Qt4 deprecation: Remove Qt4 and its consumes.

2019-03-15 accessibility/qt4-accessible: Qt4 has been EOL since december 2015
2019-03-15 astro/qlandkartegt: Qt4 has been EOL since december 2015
2019-03-15 astro/stellarium-qt4: Qt4 has been EOL since december 2015
2019-03-15 astro/xglobe: Qt4 has been EOL since december 2015
2019-03-15 audio/acoustid-fingerprinter: Qt4 has been EOL since december 2015
2019-03-15 audio/cueplayer: Qt4 has been EOL since december 2015
2019-03-15 audio/esperanza: Qt4 has been EOL since december 2015
2019-03-15 audio/lastfm-desktop: Qt4 has been EOL since december 2015
2019-03-15 audio/minitunes: Qt4 has been EOL since december 2015
2019-03-15 audio/mixxx20: Qt4 has been EOL since december 2015
2019-03-15 audio/mumble: Qt4 has been EOL since december 2015
2019-03-15 audio/murmur: Qt4 has been EOL since december 2015
2019-03-15 audio/puddletag: Qt4 has been EOL since december 2015

Mark QT4 ports/functionality for removal on 2019-03-15

While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.

Submitted by:	tcberner
Reviewed by:	adridg, jhale, rene, tcberner
Approved by:	portmgr (implicit, flavor hook)
Differential Revision:	https://reviews.freebsd.org/D17741

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

2 ports categories: Remove $PTHREAD_LIBS

Categories: net-p2p, comms

Note that qrq was not properly staged, it failed stage-QA.
aprsd failed check-plist; it had a plist orphan.  Now it fails stage-QA
with a fs violation, but it may be acceptable.  Fixes added to both.

approved by:	PTHREAD blanket

- Switch to linguisttools_build

- Reset maintainership of my ports

Cleanup plist

Convert a bunch of USE_BZIP2 to USES=tar:bzip2

Approved by:	portmgr (not really, but touches unstaged ports)

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

- STAGE-clean
- Enhance COMMENT
- Convert to new Fix LIB_DEPENDS format
- Add LICENSE

- Remove manual creation and removal of share/applications, as it's now in the
mtree (categories starting with [np])

Approved by:	portmgr (bdrewery)

net-p2p/valknut: add <unistd.h> for modern compilers

Approved by:	portmgr (bapt, implicit)

Add NO_STAGE all over the place in preparation for the staging support (cat:
net-p2p)

Add an explicit dependency on pkgconf

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Kick MD5 Support

- DISTNAME= ${PORTNAME}-${PORTVERSION} is the default and not needed.

PR:             ports/153292
Submitted by:   myself (pgollucci)
Tested by:      -exp run by pav
Approved by:    portmgr (pav)

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with N

Fix build on 6-stable after Qt update.

Approved by:    gahr (maintainer)

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Fix Qt dependencies [1]
- Separate CFLAGS from CONFIGURE_ENV

PR:             134899
Submitted by:   makc

- Update to 0.4.9

- Fix PLIST

Reported by:    QA Tindie

- Update to 0.4.8

- Update to 0.4.7

- Fix build when automake and qt3 are installed

- Update to 0.4.5

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

- Update to 0.4.4

- Update to 0.4.3

- Fix QT4 modules dependency list
- Bump portrevision

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Fix check for OpenSSL support in dclib

- Update to 0.4.0
- Take maintainship

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Update to 0.3.13

Approved by:    miwi (mentor)

- Update to 0.3.10
- Update pkg-descr to point to the new homepage [1]
- Some small tidy-ups to the port [1]

PR:             114118 [1]
Submitted by:   Shane Bell <decept0@gmail.com>

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Fix build with gcc41

Remove USE_REINPLACE from all categories starting with N

Drop maintainership

Populate newly create net-p2p category with these ports:

  ftp/jigdo
  net/amule1
  net/amule2
  net/apollon
  net/azureus
  net/bnbt
  net/btpeer
  net/btqueue
  net/cdonkey
  net/ctorrent
  net/dcd
  net/dclib
  net/dctc