Quod Libet is a music management program. It provides several different
ways to view your audio library, as well as support for Internet radio
and audio feeds. It has extremely flexible metadata tag editing and
searching capabilities.
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py312-quodlibet listed in the above command, you can pick from the names under the Packages section.
===> The following configuration options are available for py312-quodlibet-4.7.1:
PULSEAUDIO=off: Support PulseAudio
===> Use 'make config' to modify these settings
multimedia/quodlibet: remove dependency and add a pkg-message
Remove dependency to deskutils/notification-daemon and
add a pkg-message for additional ports to enable plugins
PR: 296564
Reported by: David Gilbert <dave@daveg.ca>, pi
Approved by: maintainer (aly@aaronly.me)
graphics/py-pycairo: rename and update to 1.29.0
Changelog: https://pycairo.readthedocs.io/en/latest/changelog.html#v1-29-0
Notably, experimental support for free-threaded Python (3.13t, soon 3.14t)
Port and PKGNAME renamed to match Python package metadata, and to
properly build with USE_PYTHON=pep517. Test suite also now exposed.
Remove PORTSCOUT since this does not follow the even-odd version
split.
python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal
Any missed ports, feel free to bump.
Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
accessibility/at-spi2-core: update to 2.46.0
What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
interface.
What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).
What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.
(Only the first 15 lines of the commit message are shown above )
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
framework: convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert ports tree to make use of USES=gstreamer
- remove duplicate dependency lines from the tree
Differential Revision: https://reviews.freebsd.org/D35097
multimedia/quodlibet re-add with latest version 4.3.0
Repo-copied from @548979.
PR was filed just the day after the port was deleted. The new version works fine
with modern versions of Python. Builds in {11.4,12.1}[amd64,i386] and 13-current
amd64. Run tested fine in 12.1 amd64.
Submitter claims maintainership (already maintaininer for multimedia/playerctl).
ChangeLog:
https://quodlibet.readthedocs.io/en/latest/changelog.html#release-4-3-0
PR: 249483
Submitted by: aly@aaronly.me (maintainer)
Remove expired ports:
2020-09-15 audio/abraca: Uses deprecated version of python
2020-09-15 audio/ardour5: Uses deprecated version of python
2020-09-15 audio/cplay: Uses deprecated version of python
2020-09-15 audio/cpp-xmms2: Uses deprecated version of python
2020-09-15 audio/p5-xmms2: Uses deprecated version of python
2020-09-15 biology/haplohseq: Uses deprecated version of python
2020-09-15 biology/tophat: Uses deprecated version of python
2020-09-15 chinese/ibus-array: Uses deprecated version of python
2020-09-15 comms/congruity: Uses deprecated version of python
2020-09-15 comms/libbtbb: Uses deprecated version of python
2020-09-15 comms/quisk: Uses deprecated version of python
2020-09-15 databases/mtools-mongodb: Uses deprecated version of python
2020-09-15 databases/mydbf2mysql: Uses deprecated version of python
(Only the first 15 lines of the commit message are shown above )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above )
Update GStreamer1 ports to 1.12.2.
Rework the adding of dependancies in Mk/bsd.gstreamer.mk.
Previous when using USE_GSTREAMER[1] it would just add the request modules to
BUILD/RUN_DEPENDS. This caused the qa script to complain because the old code
didn't implicit depend on the gstreamer1 and gstreamer1-plugins[-bad] ports for
the libraries they carried, even if they where present via the plugins! The new
code adds implicit depends on these ports so USE_GSTREAMER[1] using ports have
all the libraries included.
* The mad mp3 plugin was removed, mpg123 plugin also provides mp3 decoding.
Switch over ports that used the gstreamer1 mad plugin.
* gtksink plugin renamed -> gtk
* Hook up the sndio plugin into the framework
* Add some indirect dependacies where needed
* Reorder the plugin list in bsd.gstreamer.mk so only one plugin per line. When
changing plugins it doesn't result in multiple lines being changed.
* Remove mentions in bsd.gstreamer.mk of plugins mentions that where removed.
* Depend on libunwind on i386/amd64, GStreamer links to it if it is present.
PR: 220753
Exp-run by: antoine@
multimedia/quodlibet: Update to 3.6.2
- Move to gtk3 and gstreamer-1.0 [1]
- Add dependencies on musicbrainzngs, notification-daemon, libsoup,
libwebkit2gtk-4.0, pygobject3 [1]
- Remove gconf, python, musepack from USE_GSTREAMER (not in gstreamer 1.0)
- Change name of gstreamer mp3 plugin from mp3 to mad (per gstreamer 1.0 ports)
- Add LICENSE_FILE, and general port tidy-up
- Update WWW link to new project site
- Remove pkg-message regarding adding new plugins, as they are now bundled [1]
[1] https://quodlibet.readthedocs.org/en/latest/packaging.html
Changes this release:
https://quodlibet.readthedocs.org/en/latest/changelog.html
PR: 208988
Reviewed by: mat (mentor)
Approved by: johnson.peter@gmail.com (maintainer timeout), adamw (mentor)
Differential Revision: https://reviews.freebsd.org/D6604
Part 1 of adding USE_GNOME=intltool to ports that require it.
The reason for this is that in the GNOME 3.16 update, USE_GNOME gtk20 and
gtk30 don't pull intltool in anymore.
PR: 201980
Exp-run by: antoine@
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used.
(Only the first 15 lines of the commit message are shown above )
- Switch audio/musepack to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed
- Fix audio/abcde by requiring python
- Fix audio/moc plist with MUSEPACK enabled
Approved by: portmgr blanket
Remove indefinite articles and trailing periods from COMMENT, plus minor
COMMENT typos and surrounding whitespace fixes. A few Makefiles where not
included as they contain Latin-1 characters that break the Phabricator
workflow. Category M.
CR: D306
Approved by: portmgr (bapt)
Un-break install, but while on it
- Update port to upstream release 2.6.3
- Use correct download URL (move from Google code to bitbucket)
- Add LICENSE
- USE_* -> USES
- Generate plist via pydistutils
- Use SPC option on i386 only, it's not supported elsewhere
- Stagify
- Change URLs in pkg-message (pointing to bitbucket), simplify
Special thanks to Carlos (submitter) for reviewing, and to
Christoph Reiter (Quodlibet project) for fixing the '--record'
option for Quodlibet with pydistutils.
PR: ports/187263
Submitted by: Carlos Jacobo Puga Medina <cjpugmed@gmail.com>
Reviewed by: submitter
Approved by: thierry (mentor), maintainer timeout
MFH: 2014Q2
- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
- Add a site to MASTER_SITES
- Fix OPTIONS to match test [1]
PR: ports/108535ports/108531 [1]
Submitted by: ahze [1]
Peter Johnson <johnson.peter@gmail.com> (maintainer)
Approved by: maintainer [1]
- Add the gstreamer-plugins-good dependency to make ID3 tags to be playable,
bump the PORTREVISION.
- Remove USE_GSTREAMER=yes, taken care by USE_GSTREAMER=foobar
- Move from (BUILD|RUN)_DEPENDS=[...]py-gstreamer to USE_GSTREAMER=python
- Move from (BUILD|RUN)_DEPENDS=[...]py-gnome-extras to USE_GNOME+=pygnomeextras
PR: ports/107256
Submitted by: Peter Johnson <johnson.peter@gmail.com> (maintainer)
- Update to 0.24
- Add dbus support option
- Remove patches merged into upstream
PR: ports/105897
Submitted by: Peter Johnson <johnson.peter at gmail.com> (maintainer)
- update to 0.23.1
- transfer maintainership to submitter
PR: 102631
Submitted by: Peter Johnson <johnson.peter@gmail.com>
Approved by: novel (mentor), maintainer timeout (3 weeks)
- Update gstreamer to 0.10
- Move all old gstreamer 0.8 ports to gstreamer*80 [1]
- Chase all ports with new gstreamer or gstreaemer moves
Repocopied by: marcus [1]
