2017-04-30 devel/stormlib-ghost++: Unfetchable for more than six months (google
code has gone away)
2017-04-30 devel/py-coil: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/py-cmdln: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/privman: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/c-unit: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/py-px: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/nglogc: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/bncsutil-ghost++: Unfetchable for more than six months (google
code has gone away)
2017-04-30 devel/liblouisxml: Unfetchable for more than six months (google code
has gone away)
2017-04-30 devel/nxt-python: Unfetchable for more than six months (google code
has gone away)
2017-04-30 devel/spdict: Unfetchable for more than six months (google code has
gone away)
2017-04-30 devel/guiloader-c++: Unfetchable for more than six months (google
code has gone away)
2017-04-30 devel/streamhtmlparser: Unfetchable for more than six months (google
code has gone away)
2017-04-30 devel/winpdb: Unfetchable for more than six months (google code has
gone away)
2017-04-30 net/opendpi: Unfetchable for more than six months (google code has
gone away)

Chase ffmpeg 3.3 update (ABI changes)

PR:		218658
Submitted by:	riggs

Mark the remaining ports depending on Google Code as DEPRECATED, with an
EXPIRATION_DATE at the end of April 2017.

In the past six months, about a third of the ports marked BROKEN because
they were hosted on Google Code have been fixed.  The remaining must not
be of use to anyone.

With hat:	portmgr
Sponsored by:	Absolight

GOOGLE_CODE has gone away.

- If a port has another upstream, remove GOOGLE_CODE
- If a port only has GOOGLE_CODE mark it BROKEN

Some ports have a local mirror configured but for security reasons, it
is not considered upstream.

Sponsored by:	Absolight

multimedia/freetuxtv: revbump required after previous changes

- Convert to USES=localbase sqlite
- Add LICENSE_FILE
- Register proxy dependencies found by stage-qa
- Fix absolute path link
- Use options helper for DOCS installation
- Regenerate patch with make makepatch

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

- Fix build WITHOUT=NLS

Part 1 of adding USE_GNOME=intltool to ports that require it.

The reason for this is that in the GNOME 3.16 update, USE_GNOME gtk20 and
gtk30 don't pull intltool in anymore.

PR:		201980
Exp-run by:	antoine@

Upgrade to 0.6.6 .

Changelog at <http://freetuxtv.blogspot.fr/2014/01/freetuxtv-version-066.html>.

- Set CPPFLAGS and LIBS in a number of ports so configure can find libintl.h
  and libintl.so.  This fixes a problem where DATADIRNAME gets an incorrect
  value which causes locale files to be installed in the wrong place.
- The only configure checks that still need to be patched are related
  to intltool so move DATADIRNAME patching from USES=pathfix to
  USE_GNOME=intlhack.

- games/klavaro: remove excessive dependencies
- japanese/libskk: add INSTALL_TARGET=install-strip
- math/libqalculate: add INSTALL_TARGET=install-strip and remove pthread
  patching
- multimedia/freetuxtv: remove excessive dependencies
- science/gramps: fix shared-mime-info use

Exp-run by:	antoine
Approved by:	portmgr (antoine)

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

- Switch to USES=libtool, drop .la files

- Chase database/sqlite3 slib bump

Approved by:	portmgr (myself)

Convert vlc to USES=libtool
Because vlc uses a dynamic plist that dynamic plist should be created after the
removal of the .la files hence move this target into add-plist-data (this is a
dirty workaround) and one more reason why dynamic plist are evil
libvlc.so.X number has changed (hidden by dynamic plist, told you this is evil)
bump all consumers of libvlc.so

These ports are no longer used or cared for.

comms/spandsp-devel

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Strip library
- Fix typo

deskutils/kupfer

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Change install, cosmetical changes

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

- Remove dependency glib20 pulled in by other deps (gtk20)
- Break lines around 80 characters
- Add pkg-message
- Set PORTSCOUT, Upstream use GTK3 in newer Versions
- Add REINPLACE, fix bad GTK code

Switch FreeBSD CURRENT to use the new xorg stack (WITH_NEW_XORG=) [0]
If the old xorg stack is still needed, it is possible to add WITHOUT_NEW_XORG=
to /etc/make.conf to get the old version.

Update several xorg related ports, including:
x11/libxcb 1.9.1 -> 1.9.3
graphics/libdrm 2.4.46 -> 2.4.50
x11/pixman 0.30.2 -> 0.32.4
x11/xkeyboard-config 2.9 -> 2.10.1
x11-drivers/xf86-input-keyboard 1.7.0 -> 1.8.0

Fix dissapearing cursor in xf86-video-vmware [2]

Stagify all x11@-owned ports

Bump portrevisions for xf86-* ports due to xserver version change.

Fix fallout from updates where needed.

Thanks to:	all testersi, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/184684 [1], ports/181385 [2]
Submitted by:	Douglas Carmichael <dcarmich@dcarmichael.net> [2]
Approved by:	portmgr (bdrewery), core (jhb) [0]

- Bump PORTREVISION to trigger fix in r334478

Reported by:	Juergen Lock <nox@jelal.kn-bremen.de>
Approved by:	pawel / wg (mentors, implicit)

- Unbreak after vlc update

PR:		ports/183854
Submitted by:	Juergen Lock <nox@jelal.kn-bremen.de>
Approved by:	pawel / wg (mentors, implicit)

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui

- Remove manual creation and removal of share/applications, as it's now in the
mtree (categories starting with m)

Approved by:	portmgr (bdrewery)

- Change maintainer email to @FreeBSD.org
- Use the new format for LIB_DEPENDS
- USE_GNOME cairo instead of graphics/cairo
- Simplify Option NLS handling
- Support STAGEDIR

Approved by:	pawel / wg (mentors, implicit)

The FreeBSD graphics/x11 team proudly presents
a kwm, zeising production:

MESA 9.1.6

Starring:
Mesa 9.1.6, including libGL, libGLU and dri (new xorg only)
Addition of libEGL and libglesv2
KMS support for ATI graphics cards in 10-current (new xorg only)
Improved sparc64 support for new xorg. [1]
pixman 0.30.2, including shlib bump and portrevision bumps
libX11 1.6.2
Make absolute pointing devices work with x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati 7.2.0 for 10-current (KMS aware ati driver)

Add NO_STAGE all over the place in preparation for the staging support (cat:
multimedia)

- Update to 7.31.0
- Bump PORTREVISION for ftp/curl shlib change
- Add TEST_DEPENDS
- Convert to new options framework
- Adjust options:
  - Add COOKIES
  - Add CYASSL, NSS, POLARSSL, THREADED_RESOLVER, TLS_SRP [1]
  - Add GSSAPI and SPNEGO [2]
  - Remove KERBEROS4
  - Rename LIBIDN to IDN
  - Remove TRACKMEMORY [1]
- Sort option handler
- Add SLAVEDIRS: ftp/curl-hiphop
- Cosmetic change
- Cleanup Makefile header
- While I'm here, fix typo (PORTREVSION) in x11-wm/ede/Makefile

Changes:	http://curl.haxx.se/changes.html
PR:		ports/172325 (-exp run), ports/177369 (based on) [1]
Submitted by:	Hirohisa Yamaguchi <umq@ueo.co.jp> [1], hrs (via email) [2]
Exp run by:	miwi

multimedia/freetuxtv: fix build

- Add p5-XML-Parser as BUILD_DEPENDS [1]
- Use pathfix [1]
- Add DOCS and NLS options [1]
- Fix build with clang, -Wno-return-type

PR:		ports/179950
Submitted by:	nemysis <nemysis@gmx.ch> [1] (maintainer)

The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:

Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

Chase textproc/libebml, multimedia/libmatroska update.

Approved by:    multimedia (bapt, kwm)

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

Finish converting the whole ports tree to USES=pkgconfig

Update PCRE to 8.32
Introduces the UTF-32 library pcre32
Bump PORTREVISION in dependent ports

- Fix typo

Approved by:	nemysis <nemysis at gmx.ch> (maintainer)

Options framework take care of NLS, no need do specify it

Reported by:    bapt

FreetuxTV is a WebTV player working on the Linux platform based on GTK2+
and LibVLC.

The goal of this project is to create a WebTV player.
It can be used by french people to watch ADSL TV on the PC with ISPs or by
other people to watch WebTV and Web Radio in many languages. The GUI is
developed in GTK2+ and is using the VLC engine to display the channels.

Features :
 - Play TV (Free, SFR and WebTV)
 - Play in full screen mode
 - Play in miniature Mode
 - Support for multimedia keys
 - Add new groups of channels from M3U playlists

WWW: https://code.google.com/p/freetuxtv/wiki/HomePage?wl=en

PR:		ports/171881
Submitted by:	nemysis <nemysis@gmx.ch>