- Remove octave-forge ports no longer supported upstream.

- Bump portrevision for math/octave-forge-* ports because of update of
  math/octave to 4.2.1 (r462865).

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.

The first part covered  ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.

PR:		214965
Reported by:	thierry

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

- Fix trailing whitespace in pkg-descrs, categories [g-n]*

Approved by:	portmgr blanket

- Bump portrevision chasing upgrade of math/octave to 4.0.0.

remove empty pkg-plist

PR:                  201663
Submitted By:        s3erios@gmail.com

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

- Set license_file.

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes".  In most cases
USE_GCC=yes has been omitted though.

Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.

Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...

Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

- Add licence=GPLv2 to many octave-forge ports.

- Implement staging for octave-forge ports.

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui

Add NO_STAGE all over the place in preparation for the staging support (cat:
math)

- Remove .include <bsd.ports.pre.mk>; bsd.ports.post.mk to bsd.ports.mk;
  ${PORTSDIR} to ${.CURDIR}/../.. in the .include for bsd.octave.mk.
  This is because USE_GMAKE no longer works after .include <bsd.ports.pre.mk>.
- Trim headers.
- Clean whitespace.
- Portlint.

- update png to 1.5.10

Bump port revision of all the octave-forge ports,
since there was an API change to octave (from 3.4 to 3.6).
Now it is appropriate to bump the portrevision of every single octave-forge
port,
but a few of the ports needed further patches to make them work: ad,
communications, parallel, odepkg. The es package doesn't build so we switched
off.

Submitted by:   stephen@
Reviewed by:    maho@

- Cosmetic change to Makefile.  Use the variable OCTSRC to describe where the
  contents of the package are stored.  This should make it easier if other
  people take over maintainership of the octave-forge-* ports.

Feature safe:   yes

- Add patch to fix build errors.
- Bump portrevision.

Approved by:    maho (mentor, implicit)

- Bump portrevision for octave-forge-* ports because of update of
  math/octave-forge-base to 1.1, and update of Mk/bsd.octave.mk.

Approved by:    gabor (mentor)

- Bump portrevision because math/octave updated to 3.4.1
- Fix to work with math/octave-3.4.1

Approved by:    maho (mentor)

- BROKEN: does not build under Octave-3.4.0

PR:             ports/156942
Submitted by:   stephen
Approved by:    gabor (mentor)

Maintainer: stephen@missouri.edu -> stephen@FreeBSD.org

Approved by: maho (mentor)

- Get Rid MD5 support

- Update to 1.0.9

PR:             147578
Submitted by:   Stephen Montgomery-Smith <stephen@missouri.edu> (maintainer)

A large number of the octave forge ports need version updates. But the new
release system they have is creating releases that don't quite fit into the
old paradigm. A big difference is that they don't all use configure any more.

This moves all the "GNU_CONFIGURE=yes" stuff from bsd.octave.mk to the
individual ports.

PR:             144512
Submitted by:   Stephen Montgomery-Smith <stephen@missouri.edu> (maintainer)

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update to 1.0.8
- Pet portlint

PR:             ports/134404
Submitted by:   Stephen Montgomery-Smith <stephen AT missouri.edu> (maintainer)
Approved by:    miwi (mentor)

- Update maintainer mail address

PR:             ports/133397
Submitted by:   Stephen Montgomery-Smith <stephen@missouri.edu> (maintainer)
Approved by:    tabthorpe (co-mentor)

Correct port name and create date.

PR:             127226
Submitted by:   Geraud CONTINSOUZAS <geraud@gcu.info> and also
            Stephen Montgomery-Smith <stephen@math.missouri.edu> (maintainer)
Approved by: portmgr@ (erwin)

Add port math/octave-forge-pt_br

This is pt_br.
Brazilian Portuguese translations of the help strings of the
Octave functions.

The octave-forge package is the result of The GNU Octave Repositry project,
which is intended to be a central location for custom scripts, functions and
extensions for GNU Octave. contains the source for all the functions plus
build and install scripts.

PR:             127030
Submitted by:   Stephen Montgomery-Smith <stephen@math.missouri.edu>