| Port details |
- py-lmfit Least-squares Minimization with bounds and constraints
- 1.3.2 math
 =2      1.3.1Version of this port present on the latest quarterly branch. - Maintainer: yuri@FreeBSD.org
- Port Added: 2022-08-10 04:18:36
- Last Update: 2024-08-25 09:04:07
- Commit Hash: 5a82aaa
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- License: BSD3CLAUSE
- WWW:
- https://lmfit.github.io/lmfit-py/
- Description:
- Lmfit provides a high-level interface to non-linear optimization and curve
fitting problems for Python. It builds on and extends many of the optimization
methods of scipy.optimize. Initially inspired by (and named for) extending the
Levenberg-Marquardt method from scipy.optimize.leastsq, lmfit now provides a
number of useful enhancements to optimization and data fitting problems.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}lmfit>0:math/py-lmfit@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/math/py-lmfit/ && make install clean
- To add the package, run one of these commands:
- pkg install math/py-lmfit
- pkg install py311-lmfit
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py311-lmfit listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py311-lmfit
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1724574507
SHA256 (lmfit-1.3.2.tar.gz) = 31beeae1f027c1b8c14dcd7f2e8488a80b75fb389e77fca677549bdc2fe597bb
SIZE (lmfit-1.3.2.tar.gz) = 623945
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py311-setuptools>0 : devel/py-setuptools@py311
- py311-setuptools-scm>0 : devel/py-setuptools-scm@py311
- py311-wheel>0 : devel/py-wheel@py311
- py311-asteval>=1.0 : devel/py-asteval@py311
- py311-dill>=0.3.4 : devel/py-dill@py311
- py311-numpy>=1.16,1<1.27,1 : math/py-numpy@py311
- py311-scipy>=1.6 : science/py-scipy@py311
- py311-uncertainties>=3.1.4 : math/py-uncertainties@py311
- python3.11 : lang/python311
- py311-build>=0 : devel/py-build@py311
- py311-installer>=0 : devel/py-installer@py311
- Test dependencies:
-
- py311-coverage>0 : devel/py-coverage@py311
- py311-flaky>0 : devel/py-flaky@py311
- py311-matplotlib>0 : math/py-matplotlib@py311
- py311-numdifftools>0 : math/py-numdifftools@py311
- py311-pytest-cov>0 : devel/py-pytest-cov@py311
- py311-pytest>=7,1 : devel/py-pytest@py311
- python3.11 : lang/python311
- Runtime dependencies:
-
- py311-asteval>=1.0 : devel/py-asteval@py311
- py311-dill>=0.3.4 : devel/py-dill@py311
- py311-numpy>=1.16,1<1.27,1 : math/py-numpy@py311
- py311-scipy>=1.6 : science/py-scipy@py311
- py311-uncertainties>=3.1.4 : math/py-uncertainties@py311
- python3.11 : lang/python311
- This port is required by:
- for Build
-
Deleted ports which required this port:
- for Run
-
Deleted ports which required this port:
- * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...
Configuration Options:- No options to configure
- Options name:
- math_py-lmfit
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
1.3.2
25 Aug 2024 09:04:07
 |
Yuri Victorovich (yuri) |
math/py-lmfit: update 1.3.1 → 1.3.2
Reported by: portscout |
1.3.1
20 Apr 2024 07:27:31
|
Yuri Victorovich (yuri) |
math/py-lmfit: update 1.3.0 → 1.3.1
Reported by: portscout |
1.3.0
06 Apr 2024 01:33:49
|
Yuri Victorovich (yuri) |
math/py-lmfit: update 1.2.2 → 1.3.0
Reported by: portscout |
1.2.2
29 Feb 2024 07:18:32
|
Charlie Li (vishwin) |
devel/py-setuptools-scm: update to 8.0.4
Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.
Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.
Further details: https://wiki.freebsd.org/Python/setuptools
Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288 |
1.2.2
15 Jul 2023 07:15:25
|
Yuri Victorovich (yuri) |
math/py-lmfit: Update 1.2.1 → 1.2.2
Reported by: portscout |
1.2.1
27 Jun 2023 19:34:34
|
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
1.2.1
21 Jun 2023 07:58:34
|
Yuri Victorovich (yuri) |
math/py-lmfit: Update 1.2.0 → 1.2.1
Reported by: portscout |
1.2.0_2
23 Apr 2023 09:09:58
|
Gerald Pfeifer (gerald) |
*: Bump PORTREVISIONs for math/mpc update to 1.3.1 |
1.2.0_1
09 Apr 2023 17:46:04
|
Yuri Victorovich (yuri) |
math/py-lmfit: Add missing dependency (it is missing in pyproject.toml) |
1.2.0
09 Apr 2023 17:35:27
|
Yuri Victorovich (yuri) |
math/py-lmfit: Update 1.0.3 → 1.2.0
Reported by: portscout |
1.0.3
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
1.0.3
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
1.0.3
10 Aug 2022 04:17:32
|
Yuri Victorovich (yuri) |
math/py-lmfit: New port: Least-squares Minimization with bounds and constraints |
As an Amazon Associate I earn from qualifying purchases.