*/*: bump PORTREVISION after OpenBLAS upgrade

Remark: this souldn’t be necessary, because the version of the library is the
same, but due to many changes between these releases, it is safer this way.

PR:		284314

*/*: bump PORTREVISION after the upgrade to OpenBLAS

*/*: Sunset 12.4-RELEASE/12-STABLE from ports tree

- Remove all references to defunct ARCH arm
- Remove all references to defunct ARCH sparc64
- Remove x11-drivers/xf86-video-sunffb which requires defunct sparc64
  ARCH
- Remove sysutils/afbinit requires defunct sparc64 ARCH
- Remove all references to bktr driver
- Remove all references to defunct FreeBSD_12
- Remove all references to OSVERSION/OSREL corresponding to 12
- Remove conditionals in Mk/Uses/cabal.mk
- Remove sparc reference from Mk/Uses/qt-dist.mk
- Remove BROKEN_sparc64/NOT_FOR_ARCH=sparc64
- Remove BROKEN_FreeBSD_12* from:
- Remove OpenSSL patches from:
- Remove conditional flags for OSVERSION >= 1300000 to fixed flags.
  Also move conditional flags for non sparc64/arm ARCH to fixed flags.

Reviewed by:	brooks, jbeich, rene, salvadore
Differential Revision: https://reviews.freebsd.org/D42068

*/*: bump PORTREVISION after the upgrade of OpenBLAS

PR:		273219

*/*: bump PORTREVISION after the upgrade of MPICH to 4.1.2

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

math/scalapack: upgrade to 2.2.0

Release notes at <https://netlib.org/scalapack/scalapack-2.2.0.html>.

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

math: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Alessando Sagratini <ale_sagra@hotmail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Amarendra Godbole <amarendra.godbole@gmail.com>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Fehlner (fehlner@gmx.de)
  *  Andrew L. Neporada <andrew@chg.ru>
  *  Andrey <gugu@zoo.rambler.ru>
  *  Andrey Zakhvatov

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

Add workaround for Fortran frontend to GCC 10.

PR:		246700

Upgrade to 2.1.0. This now includes BLACS and PBLAS.

Also use openblas by default.

math/scalapack: Fix the OPENMPI option to be always linked to libmpi.so from
openmpi, and not from mpich

Since libmpi.so is installed by both mpich and openmpi many ports suffer from a
problem that even when
they are built to link with openmpi, they still use libmpi.so from mpich when it
is installed.
This makes such ports broken or error prone.

- Fix build with OpenMPI 4 and swap from net/openmpi3 to net/openmpi

- Remove leading article from COMMENT
- Introduce option helpers
- Move OpenMPI support to net/openmpi3. OpenMPI 1 is deprecated

onvert to UCL & cleanup pkg-message (categories l-m)

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.

Suggested by:	tijl

devel/cmake: update to 3.13.3

PR:		234959
Exp-run by:	antoine

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Change 20 ports from net/mpich2 to net/mpich

mpich2 is the obsolete version 2.x, mpich is at the current version 3.x

Ports:
math/scalapack science/nwchem science/quantum-espresso science/qmcpack
science/madness
science/qbox science/openmx science/jdftx science/fleur science/libgridxc
science/mdynamix science/lm science/dftbplus science/py-gpaw devel/ga
math/elpa net/charm science/gromacs math/pari math/arpack-ng-mpich

Add EXAMPLES options to ports that should have one.

Also various fixes related to said option.

PR:		230864
Submitted by:	mat
exp-runs by:	antoine

Add DOCS options to ports that should have one.

Also various fixes related to said option.

PR:		230864
Submitted by:	mat
exp-runs by:	antoine

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

For ports under `cad', `devel', `dns`, and `math' categories: remove
redundant PKGMESSAGE assignment, which is set appropriately by the
b.p.m when `pkg-message' appears on the SUB_FILES list.

- Switch to new test framework

Approved by:	portmgr blanket

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

Update CMake to 3.10.1

 - https://blog.kitware.com/cmake-3-10-1-available-for-download/
   - flang support
   - changes to automoc policies
   - support for FreeBSD package generation with CPack

Necessary fixes to other ports:
 - cad/openvsp make search for libxml explicit
 - math/scalapack force C compiler to be compatible with mpi
 - deskutils/kdepim4 fix incorrect sources list
 - www/qt5-webkit fix incorrect sources list

Thanks to Antoine for the multiple exp-runs.

PR:		223872
Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D13210

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.

The first part covered  ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.

PR:		214965
Reported by:	thierry

devel/pkgconf doesn't search under lib/pkgconfig by default

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

- Fix trailing whitespace in pkg-descrs, categories [g-n]*

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

- Update to 1.10.2

Remove trailing whitespace from Makefiles, M-X.

- Update to 1.10.0
- Add SLURM to OPTIONS_DEFAULT (it's enabled by default in the configure script)

Uses/cmake.mk: Replace CMAKE_ENV with CONFIGURE_ENV.

Instead of defining a variable that is almost always based on CONFIGURE_ENV,
just use CONFIGURE_ENV directly.

This also matches the behavior of other ports that do not use autotools (so
most ports can just worry about CONFIGURE_ENV). Additionally, the fact that
we do not use ?= means we do not have problems if another file in Uses/
needs to set CONFIGURE_ENV (with CMAKE_ENV, the order of the arguments to
USES would matter).

Ports which set CMAKE_ENV have been adjusted accordingly. In most cases,
CMAKE_ENV was just replaced with CONFIGURE_ENV, the exceptions being:
* databases/sqliteman: CMAKE_ENV line removed; setting QMAKESPEC there has
                       no effect on the build system.
* devel/freeocl: CMAKE_ENV line removed; FREEOCL_CXX_COMPILER is already
                 retrieved from the CMAKE_CXX_COMPILER variable in the build
                 system.
* graphics/openimageio: CMAKE_ENV line removed; setting Qt variables there
                        has no effect on the build system.

Reviewed by:		makc
Differential Revision:	https://reviews.freebsd.org/D3403

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

- Update net/openmpi to 1.8.4

Cleanup plist

- Update net/openmpi from 1.8.2 to 1.8.3

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

- Upgrade to 1.5;

- Bump PORTREVISION for consumers.

Chase the upgrade of net/mpich2.

Approved by:	portmgr (non staged ports)

- Update net/openmpi from 1.8.1 to 1.8.2

- Upgrade scalapack to 2.0.2 and stagify

- Bump PORTREVISION for consumers.

Reset maintainership for ports not staged with no pending PR

With hat:	portmgr

Modernize LIB_DEPENDS

With hat:	portmgr

- Convert net/openmpi to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Use BROKEN_sparc64

Approved by:	portmgr (implicit, bump unstaged port)

Convert all :U to :tu and :L to :tl

Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)

bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore

Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier

With hat:	portmgr

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes".  In most cases
USE_GCC=yes has been omitted though.

Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.

Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...

Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui

Add NO_STAGE all over the place in preparation for the staging support (cat:
math)

adjust linking and comments in dependent ports after the math/atlas update;
math/atlas-devel will be updated to use the same constructs at a later date

PR:             162706
Approved by:    miwi (portmgr)
Feature safe:   yes

Chase the upgrade of MPICH2.

Since I'm there, pet portlint where needed, e.g. by removing oblsolete
MD5 checksums.

PR:             ports/154715

- Chase relocation of net/mpich2

- Bump PORTREVISION if needed

- Fix some portlint errors.

- Change sed pattern delimited to something less common in CFLAGS strings

Reported by:    pointyhat

Bump PORTREVISION for everything that sets USE_FORTRAN=yes which now
implies lang/gcc44 up from lang/gcc43.

Approved by:    portmgr

Bump PORTREVISION due to change of USE_FORTRAN=yes to GCC 4.3.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Fix URI.

Update to 1.8.0. Openmpi part is not updated at the moment.

Now we use USE_FORTRAN=yes to use FORTRAN compiler.

Make fetchable by prepareing 1.7.5 version of scalapack_install.ps.
It is replaced to 1.8.0 one.

Spotted by: kris via pointyhat

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

* Update to 1.7.5.
* Install shared libs as well.

Remove CONFLICT line as elmer-mathlibs are deprecated by migration
to gfortran.

* Use gfortran42 only and not gcc42.
* Bump portrevision.

* Migrate to gfortran.
* Bump port revision.
* Use gfortran compiled atlas/blas/lapack.

Update to 1.7.4
- Add support for OpenMPI (requires math/blacs compiled with OpenMPI)
- Make it possible to use math/blas instead of math/atlas

PR:             105497
Submitted by:           trasz <trasz@pin.if.uz.zgora.pl>

remove unnecessary empty files

Submitted by:   thierry

Switch to MPICH2.

PR:             100755, 100756
Submitted by:   thierry

Now blas part can be replaceable.

Now math/atlas* only build shared libs by default,
link against shared libs instead of static libs.

Remove USE_REINPLACE from ports starting with M

Register conflicts with math/elmer-mathlibs.

Submitted by:   thierry and
                Pedro F. Giffuni <giffunip@asme.org>

SHA256ify

Approved by: krion@

(forced commit)
.else if should be .elif or .elseif
->
.else if should be .elif
Submitted by:   joe, kris
->
Submitted by:   marcus, kris

Submitted by:   marcus
Pointy hat to:  myself

.else if should be .elif or .elseif

Submitted by:   joe, kris

Re-organize optimization flags so that runs much more faster

move pkg-message.in to ${FILESDIR} to install
w/o error.

1) fix build after changes to make(1) on FreeBSD >= 5.x.
2) clean up (pkg-message)

PR:             72265
Submitted by:   thierry

Make portlint happy by replacing space to tab

PR:             65409
Submitted by:   trevor

SIZEify

Submitted by:   trevor

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

Add scalapack 1.7, the ScaLAPACK Scalable LAPACK library.

PR:             40521
Submitted by:   NAKATA, Maho <maho@FreeBSD.org>