| Port details |
- cuecat Tools for decoding and using the output of a :Cue:Cat(TM) wand scanner
- 1.1_5 misc
 =0      1.1_5Version of this port present on the latest quarterly branch.  BROKEN: unfetchable
 DEPRECATED: Broken for more than 6 months
 This port expired on: 2016-07-04
 IGNORE: is marked as broken: unfetchable
- There is no maintainer for this port.
- Any concerns regarding this port should be directed to the FreeBSD Ports mailing list via ports@FreeBSD.org
- Port Added: 2001-04-07 16:37:31
- Last Update: 2016-07-04 20:48:24
- SVN Revision: 418057
- Also Listed In: python
- License: not specified in port
- Description:
- The cuecat script repeatedly reads scan codes from a :Cue:Cat scanner
via standard input, decodes and processes the scanned value, then
prompts with Scan! for another scan code. It exists when it reads an
EOF on standard input.
It can be used print a decoded version of the scan code, or launch
commands the barcodes, ISBNs or UPCs scanned in.
cgit ¦ GitHub ¦ GitHub ¦ GitLab ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- No installation instructions:
- This port has been deleted.
- PKGNAME: cuecat
- Flavors: there is no flavor information for this port.
- distinfo:
- There is no distinfo for this port.
No package information for this port in our database- Sometimes this happens. Not all ports have packages. Perhaps there is a build error. Check the fallout link:
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- python2.7 : lang/python27
- Runtime dependencies:
-
- py27-tkinter>0 : x11-toolkits/py-tkinter
- py27-Pmw>0 : x11-toolkits/py-Pmw
- python2.7 : lang/python27
- There are no ports dependent upon this port
Configuration Options:- ===> The following configuration options are available for cuecat-1.1_5:
X11=on: X11 (graphics) support
===> Use 'make config' to modify these settings
- Options name:
- N/A
- USES:
- python shebangfix
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
1.1_5
04 Jul 2016 20:48:24
  |
rene |
Remove expired ports without open PRs:
2016-07-04 security/openpgpsdk: Broken for more than 6 months
2016-07-04 security/radiusniff: Broken for more than 6 months
2016-07-04 security/pear-Auth_OpenID: Broken for more than 6 months
2016-07-04 security/sshit: Broken for more than 6 months
2016-07-04 security/ifd-slb_rf60: Broken for more than 6 months
2016-07-04 security/rainbowcrack: Broken for more than 6 months
2016-07-04 security/vlog: Broken for more than 6 months
2016-07-04 security/cryptstring: Broken for more than 6 months
2016-07-04 x11/libdnd: Broken for more than 6 months
2016-07-04 x11/xlupe: Broken for more than 6 months
2016-07-04 x11/xco: Broken for more than 6 months
2016-07-04 x11/xclick: Broken for more than 6 months
2016-07-04 devel/ocfpcsc: Broken for more than 6 months
2016-07-04 devel/dits: Broken for more than 6 months (Only the first 15 lines of the commit message are shown above  ) |
1.1_5
03 Jun 2016 16:44:58
|
antoine |
Deprecate ports broken for more than 6 months |
1.1_5
01 Apr 2016 14:16:20
|
mat |
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight |
1.1_5
09 Nov 2015 12:59:04
|
antoine |
Mark a few ports BROKEN: unfetchable |
1.1_5
13 Aug 2014 14:09:42
|
jhale |
- Support staging
- WITHOUT_X11 -> X11 option
- Compile python code in do-build target
- USE_PYTHON -> USES=python
- Use USES=shebangfix instead of pre-install sed(1) commands
- Use plist subbing instead of weird post-install hack
- Bump PORTREVISION |
1.1_4
24 Jul 2014 15:36:50
|
bapt |
Reset maintainership for ports not staged with no pending PR
With hat: portmgr |
1.1_4
15 Dec 2013 16:17:47
|
wg |
misc/cuecat: fix python usage
Reported by: exp-run (PR 184591)
Approved by: portmgr (blanket) |
20 Sep 2013 20:50:59
 
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
misc) |
1.1_4
02 Mar 2013 22:32:49
|
lwhsu |
- Update *_DEPENDS on x11-toolkits/py-tkinter after _tkinter.so relocation |
1.1_3
12 Feb 2012 16:53:36
|
rm |
- convert to using PYTHON_SITELIBDIR (non-functional change) |
1.1_3
19 Mar 2011 12:38:54
|
miwi |
- Get Rid MD5 support |
1.1_3
05 Feb 2010 11:46:55
|
dinoex |
- update to jpeg-8 |
1.1_2
02 Sep 2007 07:16:05
|
rafan |
- Chase x11-toolkits/pmw renamed to x11-toolkits/py-Pmw
PR: 115302 |
1.1_1
19 May 2007 20:32:57
|
flz |
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}. |
1.1
22 Jan 2006 12:59:47
|
edwin |
SHA256ify
Approved by: krion@ |
1.1
22 Jan 2006 02:28:45
|
edwin |
Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry
Approved by: krion@
PR: ports/88711 (related) |
1.1
16 Oct 2005 02:50:46
|
ahze |
- Add missing "11" to fix plist on users who define WITHOUT_X11 |
1.1
15 Jul 2005 05:06:04
|
novel |
Fix MASTER_SITES.
PR: 83486
Submitted by: Mike Meyer (maintainer) |
1.1
13 Apr 2004 18:55:41
|
linimon |
Per distfile survey, chase reorganized mastersite. Informed maintainer. |
1.1
31 Mar 2004 03:12:58
|
trevor |
SIZEify (maintainer timeout) |
1.1
21 Feb 2003 12:48:19
|
knu |
De-pkg-comment. |
17 Jun 2001 16:12:13
    |
kevlo |
Update to version 1.1 |
29 Apr 2001 09:23:30
|
roam |
The dist tarball was rerolled with new functionality: proper handling of zero
checksums. Update the tarball MD5 sum and bump PORTREVISION. |
15 Apr 2001 02:00:11
|
steve |
Note extra files and remove extra directories on uninstall. |
07 Apr 2001 20:37:31
|
will |
Add cuecat 1.0, tools for decoding and using the output of a :Cue:Cat(TM) wand
scanner. |
As an Amazon Associate I earn from qualifying purchases.