Asterisk is an Open Source PBX and telephony toolkit. It is, in a
sense, middleware between Internet and telephony channels on the bottom,
and Internet and telephony applications at the top.
WWW: http://www.asterisk.org
===> The following configuration options are available for asterisk11-11.25.3:
BACKTRACE=on: Stack backtrace support via (lib)execinfo
CURL=on: Data transfer support via cURL
DAHDI=on: DAHDI support
EXCHANGE=off: Exchange calendar support
FREETDS=on: FreeTDS library support
LDAP=off: LDAP protocol support
LUA=on: Lua scripting language support
MP3PLAYER=on: Install MP3 Player for Music-On-Hold (mpg123)
OOH323=off: ooh323 support
OPTIMIZED_CFLAGS=off: Use extra compiler optimizations
RADIUS=on: RADIUS protocol support
SNMP=on: SNMP network protocol support
SPANDSP=on: SpanDSP faxing support
SRTP=off: SecureRTP support
SYSINFO=off: Use devel/libsysinfo to get system information
UUID=on: libuuid support (required for ICE and TURN in RTP)
XMPP=on: XMPP/GTALK support
====> Menuselect Interface Backend: you have to choose at least one of them
NCURSES=off: Console (text) interface support
NEWT=on: Newt User Interface
====> Encoder/Decoder (Codec) Support
GSM=on: GSM codec support
NEWG711=off: New G711 codec
SPEEX=on: Speex audio format support
VORBIS=on: Ogg Vorbis audio codec support
====> Database Support
MYSQL=on: MySQL database support
ODBC=on: ODBC database backend
PGSQL=on: PostgreSQL database support
SQLITE2=on: SQLite 2 database support
====> Core and Music-on-Hold (MoH) Sound Files
G729=off: Install G.729 format sounds
====> Compiler to use: you have to select exactly one of them
BASE=off: Use base compiler (experimental)
GCC=on: Build with modern GCC (from ports)
===> Use 'make config' to modify these settings
###########################################################################
This port supports custom Asterisk configurations using a *user-supplied*
menuselect.makeopt file.
This feature is of most value for users that want to disable or override
default functionality that they dont want or need, particular in space
and/or resource constrained, or embedded environments.
If a file named ".asterisk.makeopts" is found in the ports files/
directory, its contents will be used to configure Asterisk at the
post-configure stage.
If the file is *not* found, the port will default to a 'normal' Asterisk
menuselect configuration, and only execute menuselect commands according
to what port OPTIONS the user has selected.
The format of this file is the same as the output of a standard
`make menuselect` command, as per standard build instructions for
Asterisk.
NOTE: The contents of this file *MUST* be syntactically and semantically
valid, as the port does *NOT* perform validation of this file.
In particular, ensure that all Asterisk options have their
dependencies met, using the corresponding port OPTIONS dependencies.
The `menuselect --check-deps` command can be used to verify the
configuration
The following related documentation resources are also available:
* https://wiki.asterisk.org/wiki/display/AST/Using+Menuselect+to+Select+Asterisk+Options
* http://www.asteriskdocs.org/en/3rd_Edition/asterisk-book-html-chunk/installing_base_configuration.html#Installing_id293213
################################################################################
Make the provided rc script more robust.
Also add an asterisk_stopsleep knob (disabled by default) to allow
users to work around a possible race condition when asterisk is sent
a stop command just after launching, but before it's startup is
actually completed.
PR: 221271
Submitted by: O. Hartmann <ohartmann@walstatt.org>
MFH: 2017Q3
- Prevent asterisk build system from unconditionally using
-march=native [1]
- Add an OPTIMIZED_CFLAGS option, disabled by default, to allow
enabling the native flag
- While here, convert to option target helpers.
Reported by: "Andrey V. Elsukov" <bu7cher at yandex.ru> (via email) [1]
MFH: 2017Q2
Mark some ports failing on armv6, for errors classified as "configure_error".
Note: this skips all the ports that _sometimes_ fail with CMake errors. We
need to investigate that problem, and find out if it is specific to the qemu
environment.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
- Force asterisk11 to use bundled libedit, otherwise it could link
with ports provided one, with which it has incompatibilities
- While here, remove asterisk 1.8 from CONFLICTS, it is not available
anymore as a port
PR: 218752
Submitted by: yani@pi-greece.eu
Force asterisk to use it's internal iLBC implementation.
This prevents asterisk configure script from being confused by
net/libilbc (which is not compatible) if installed on the system.
PR: 210074
Submitted by: Nikolay <technotrance at list.ru>
- Update net/asterisk11 to 11.21.2, which provides a fix for the
old OpenSSL included in 9.x
- Backport the fis to net/asterisk (asterisk 1.8)
- net/asterisk13 already includes this fix, so remove my workaround
While here, asterisk 1.8 reached EOL on 2015-10-21, so DEPRECATE
it and add an expiration time.
MFH: 2016Q1
- Add security fixes to net/asterisk port (PORTVERSION bumped)
- Update net/asterisk11 to 11.21.1
- Update net/asterisk13 to 13.7.1
The security update included in these commits introduces an unexpected
incompatibility with FreeBSD 9.3 bundled OpenSSL.
Unluckily simply forcing this port to use ports provided openssl
on 9.x isn't viable, since ftp/curl by default links with base
openssl. A default binary package would just crash on startup
when loading the asterisk curl module, due to conflicting openssl
implementations being used.
This commit adds a check in the Makefile, copied from the ftp/curl
port, which removes the offending (and unsupported on that openssl
version) code from the source file when linking against base OpenSSL
on 9.x.
Security: 559f3d1b-cb1d-11e5-80a4-001999f8d30b
MFH: 2016Q1
- Enable SPANDSP option by default
- Make startup script create pidfile directory if it does not exist
While here, reflow OPTIONS_DEFAULT lists.
Subitted/Requested by: lidl@
Remove iconv(), iconv_open() and iconv_close() symbols from libiconv.
These were FreeBSD specific aliases for libiconv(), libiconv_open() and
libiconv_close() that are now also provided by libc which complicates
writing configure tests that work correctly when both libc iconv and
libiconv are available.
Also, because the libiconv iconv.h header redefines iconv* to libiconv*
correct use of the header implies that the aliases aren't used.
The following ports needed fixes because there was something wrong with
the way they tried to detect or use iconv:
audio/deadbeef: Remove LIBICONV_PLUG from a source file. It's a
compile-time option and should not be set in source code.
(Only the first 15 lines of the commit message are shown above )
- Update net/asterisk11 to 11.20.0
- Update net/asterisk13 to 13.6.0
- Remove upstreamed patch
In net/asterisk13:
- Add ASTVERSION option to control installation of bash only script
astversion, and avoid an unconditional dependency on bash
Remove uneeded patches.
These have been superceded when upstream made asterisk versions 11
and newer buildable with clang.
PR: 203212
Submitted by: dmitry2004 at yandex.ru
Integrate recent changes to asterisk port in asterisk11 and asterisk13
ones:
This port now supports custom Asterisk configurations using a
*user-supplied* menuselect.makeopt file.
This feature is of most value for users that want to disable or
override default functionality that they dont want or need, particular
in space and/or resource constrained, or embedded environments.
For more information see this ports pkg-message file.
OPTIONS Changes:
- Make speex, libexecinfo and mpg123 OPTION'al
(Only the first 15 lines of the commit message are shown above )
- Update net/asterisk11 to 11.19.0
- Update net/asterisk13 to 13.5.0
- Add SQLITE2 option default description
- Rename SQLITE option to SQLITE2, which better describes what it really does
- Clean up Makefile and sort option helpers [1]
- Add missed dependencies on openssl, ncurses and iconv [1]
- Add back shabangfix for sample agi scripts
- Make build log verbose [1]
- Regenerated some patches
Suggested by: koobs (thanks!) [1]
- Update asterisk11 to 11.18.0
- Update asterisk13 to 13.4.0
- Add experimental option to allow using base compiler instead of
ports gcc (mainly meant to allow compiling with clang)
- Add SYSINFO option to asterisk ports and force them to respect
it, otherwise they fail to build when devel/libsysinfo port is
already present on system.
While here:
- Silence some Makefile commands
- Remove mostly obsolete comment from option description
Reported by: Bob Eager <bob@eager.cx>
MFH: 2015Q2
- Update net/asterisk11 to 11.17.0
- Update net/asterisk13 to 13.3.0
- Fix mgcp module installation
- Add needed USE_LDCONFIG to asterisk13
- Adapt asterisk-g72x port and bump PORTREVISION
NOTE: While these versions of asterisk can be compiled with clang,
I have seen it crash at startup if so compiled. For this reason at
present I'm leaving the gcc requirement.
net category: Remove $PTHREAD_LIBS
openafs did not pass check-plist (pre-existing) so fixed and bumped.
Also, pkg-plist was sorted. mediatomb and spread also fail plist-checks
but they weren't fixed.
approved by: PTHREAD blanket
- rename www/neon29 to www/neon and update to neon-0.30.1
- adjust ports depending on neon, bump PORTREVISION
Changelog:
Fix memory leak with GnuTLS (Werner Baumann, Patrick Ohly).
Fix possible crash after DNS lookup errors on Windows (Olivier Goffart).
Don't fail if the SSL cert changes between connections with OpenSSL, behaviour
now matches that with GnuTLS.
Fix PKCS#11 support under OpenSSL with TLS 1.2.
Fix static linking with pkg-config file (Alan H)
PR: 195786
Differential Revision: https://reviews.freebsd.org/D1319
Submitted by: ohauer
Reviewed by: portmgr (bapt, mat)
Approved by: portmgr, lev (implicit)
- Improve wording and formatting (most notably, missing space before opening
parenthesis) in some buggy option descriptions
- Standardize Makefile header when appropriate, drop one OPTIONS_DEFAULT=IPV6
- Update comms/spandsp to version 0.0.6 [1]
- Convert all comms/spandsp-devel consumers to use newer comms/spandsp
- Bump affected ports
- Mark comms/spandsp-devel as deprecated and set expiration date
- Add upgrade instructions to UPDATING
PR: 194399 [1]
Submitted by: Nikola Kolev <koue@chaosophia.net> [1]
Approved by: madpilot (asterisk ports), maintainer timeout (other)
- Update to 11.14.2
- Update home page in pkg-descr [1]
Security: 94268da0-8118-11e4-a180-001999f8d30b
Reported by: Hans Potter Selasky <hps at selasky.org> [1]
- Make UUID support an option (enabled by default, no functional
change in default port)
- Mark conflict on UUID option with ossp-uuid port, since asterisk
requires misc/e2fsprogs-libuuid for this functionality and will not
build if the former is installed.
Please note that when compiling without UUID support the res_rtp
module in asterisk will have reduced functionality, so it is suggested
to keep the option turned on.
PR: 195249
Submitted by: blacktux82 at gmail.com
- Update net/asterisk to 1.8.32.0
- Update net/asterisk11 to 11.14.0
- Allow customizing startup options used by rc script [1]
- While here, fix some rclint warnings
Reported/Requested by: Emmanuel Coulon <silicium at orange.fr> [1]
Replace USE_AUTOTOOLS=libltdl with an ordinary LIB_DEPENDS in all ports.
There are only 60 such ports so there doesn't need to be a separate
keyword or USES for this.
Approved by: portmgr (bapt)
comms/spandsp-devel:
- Fix installation of lib/libspandsp.so.2 (when patching configure.ac
almost all USE_AUTOTOOLS are needed)
- Replace CONFIGURE_ARGS with CPPFLAGS/LIBS
Reported by: antoine
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
- Switch comms/spandsp-devel to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed
- Use install-strip target instead of STRIP_CMD
- Add/fix libspandsp.so versions in LIB_DEPENDS to differentiate between spandsp
and spandsp-devel
Approved by: portmgr blanket
net/openldap24-*:
- Convert to USES=libtool and bump dependent ports
- Avoid USE_AUTOTOOLS
- Don't use PTHREAD_LIBS
- Use MAKE_CMD
databases/glom:
- Drop :keepla
- Add INSTALL_TARGET=install-strip
databases/libgda4* databases/libgda5*:
- Convert to USES=libtool and bump dependent ports
- USES=tar:xz
- Use INSTALL_TARGET=install-strip
- Use @sample
(Only the first 15 lines of the commit message are shown above )
Convert GMAKE to MAKE_CMD
Please note that lots of invocation of MAKE_CMD here are wrong as they do not
properly respect MAKE_ENV and friends
With hat: portmgr
Replace lang/lua with the new lang/lua51
lang/lua51 is working the same way lang/lua52, chase ports using lua 5.1
Make the default lua lua52
Make all lua ports using USES=lua
Approved by: portmgr (implicit)
Fix unixODBC vs libiodbc conflicts
Always rely on unixODBC each time a port is looking for libodbc.so
Remove odbc compat from libiodbc
This allows to install both kde and gnome at the same time
While here:
- Convert libiodbc to USES=libtool
- Convert a bunch of libiodbc dependencies to USES=libtool
- Chase libiodbc.so shlib change
- Stagify some ports
- Convert some ports to USES=pgsql
Discussed with: rakuco (kde)
With hat: portmgr
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
(Only the first 15 lines of the commit message are shown above )
- Update to 11.8.1
- set USE_GCC as asterisk uses gcc extensions
(STAGE support will follow soon, just wanted to get the new version out now)
Security: 03159886-a8a3-11e3-8f36-0025905a4771
MFH: 2014Q1
- Update net/aserisk to 1.8.25.0
- Update net/aserisk10 to 10.12.4
- Update net/aserisk11 to 11.7.0
- mark net/aserisk10 DEPRECATED, it has reached its EOL
Security: 0c39bafc-6771-11e3-868f-0025905a4771
- Don't force gcc, make this work with clang, too [1]
- Don't call gmake directly [1]
- Make the -p (Run as pseudo-realtime thread) work on FreeBSD [1]
- Use @dirrmtry for directories that can contain files after deinstall
- Fix build of guid_uuid.c [2]
PR: ports/180233 [2]
Submitted by: tijl [1]
Kurt Jaeger <fbsd-ports@opsec.eu> [2]
- create missing directories before chowning them [1]
- asterisk depends on gmake so use gmake to run the menuselect.makeopts
target [1]
- disable res_timing_kqueue module until we can figure out what's wrong
with it [2]
Submitted by: John Marino <draco@marino.st> [1]
Reported by: Ian FREISLICH <ianf@clue.co.za>, [2]
Alejandro Imass <ait@p2ee.org>, [2]
Amr Elsharqawi <aelsharqawi@live.com> [2]
- update net/asterisk to 1.8.21.0
- update net/asterisk11 to 11.3.0
- add -F to command_args in the rc script, this ensures that asterisk
detaches from the controlling terminal. It was possible for the asterisk
rc script to prevent a box from reaching full multiuser if e.g. -v was
passed to command_args. [1]
Reported by: Kurt Lidl <lidl@pix.net>
Convert USE_BISON to USES= bison
It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build
it brings bison as a run dependency in case it is set the following way:
USES= bison:run
it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both
While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix
