Qt4 deprecation: Remove Qt4 and its consumes.

2019-03-15 accessibility/qt4-accessible: Qt4 has been EOL since december 2015
2019-03-15 astro/qlandkartegt: Qt4 has been EOL since december 2015
2019-03-15 astro/stellarium-qt4: Qt4 has been EOL since december 2015
2019-03-15 astro/xglobe: Qt4 has been EOL since december 2015
2019-03-15 audio/acoustid-fingerprinter: Qt4 has been EOL since december 2015
2019-03-15 audio/cueplayer: Qt4 has been EOL since december 2015
2019-03-15 audio/esperanza: Qt4 has been EOL since december 2015
2019-03-15 audio/lastfm-desktop: Qt4 has been EOL since december 2015
2019-03-15 audio/minitunes: Qt4 has been EOL since december 2015
2019-03-15 audio/mixxx20: Qt4 has been EOL since december 2015
2019-03-15 audio/mumble: Qt4 has been EOL since december 2015
2019-03-15 audio/murmur: Qt4 has been EOL since december 2015
2019-03-15 audio/puddletag: Qt4 has been EOL since december 2015

Mark QT4 ports/functionality for removal on 2019-03-15

While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.

Submitted by:	tcberner
Reviewed by:	adridg, jhale, rene, tcberner
Approved by:	portmgr (implicit, flavor hook)
Differential Revision:	https://reviews.freebsd.org/D17741

pyqt: Change install directories for Python flavor support

* PyQt could not be installed for multiple Python versions at
  the same time, as there were conflicting files.

  This patch creates Python-version versioned directories for
  all these, and further installs binaries with a version number.

* Note, there might be some hickups for software that depends on
  on of the .so's provided by PyQt5, which might not be found
  anymore autmotically, and maybe need some LD-flaggery.

* Update PyQt5 to 5.10.1

* Mark www/py-qt5-webengine broken. It is unforuntately no longer
  compatible with the old qt5-webengine-5.9.4 we ship.

PR:		232745
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D8714

Update the QScintilla2 ports to 2.10.4

- Update WWWs for all py-qt4* and py-qt5* ports
- Fix plists for py-qt5* for python3 case, adding missing .pyi files

Approved by:	portmgr blanket

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

- py-qt5-*: Fix build when using non default version of python, in this case
  sip is installed as sip-${PYTHON_VER}

- py-qt*-demo: Fix packaging with python3, those ports have a python2 pkg-plist
  so USE_PYTHON=py3kplist must be used to convert it

PR:		219641

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

When there is a do-install target, do not use a post-install target, do
everything at once.  Sometime, rename post-install into a options helper
target.

I did not fix ports that were such a mess that I could not figure out
what they really wanted to do.  I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.

With hat:	portmgr
Sponsored by:	Absolight

devel/py-qt4-core cleanups in py-qt4-*

- Cleanup work on the py-qt4 ports, leading to a reduced runtime footprint.

PR:		209283
Submitted by:	groot@kde.org (kde), rakuco

Properly all compileall.py.

Do it like we already do in devel/py-qt4-core: call compileall.py with -d so
that the .pyc and .pyo files do not have ${STAGEDIR} in them.

While at it, also call python with -O to generate .pyo files.

Update PyQt4 to 4.11.4, SIP to 4.17 and QScintilla2 to 2.9.1.

Bring in some long overdue updates, some of which are required for us to
later land the PyQt5 ports.

One big change with this update is that the PyQt4 ports now install their
.sip files into share/py-sip/PyQt4 instead of share/py-sip. This way we do
not end up with directories like share/py-sip/QtCore, which are especially
confusing once PyQt5 lands and starts installing files with the same names.

Other noteworthy items:
- PORTREVISION has been bumped on ports depending on devel/qscintilla2
  because libqscintilla2.so's SOVERSION has changed.
- graphics/seexpr has been converted to USE_PYQT, as the file it used to
  define a build-time dependency on x11-toolkits/py-qt4-gui has moved.

Once again, big thanks to Tobias Berner <tcberner@gmail.com> and Guido Falsi
(madpilot@) for their initial work on these ports as part of the effort to
land PyQt5 into the tree (see D2910 in Phabricator for an earlier version of
the PyQt5 patch set).

PR:		205143

PyQt: Replace bsd.pyqt.mk with Uses/pyqt.mk.

In preparation for landing PyQt5 ports, generalize devel/py-qt4's
bsd.pyqt.mk and make it a proper file in Uses/.

Ports wishing to depend on PyQt4 ports can now do the following:
  USES=		pyqt:4
  USE_PYQT=	foo bar_build baz_run

Other changes include the renaming of the PYQT4_DIST variable to PYQT_DIST
and the introduction of the PYQT_SIPDIR plist substitution variable. The
rest of the contents of Uses/pyqt.mk are pretty much identical to what we
had in bsd.pyqt.mk with additional processing of USE_PYQT.

Even though this patch touches files in many different ports, the goal is

py-qt4-demo: Fix runtime dependency list.

r344123 broke it by replacing RUN_DEPENDS with PYQT4_RUN_DEPENDS. The latter
has no meaning, so the port stopped depending on all other PyQt4 ports.

MFH:		2015Q4

Update PyQt and its dependencies.

* PyQt4 has been updated to 4.11.3.
* QScintilla has been updated to 2.8.4.
* SIP has been updated to 4.16.5.

This update is much smaller than the previous one, as there has been no
further need for clean ups in the ports infrastructure.

Pretty much the entire patch set has been originally contributed by Tobias
Berner, who sent it to the KDE on FreeBSD mailing list. Thanks a lot!

PR:		198016
Submitted by:	Tobias Berner <tcberner@gmail.com>

Cleanup plist

Replace USE_PYTHON* by USES=python.

This commit consists of area51's r10314 and r10356 patchsets.

Approved by:	rakuco (mentor)

Update PyQt to 4.11.1, QScintilla to 2.8.3 and SIP to 4.16.2.

... And bump PORTREVISION on ports that depend on devel/qscintilla2 due to
the shlib version change.

This is brought to you by the KDE on FreeBSD team. Besides updating to newer
upstream releases, this commit also contains a lot of under-the-hood changes
to the PyQt/QScintilla/SIP ports. Their Makefiles had accumulated a lot of
cruft over time, so it was time for some summer cleaning:

- General, belated changes:
  * Use OPTIONS helpers wherever possible, stop including
    <bsd.port.options.mk> when not necessary, stop checking for
    ${PORT_OPTIONS:MDOCS} and ${PORT_OPTIONS:MEXAMPLES} when not necessary,
    add options such as DOCS and/or DEBUG where they were only checked for.

misc/py-qt4-demo:
- Use plist instead of PORTEXAMPLES, otherwise the package is bogus when
  NOPORTEXAMPLES is set
- Use compileall.py to byte-compile installed examples
- Use options helpers

Update SIP to 4.15.2 and PyQt to 4.10.3.

This commit also adds proper staging support to all the ports being updated.

In collaboration with Schaich Alonso <alonsoschaich@fastmail.fm> and
Tomasz Kowalczyk <kowalczfbsd@gmail.com>.

Add NO_STAGE all over the place in preparation for the staging support (cat:
misc)

Update the PyQt ports.

- SIP has been upgraded to 4.14.7.
- PyQt4 has been upgraded to 4.10.2.
- QScintilla2 has been upgraded to 2.7.2.

KDE/FreeBSD team presents:
 SIP 4.14.3
 QScintilla 2.7
 PyQt 4.9.6

The area51 repository features commits by jhale and myself.

Changes:
- Trim Makefile header
- Convert to new option framework

KDE/FreeBSD team presents update for PyQt ports:
 - sip to 4.13.2
 - PyQt4 to 4.9.1
 - QScintilla to 2.6.1

- Pet Tinderbox and friends.

OPTIONSFILE must be set using ?= to allow overriding.

PR:             163743
PR:             163744
PR:             163745
PR:             163746
Submitted by:   A.J. Kehoe IV (Nanoman) <vOo4vyPj@nanoman.ca>

- Update PyQt4 to 4.8.5.
- Update SIP to 4.12.4.
- Use common DISTINFO_FILEs.

- Update SIP to 4.12.1.
- Update PyQt4 to 4.8.3.
- Update QScintilla2 to 2.4.6.

KDE FreeBSD team is glad to present Qt 4.7.1 in ports.

Along with Qt4 the following ports are updated:

PyQt4 ports to 4.8.1
devel/py-sip to 4.11.2
devel/qscintilla2 to 2.4.5
PyKDE3 to 3.16.7
PyQt3 tp 3.18.2-snapshot-20091119

New ports added:
devel/qt4-declarative
devel/py-qt4-declarative
x11/qt4-graphicssystems-opengl

This release has been contributed by:
Thomas Abthorpe (tabthorpe)
Max Brazhnikov (makc)
Dima Panov (fluffy)
Alberto Villa (avilla)

We'd like to thank Martin Wilke (miwi) for exp-run.

- The FreeBSD KDE team is pleased to announce SIP-4.10.2, PyQt-4.7.3
        and QScintilla-2.4.3 for FreeBSD.

With hat on:    kde@

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

The KDE FreeBSD team is proud to announce the release of SIP-4.10 and
PyQt-4.7 for FreeBSD. The official update notes can be found at
http://www.riverbankcomputing.com

We'd like to say thanks to all helpers, testers and submitters.

- Add missing patch

Approved by:    tabthorpe (mentor,implicit)

- Update py-qt4* to 4.6.2
- Update py-sip to 4.9.3

The KDE FreeBSD team would like to say thanks to all the helpers
and submitters.

Tested by:      pointyhat-exp-run (myself)

- Update py-qt4 to py-qt4.5.4
- Update qscintilla-2* to 2.4
- Update py-sip to 4.8.2
- Update py-kde to 1.16.3
- Update py-qt to 1.18.1

The KDE FreeBSD team would like to say thanks to all the helpers
and submitters

New Port:
devel/py-qt4-scripttools

Update PyQt4 ports to 4.4.4, new ports:
devel/py-qt4-help
multimedia/py-qt4-phonon
textproc/py-qt4-xmlpatterns
www/py-qt4-webkit

Update QScintilla2 to 2.3.2, PyQt3 to 3.17.6, PyKDE3 to 3.16.2.

Pass maintainership to kde@FreeBSD.org. Thanks Danny Ricin for his great work.

PR:             based on ports/130219
Submitted by:   Dima Panov" <fluffy at fluffy.khv.ru>

The first iteration of the py-qt4-* ports had a snapshot date as its
PORTVERSION. After that the PORTVERSION became 4.foo. Because this is
numerically lower than before, the PORTEPOCH should have been bumped.

Poked by:       kris@

PR:             125814
Submitted by:   Danny Pansters <danny@ricin.com> (maintainer)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 4.3.3
- Configure.py now has a flag to specify component, patch is now simpler
- Update qscintilla2 so version where used
- Use bsd.pyqt.mk

Submitted by:   Danny Pansters <danny@ricin.com> (maintainer via private mail)

- Update to 4.3.1

Submitted by:   Danny Pansters <danny@ricin.com> (maintainer)

- Update to PyQt-4.3

Submitted by:   Danny Pansters <danny@ricin.com> (maintainer via privat mail)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 4.2

Submitted by:   Danny Pansters <danny@ricin.com> (maintainer via privat mail)

PyQt4 is a set of Python bindings for Trolltech's Qt4 application framework.
This package provides the PyQt4 demo and examples.

WWW: http://www.riverbankcomputing.co.uk/pyqt/

PR:             ports/109634
Submitted by:   Danny Pansters <danny at ricin.com>