20:29 rafan 

- What am I thinking, it is already in net/scamper.

20:25 rafan 

Add scamper 20060331, dual-stack traceroute software.

PR:             ports/100438
Submitted by:   Janos Mohacsi <janos.mohacsi at bsd.hu>

00:11 shaun 

Add net-mgmt/netdisco - a powerful web-based tool for managing and
mapping moderate to large sized networks.

PR:             ports/95563
Submitted by:   shaun (me)
Approved by:    ahze (mentor, implicit)

19:26 itetcu 

IPAcco is a free software package that helps a network admin
to collect, visualize and analyze IP accounting data from the
Cisco routers.
Cisco routers themselves are capable of collecting IP accounting
information . i.e. an unordered set of IP source-destination
pairs along with a byte and packet counters corresponding to all
network traffic flows that passed through the router's interfaces.
These data can be a useful source for various analysis procedures
and billing systems but by itself, in their raw form they are
rather difficult to read and understand. In addition, a router
cannot keep a lot of data . its memory is needed for purposes
other than remembering what traffic, from what sources and where
it forwarded two month ago.

WWW:    http://ipacco.sourceforge.net/

- Babak Farrokhi
babak@farrokhi.net

PR:             ports/99451
Submitted by:   Babak Farrokhi <babak@farrokhi.net>

02:09 clsung 

Add p5-NetAddr-IP-Lite 0.09, IPv4/6 and 128 bit number utilities.

PR:             ports/97938
Submitted by:   Yuan-Chung Hsiao <ychsiao@ychsiao.org>

07:31 clsung 

Add aircrack-ng 0.5, aircrack-ng is the next generation of aircrack.

PR:             ports/97922
Submitted by:   Lars Engels <lars.engels@0x20.net>

19:45 sat 

Add py-twistedSNMP: Twisted Python framework for doing SNMP stuff

PR:             ports/97051
Submitted by:   kitsune <v.velox@vvelox.net>
Approved by:    krion (mentor)

12:11 pav 

nagiosgraph is an application to collect performance data from nagios
plugins, insert the data into rrdtool database, and generate webpages
with rrdtool graphs of the performance data. nagiosgraph is easy to
configure, and ready to use for many nagios plugins.

WWW: http://nagiosgraph.sourceforge.net/

PR:             ports/96769
Submitted by:   Denis Shaposhnikov <dsh@vlink.ru>

14:12 leeym 

- add nettop-0.2.3

Nettop is a program which looks like top, but is for network packets.
It requires libpcap and slang to be installed on your computer.

WWW: http://srparish.net/scripts/

11:29 garga 

PySNMP is fully functional SNMP v.1 engine (BER encoders/decoders
for a subset of ASN.1 data types, sockets based networking etc.)
written entirely in Python.  This package provides command-line utilities
(pysnmpget, etc).

WWW: http://pysnmp.sourceforge.net/

PR:             ports/95675
Submitted by:   Martin Jackson <mhjacks@swbell.net>

11:27 garga 

PySNMP is fully functional SNMP v.1 engine (BER encoders/decoders
for a subset of ASN.1 data types, sockets based networking etc.)
written entirely in Python.  This package provides additional python-format
MIB files for use with PySNMP.

WWW: http://pysnmp.sourceforge.net/

PR:             ports/95674
Submitted by:   Martin Jackson <mhjacks@swbell.net>

11:25 garga 

PySNMP is fully functional SNMP v.1 engine (BER encoders/decoders
for a subset of ASN.1 data types, sockets based networking etc.)
written entirely in Python.

WWW: http://pysnmp.sourceforge.net/

PR:             ports/95673
Submitted by:   Martin Jackson <mhjacks@swbell.net>

01:04 pav 

Nagcon is a console application interfacing to Nagios 2.0 which gives
you an overview of all services with troubled services.

WWW: http://www.vanheusden.com/nagcon

PR:             ports/95096
Submitted by:   Douglas K. Rand <rand@meridian-enviro.com>

22:58 pav 

- Retire net-mgmt/nfdump-devel

PR:             ports/95006
Submitted by:   Janos Mohacsi <janos.mohacsi@bsd.hu> (maintainer)

11:57 tobez 

Add net-mgtm/p5-Net-IP-Resolver 0.01, a Perl module to resolve IPs to a
particular network.

11:52 tobez 

Add net-mgmt/p5-Net-IP-Match-XS 0.03, a Perl module to efficiently match
IP addresses against IP ranges.

12:45 tdb 

- Add bwm-ng:

Bandwidth Monitor NG is a small and simple console-based live
bandwidth monitor for Linux, BSD, Solaris, Mac OS X and others.

Short list of features:

    * supports /proc/net/dev, netstat, getifaddr, sysctl, kstat and libstatgrab
    * unlimited number of interfaces supported
    * interfaces are added or removed dynamically from list
    * white-/blacklist of interfaces
    * output of KB/s, Kb/s, packets, errors, average, max and total sum
    * output in curses, plain console, CSV or HTML
    * configfile

WWW: http://www.gropp.org/

06:29 brooks 

Add net-mgmt/rubygem-snmp:

This library implements SNMP (the Simple Network Management
Protocol). It is implemented in pure Ruby, so there are no dependencies
on external libraries like net-snmp. You can run this library anywhere
that Ruby can run.

19:01 sem 

radauth was developed to allow for command line authentication
against a radius server.  This allows for more rapid
testing/troubleshooting of radius authentication problems depending
upon the method by which the person is authenticating (dial-up
customers come to mind).

Author: Matt Miller <mmiller_at_hick.org>
WWW:    http://freshmeat.net/projects/radauth/

PR:             ports/91975
Submitted by:   Andrew Kilpatrick <tiger_at_whitetigersd.com>

23:56 pav 

- After repocopy, add development version of nfdump at 1.5

PR:             ports/91725
Submitted by:   Janos Mohacsi <janos.mohacsi@bsd.hu> (maintainer)
Repocopied by:  marcus

20:41 edwin 

New port: net-mgmt/chillispot

        Chillispot is used for authenticating users of a wireless
        LAN. It support WPA (Wireless Protected Access) encryption.
        Authentication, authorization and accounting (AAA) is handled
        by your favorite radius server.

PR:             ports/90397
Submitted by:   Sevan Janiyan <venture37@geeklan.co.uk>

03:16 lawrance 

Remove expired ports.

09:03 tobez 

Add net-mgmt/p5-NSNMP, a fast, flexible, low-level, pure-Perl SNMP
library.

21:34 tdb 

- Add net-mgmt/check_snmp_pkgvuln

  check_snmp_pkgvuln is a Nagios plugin that detects hosts that are running
  vulnerable ports based on the database of security vulnerabilities
  provided by portaudit.  The plugin communicates with the host via SNMP
  using the HOST-RESOURCES-MIB::hrSWInstalledName MIB.

  WWW: http://www.cultdeadsheep.org/~clement/

Approved by:    clement (mentor)

18:04 pav 

Aircrack is a set of tools for auditing wireless networks:

* airodump: 802.11 packet capture program
* aireplay: 802.11 packet injection program
* aircrack: static WEP and WPA-PSK key cracker
* airdecap: decrypts WEP/WPA capture files
* arpforge: forges ARP packets

At the moment airodump and aireplay cannot be built on FreeBSD

PR:             ports/88870
Submitted by:   Lars Engels <lars.engels@0x20.net>

23:49 edwin 

[New Port] net-mgmt/ourmon: Network Monitoring and Anomaly Detection System

        Ourmon is a network management and anomaly detection system
        for performing various SNMP RMON-like network analysis
        tasks.  It uses the BSD bpf in combination with RRDTOOL as
        well as various "top talker" style tuples including:  top-N
        flows which include IP, TCP, UDP, and ICMP flows, top SYN
        senders, top TCP/UDP ports, top single IP src to many IP
        dst senders, top single IP src to L4 (TCP/UDP), top ICMP
        errors which includes UDP creators of ICMP errors and other
        tools for both network management and anomaly detection.
        RRDTOOL graphs include a year of baselined information.
        New RRDTOOL graphs may be designed with user-configured BPF
        expressions a la tcpdump.  Reports and logging for top
        talkers are also included.

        WWW: http://ourmon.cat.pdx.edu/ourmon/

PR:             ports/84530
Submitted by:   Charlie Schluting <manos@cs.pdx.edu>

13:24 edwin 

New port: net-mgmt/torrus The Data Series Processing Framework -
think mrtg with xml configs

Torrus is designed to be the universal data series processing framework.
Although most users deploy Torrus for SNMP monitoring, it might be useful for
data series of any nature. Tobi Oetiker's RRDtool is used for data storage.

    * Configuration compiler and validator. It processes the XML configuration
      files and saves the configuration into a database.
    * View renderer and the web interface. They generate HTML and the graphical
      representation of the datasources and provide user authentication and
      authorization. All generated output is controlled by the configuration
      parameters and templates. The users can easily create their own
      presentation of data series.
    * SNMP Collector. Modular collector core architecture allows further
      extension with new collector and storage types. Any datasource can have
      its own polling schedule.
    * SNMP Device Discovery Tool. Devdiscover is a new, modular, flexible, and
      expandable tool for automatic generation of Torrus configuration files.
      New device types and MIBs are easily added as independent Perl modules.
    * Threshold monitor. All data, regardless of their type and nature, can be
      monitored according to the user-defined rules. The rules can also include
      the datasource-specific parameters, e.g. boundary values etc. The
      thresholds are specified by RPN expressions.

WWW: http://torrus.org

- Corey Smith
corsmith@gmail.com

PR:             ports/86634
Submitted by:   Corey Smith <corsmith@gmail.com>

12:28 pav 

Network Leak Finder is a collection of small perlscripts that detects
connectivity between network segments. It is mostly useful to detect "leaks" in
large organizations that have private network segments physically separated
from the Internet.

PR:             ports/88424
Submitted by:   Vaida Bogdan <vaidab@phenix.rootshell.be>

07:40 az 

Add net-mgmt/grepip

grepip searches the named input FILE (or standard input if no files are named),
for lines containing an IP address matched to the given CIDR.
grepip finds IP in any context of a line, while grepcidr only if all line is IP.

PR:             ports/88384
Submitted by:   Serge Maslov <serge@maslov.biz>
Approved by:    sem (mentor, implict)

11:29 arved 

Add nagios-spamd-plugin, which monitors Spamassassins spamd

17:27 hq 

PfPro is a cross-platform GUI fat client for managing configurations
for the PF firewalling system.

WWW: http://pfpro.sourceforge.net/

PR:             86743
Submitted by:   Adam VanderHook <acidos@bandwidth-junkies.net>

17:32 mnag 

New port

This is a mini-SNMP daemon. The basic daemon implements the system group
and a number of private extensions to manage the UDP transport mapping,
communities, trap destinations and loadable modules. In this form it can
be used to provide remote access to arbitrary data that can be described in
the form as required by the SMI. The daemon speaks both SNMPv1 and SNMPv2c.

PR:             86400
Submitted by:   Andrey V. Elsukov <bu7cher@yandex.ru>
Approved by:    pav (mentor)

05:03 edwin 

net-mgmt/grepcidr: Filter IP addresses matching IPv4 CIDR/network specification

    grepcidr can be used to filter a list of IP addresses against
    one or more Classless Inter-Domain Routing (CIDR) specifications,
    or arbitrary networks specified by an address range. As with
    grep, there are options to invert matching and load patterns
    from a file.  grepcidr is capable of comparing thousands or
    even millions of IPs to networks with little memory usage and
    in reasonable computation time.

    grepcidr has endless uses in network software, including: mail
    filtering and processing, network security, log analysis, and
    many custom applications.

PR:             ports/80315
Submitted by:   Douglas Fraser <doug+ports@idmf.net>

10:33 sem 

net-mgmt/nfsen: Web based frontend to nfdump netflow collector

PR:             ports/79950
Submitted by:   Janos Mohacsi <janos.mohacsi@bsd.hu>

10:05 flz 

- Add nagios12 to the build.

12:52 erwin 

Add ipv6gen 0.8, iPv6 prefix generator.

PR:             ports/79520
Submitted by:   Vladimir Kotal <vlada@devnull.cz>

12:34 skv 

Add ng_ipacct 20050228, Netgraph IP accounting.

21:01 pav 

Yet Another Bandwidth Meter displays current bandwidth utilization using the
PNG image format. It somewhat resembles the Linux bwbar (although there is no
connection to it).

Features include measurement both on interface and assigned IP-address basis,
possible to run non-root and non-setuid, quite customizable (colours, geometry,
device max speed, etc). It also includes text output to the image.

PR:             ports/76275
Submitted by:   Fredrik Lindberg <fli@shapeshifter.se>

07:12 erwin 

Readd nagios-snmp-plugins that was removed by accident in rev. 1.38

07:43 ahze 

Add pads 1.1.3, passively detect network assets.

PR:             ports/77801
Submitted by:   Andrew Thompson <andy@fud.org.nz>

23:44 kris 

As previously announced, remove ports that have reached their expiry date,
and the handful of ports that depended on them.

15:49 arved 

Add py-yapsnmp, yet another Python SNMP module based on net-snmp library

05:32 edwin 

New port: net-mgmt/ipplan (4.0.2)

        New port: net-mgmt/ipplan
        Version: 4.0.2
        Description: IP address management and tracking

PR:             ports/74621
Submitted by:   Maxim Tuliuk <mt@zoo.top.net.ua>

07:29 anders 

Add NAV (Network Administration Visualized), a network administration
package from NTNU - Norwegian University of Science and Technology.

This port is work-in-progress, currently.

Sponsored by:   University of Tromsø

21:06 pav 

Add softflowd, flow-based network traffic analyser capable of Cisco NetFlow
data export. Softflowd semi-statefully tracks traffic flows recorded by
listening on a network interface or by reading a packet capture file.
These flows may be reported via NetFlow to a collecting host or summarised
within softflowd itself.

PR:             ports/73723
Submitted by:   Janos Mohacsi <janos.mohacsi@bsd.hu>

20:52 pav 

Add flowd, a small, fast and secure NetFlow collector. It offers the following
features:

* Understands NetFlow protocol v.1, v.5, v.7 and v.9 (including IPv6 flows)
* Supports both IPv4 and IPv6 transport of flows
* Secure: flowd is privilege separated to limit the impact of any compromise
* Supports filtering and tagging of flows, using a packet filter-like syntax
* Stores recorded flow data in a compact binary format which supports
  run-time choice over which flow fields are stored
* Ships with both Perl and Python interfaces for reading and parsing the
  on-disk record format
* Is licensed under a liberal BSD-like license

PR:             ports/73722
Submitted by:   Janos Mohacsi <janos.mohacsi@bsd.hu>

12:29 skv 

Add p5-POE-Component-SNMP 0.92, event-driven SNMP interface.

00:24 sergei 

Add net-mgmt/tcptrack:

tcptrack is a sniffer which displays information about TCP connections it
sees on a network interface. It passively watches for connections on the
network interface, keeps track of their state and displays a list of
connections in a manner similar to the unix 'top' command. It displays
source and destination addresses and ports, connection state, idle time, and
bandwidth usage.

WWW: http://www.rhythm.cx/~steve/devel/tcptrack

PR:             ports/72543
Submitted by:   Tor Halvard Furulund <squat@squat.no>

23:48 sergei 

Add net-mgmt/nfdump:

NFDUMP tools support netflow v5 and v7 capturing and processing.

nfcapd - netflow capture daemon.
Reads the netflow data from the network and stores the data into files.

nfdump - netflow dump.
Reads the netflow data from the files stored by nfcapd. It's syntax is similar
to tcpdump. If you like tcpdump you will like nfdump.

nfprofile - netflow profiler.
Reads the netflow data from the files stored by nfcapd. Filters the netflow
data according to the specified filter sets ( profiles ) and stores the
filtered data into files for later use.

nfreplay - netflow replay
Reads the netflow data from the files stored by nfcapd and sends it over
the network to another host.

WWW: http://nfdump.sourceforge.net

PR:             ports/72171
Submitted by:   Janos Mohacsi <janos.mohacsi@niif.hu>

16:41 pav 

Add py-flowtools, an extension module gives you a simple python interface
to NetFlow data as stored by Mark Fullmer's flow-tools package.

PR:             ports/72684
Submitted by:   Roman Bogorodskiy <bogorodskiy@inbox.ru>

17:58 mharo 

activate nrpe2

17:08 sem 

Netmond - IP network monitoring daemon.

PR:             ports/65033
Submitted by:   Viktor Fomichev <vfom@narod.ru>

19:39 sem 

Netwag is a graphical front end for netwox.

PR:             ports/70307
Submitted by:   Janos Mohacsi <janos.mohacsi@bsd.hu>

12:18 arved 

Add SNMP::Info, an object oriented perl5 interface to Network devices and
various common MIBs

12:21 jesper 

Remove p5-JUNOScript port, hopeless out of date, and I do not have access
to Juniper equipment to test any updates to this port.

08:33 sem 

NRG is a system for maintaining and visualizing network data and
other resource utilization data.

PR:             ports/69504
Submitted by:   Michael Ranner <mranner@inode.at>

09:37 sem 

* lcrzoex tools was renamed to netwox
* update to 5.20.0 and move to net-mgmt category
* new maintainer

PR:             ports/69609
Submitted by:   Janos Mohacsi <janos.mohacsi@bsd.hu>

06:34 bms 

Add new port nagios-silfreed-plugins, a set of SNMP oriented plugins for
Nagios from silfreed.net believed to work significantly better than the
bundled check_snmp plugin for most uses.

05:48 sem 

To ease the task of network administration,
decrease the likelihood of erronous command execution and
to maintain all network services from a central point,
EnderUNIX SDT anounces the availability of its 9th open-source tool,
netUstad.

It has been coded in C language and includes its own HTTP server.
The newly anounced version provides a web interface for
system administrators to add/delete/update IPFW rulesets.

You can manage your IPFW firewall via a TCP/IP connected remote PC, easily.
Development version icludes modules to manage whole
network services (routing tables, network interfaces)

PR:             ports/69176
Submitted by:   Ozkan KIRIK <ozkan@enderunix.org>
Approved by:    krion (mentor) (implicitly)

01:48 ijliao 

add nagiostat 1.0.0
Nagiostat parses performance-data from Nagios and generates graphs

PR:             69370
Submitted by:   Janos Mohacsi <mohacsi@niif.hu>

12:13 bms 

Add new port nagios-snmp-plugins, which contains plugins to monitor
disk and cpu usage remotely via SNMP, using the UCD-SNMP-MIB
dskTable and prTable entitites.

09:26 edwin 

Simple traffic analysis and data reporting collection server for LFAP

    This package contains a small Lightweight Flow Accounting (LFAP)
    server and LFAP API library. LFAP open solution to delivering
    accounting data from Riverstone Networks Switches and Routers.

    You can use the sfas program to obtain micro-flow information
    from a Riverstone switch running either in Layer 4 bridging
    mode, routing or MPLS LSPs. Data that can be collected includes
    everything  from an IPv4 header and UDP headers and the src/dst
    port from a TCP header.

    WWW: http://www.riverstonenet.com/support/nmops/

09:18 ale 

Add a new shared extension for PHP.

08:27 ale 

Add a new shared extension for PHP.

16:56 bms 

Committed (with some fixups), thanks!

PR:             ports/67327
Submitted by:   Paul Chvostek

13:16 clement 

Remove dhcpconf entry (forgotten in previous commit)

18:41 bms 

SNMPTT (SNMP Trap Translator) is an SNMP trap handler written in Perl
for use with the Net-SNMP / UCD-SNMP snmptrapd program (www.net-snmp.org).

21:16 se 

This port builds the Argus clients, which used to be bundled
with the Argus daemon, until release 2.0.6 of Argus.

15:25 pav 

Add kismet, an 802.11 layer2 wireless network detector, sniffer, and intrusion
detection system.  Kismet will work with any wireless card which supports raw
monitoring (rfmon) mode, and can sniff 802.11b, 802.11a, and 802.11g traffic.

PR:             ports/66274
Submitted by:   Thomas Spreng <spreng@socket.ch>

01:59 ijliao 

add TkTopNetFlows 0.4
GUI tool for NetFlow data visualisation

PR:             65542
Submitted by:   Viktor Fomichev <vfom@narod.ru>

07:29 kris 

Remove category pkg/COMMENT files in favour of a COMMENT variable in the
category makefile.

Submitted by:   Matthew Seaman <m.seaman@infracaninophile.co.uk>
PR:             59651

13:45 pav 

Add apan, an addon to Nagios that is used to collect results from Nagios
plugins and store it in RRD-files. You can the use Apan to view graphs of
the data in Nagios web-interface.

WWW: http://apan.sourceforge.net

PR:             ports/64941
Submitted by:   Janos Mohacsi <janos.mohacsi@bsd.hu>

13:33 pav 

Add sdig, Switch Digger, a program designed to track down computers
to the finest level of information available at the moment. Sometimes this
can mean an exact description of a port in a building anywhere in an enterprise.

PR:             ports/64728
Submitted by:   Russell Jackson <rjackson@cserv62.csub.edu>

07:15 bms 

Big Sister is a flexible network and system monitor with SNMP integration
and a web interface.

08:49 krion 

Add arpscan-0.2,

arpscan is a very simple scanner which sends out arp requests
for the given IP addresses and displays a list of the found
hosts.

PR:             ports/64605
Submitted by:   David Yeske <dyeske@yahoo.com>

06:52 krion 

- Move arpwatch-devel to new category - net-mgmt

PR:             ports/64483
Submitted by:   Matthew George <mdg@secureworks.net>

04:42 wollman 

Say hello to the new "net-mgmt" category.  There are probably more
ports that belong here than the ones I have identified and moved in
this, first, pass.

Approved in principle by: marcus

05:14 marcus 

Add the net-mgmt category, but do not connect it to the build until it has
some ports.