Developed by Jack Dongarra, Jim Bunch, Cleve Moler and Pete Stewart.
1 Feb 84
Used as part of Matlab, and often used to benchmark machines.
Otherwise it is a very good linear algebra package.
math/linpack: fix installation
Port uses <bsd.lib.mk>, which desires STRIP=${STRIP}, but we have
started to set STRIP=${STRIP_CMD} in MAKE_ENV a while ago.
Override this bogus setting in MAKE_ARGS to fix installation.
MFH: 2026Q2
See also: D55509
math/linpack: fix build on armv7
GNU ld supports neither -z relro nor -z norelro on armv7.
Unfortunately <bsd.lib.mk> insists on adding either to the link.
Work around this issue by using base ld for the link.
MFH: 2025Q2
Mk/bsd.port.mk: Add __MAKE_CONF=${NONEXISTENT} to WRK_ENV
And remove it from individual ports. Use WRK_ENV in custom build
commands where necessary.
FreeBSD make(1) includes /usr/share/mk/sys.mk and that includes
/etc/make.conf if it exists. This happens when you run make in a port
directory but it also happens when the upstream build system uses make.
This commit disables make.conf inclusion in the latter case because
users can define variables like CFLAGS in make.conf that override ports
framework variables and this can cause problems that are difficult to
diagnose.
If there are any build customisations made through make.conf that stop
working because of this commit then they should be made available by the
(Only the first 15 lines of the commit message are shown above )
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Additional builds with with src r354909 applied.
The referenced change made NO_INSTALLLIB, NO_MAN, and NO_PROFILE into
errors causing these ports that declare them and use the FreeBSD make
infrastructure as part of their build to fail.
When the offending variables occur in a BSD Makefile, NO_MAN becomes
MAN= and NO_INSTALLLIB and NO_PROFILE become MK_INSTALLLIB=no and
MK_PROFILE=no respectively. When declared in the environment they
become WITHOUT_<FOO>.
Also GC NO_MANCOMPRESSED which doesn't do anything.
In the case of devel/libpasori, this change accomplished the same thing
as the change in r518434, but more directly (fix the Makefiles rather
than patching them after they are installed).
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.
Suggested by: tijl
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.
The first part covered ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.
PR: 214965
Reported by: thierry
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Repair instances, almost all courtesy of bf ;-), of spaces
and/or tabs before the =. This made doing regular expressions
on the ports tree really difficult.
Approved by: portmgr (not really, but touches unstaged ports)
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes". In most cases
USE_GCC=yes has been omitted though.
Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.
Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
Update to libmpc version 1.0.1 which brings the following fixes:
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui
(Only the first 15 lines of the commit message are shown above )
www.hensa.ac.uk has been replaced by the UK Mirror Service on 1 August 1999.
Move MASTER_SITES that have been dead for 6 years from www.hensa.ac.uk to
the UK Mirror Service, ftp.mirrorservice.org.
Approved By: portmgr (linimon)
Update checksums. Distfiles were rerolled using maximum compression level, but
content of the distfiles is absolutely the same. Therefore don't touch
PORTREVISION.
Remove ftp://ftp.netlib.org/linpack/ from the list of MASTER_SITES. They don't
have the gzip'ed distfiles and they don't support compression on the fly
properly.
