| Port details |
- gnu-ipcalc Modern network address calculation tool for IPv4 and IPv6
- 1.0.3_1 net-mgmt
 =4      1.0.3_1Version of this port present on the latest quarterly branch. - Maintainer: ehaupt@FreeBSD.org
- Port Added: 2016-09-09 15:58:51
- Last Update: 2024-01-12 22:40:48
- Commit Hash: 9f8f710
- People watching this port, also watch:: ipmitool, roundcube-php82, fcgiwrap, fortune-mod-freebsd-classic, nginx
- License: GPLv2
- WWW:
- https://gitlab.com/ipcalc/ipcalc/
- Description:
- This is a modern tool to assist in network address calculations for IPv4 and
IPv6. It acts both as a tool to output human readable information about a
network or address, as well as a tool suitable to be used by scripts or other
programs.
It supports printing a summary about the provided network address, multiple
command line options per information to be printed, transparent IPv6 support,
and in addition it will use libGeoIP if available to provide geographic
information.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- gnu-ipcalc>0:net-mgmt/gnu-ipcalc
- Conflicts:
- CONFLICTS_INSTALL:
- To install the port:
- cd /usr/ports/net-mgmt/gnu-ipcalc/ && make install clean
- To add the package, run one of these commands:
- pkg install net-mgmt/gnu-ipcalc
- pkg install gnu-ipcalc
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: gnu-ipcalc
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1686294069
SHA256 (ipcalc-ipcalc-c341e55be386649c0a5347eefeae410753c4e753_GL0.tar.gz) = 27a67c54b8cff07eacf4337898f54295acecf60186fddc11bc4470c304c76bf8
SIZE (ipcalc-ipcalc-c341e55be386649c0a5347eefeae410753c4e753_GL0.tar.gz) = 56542
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- ronn : textproc/rubygem-ronn
- meson : devel/meson
- ninja : devel/ninja
- pkgconf>=1.3.0_1 : devel/pkgconf
- There are no ports dependent upon this port
Configuration Options:- ===> The following configuration options are available for gnu-ipcalc-1.0.3_1:
DOCS=on: Build and/or install documentation
MAXMINDDB=off: Enable GeoIP1 + GeoIP2 Support
===> Use 'make config' to modify these settings
- Options name:
- net-mgmt_gnu-ipcalc
- USES:
- localbase meson pkgconfig
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
1.0.3_1
12 Jan 2024 22:40:48
 |
Muhammad Moinur Rahman (bofh) |
*/*: Sanitize MANPREFIX for meson ports
Approved by: portmgr |
1.0.3
12 Jul 2023 18:56:04
|
Felix Palmen (zirias) |
bsd.sites.mk: Update all ports using USE_GITLAB
Replace GL_COMMIT by GL_TAGNAME in all ports. The new GL_TAGNAME is
backwards-compatible (accepting any commit hash as before), but also
understands an actual tag name. Moving to tag names where appropriate is
left to individual ports' maintainers.
Approved by: portmgr (tcberner, mentor)
Differential Revision: https://reviews.freebsd.org/D37077 |
1.0.3
09 Jun 2023 07:06:02
|
Emanuel Haupt (ehaupt) |
net-mgmt/gnu-ipcalc: Update to 1.0.3 |
1.0.2
30 Mar 2023 02:11:57
|
Jan Beich (jbeich) |
net-mgmt/gnu-ipcalc: unbreak with --auto-features=enabled
meson.build:48:1: ERROR: Dependency "geoip" not found, tried pkgconfig
PR: 270361
Reported by: antoine (via exp-run) |
1.0.2
27 Nov 2022 13:35:43
|
Emanuel Haupt (ehaupt) |
net-mgmt/gnu-ipcalc: Update to 1.0.2 |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
1.0.1_1
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
1.0.1_1
20 Jul 2022 14:22:42
|
Tobias C. Berner (tcberner) |
net-mgmt: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* @BABOLO <.@babolo.ru>
* Alex Samorukov, samm@freebsd.org
* Alexander Kriventsov <avk@vl.ru>
* Alexander Sulfrian <alexander@sulfrian.net>
* Alexander Y. Grigoryev <alexander.4mail@gmail.com>
* Alexandre Biancalana <ale@biancalanas.net>
* Alexandre Snarskii <snar@paranoia.ru>
* Alexandre Snarskii <snar@snar.spb.ru>
* Alexey Bobkov <mr.deadlystorm@gmail.com>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alexey V. Degtyarev (Only the first 15 lines of the commit message are shown above ) |
1.0.1_1
23 Nov 2021 22:11:40
|
Stefan Eßer (se) |
*/*: Remove redundant '-[0-9]*' from CONFLICTS_INSTALL
The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").
Approved by: portmgr (blanket) |
1.0.1_1
10 Sep 2021 16:32:39
|
Emanuel Haupt (ehaupt) |
net-mgmt/gnu-ipcalc: Fix hardcoded path to geoip database
PR: 258400
Reported by: freebsd@ohreally.nl |
1.0.1
08 Sep 2021 21:28:45
|
Emanuel Haupt (ehaupt) |
net-mgmt/gnu-ipcalc: Update to 1.0.1
- Upstream has move to GitLab
- Use meson instead of gmake
- Optionally support GeoIP1 + GeoIP2 via net/libmaxminddb
PR: 258363 (based on)
Reported by: freebsd@ohreally.nl |
0.2.3_1
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.2.3_1
13 Jan 2019 20:58:37
 |
adamw |
Remove GeoIP-related options. Where possible, replace GeoIP 1 defaults
with GeoIP 2.
Also, as suggested by zi, add an UPDATING note about this. |
0.2.3
28 May 2018 05:40:25
|
ehaupt |
Update to 0.2.3 |
0.2.2
10 Feb 2018 10:55:31
|
ehaupt |
Update to 0.2.2 |
0.2.0_1
21 Aug 2017 06:27:10
|
ehaupt |
Fix geoip support by providing LIBPATH.
PR: 221682
Submitted by: tmasu@st.rim.or.jp |
0.2.0
16 May 2017 19:52:45
|
ehaupt |
- Update to 0.2.0
- Specify LICENSE_FILE |
0.1.8
09 Sep 2016 15:58:43
|
ehaupt |
Add gnu-ipcalc 0.1.8, modern network address calculation tool for IPv4
and IPv6. |
As an Amazon Associate I earn from qualifying purchases.