Its main advantage is that all functions are generalized to operate
on one-dimensional arrays. It can be used for loop indexing (much
like seq), line-by-line arithmetic processing of files, floating
point math for shells that don't support it natively, or interactively,
as extended calculator.
WWW: http://ised.sourceforge.net
PR: ports/144914
Submitted by: Charlie Kester <corky1951 at comcast.net>
