net/dictd: Update to 1.13.3

Changes:	https://github.com/cheusov/dictd/blob/dictd-1.13/NEWS

net/dictd: Update to 1.13.2

Changes:	https://github.com/cheusov/dictd/blob/dictd-1.13/NEWS

*/*: Remove GNU_CONFIGURE_MANPREFIX=${PREFIX}/share after
9fd7ee1cdf6cbd5528159b58a966e1a40e2909a9

net/dictd: Update WWW and clean up pkg-descr

net/dictd: Update manpage location (003a571d1d6585196545295efc181514f171c4c4,
r523104)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

net: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ports@c0decafe.net>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Adam Jette <jettea46@yahoo.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Bakhtin <Alex.Bakhtin@gmail.com>
  *  Alex Deiter <Alex.Deiter@Gmail.COM>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>

net/dictd: Update to 1.13.1

Changes:	https://github.com/cheusov/dictd/blob/master/doc/NEWS

net/dictd: Do not mention net/dictd-database in pkg-message

net/dictd-database is gone since 13d4527a34237c3848 (2019).

Approved by:	portmgr (blanket)

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

Update to 1.13.0

- Update WWW

Changes:	https://github.com/cheusov/dictd/blob/master/NEWS

Convert to UCL & cleanup pkg-message (categories n)

(and missed 3 missed files from previous categories.)

Update to 1.4.1

- Change MASTER_SITES from SF to GitHub
- Update LICENSE
- Use PLIST
- Update WWW
- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://github.com/cheusov/libmaa/blob/master/doc/NEWS

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

- Add LICENSE_FILE
- Use USES=localbase

- Remove unrecognized CONFIGURE_ARGS
- Cosmetic change
- Do not silence installation message
- Reformat pkg-descr
- Add sourceforge to WWW
- Take maintainership

Reset maintainership:
- Lots of maintainers timeout
- unresponsive for almost a year

PR:		195059

- Switch to USES=libtool:build
- Use @sample

- Add LICENSE

Approved by:	portmgr (blanket)

- Support staging
- Convert USE_GMAKE to USES
- Use new LIB_DEPENDS syntax
- Switch to USES=libtool

Add NO_STAGE all over the place in preparation for the staging support (cat:
net)

- Update to 1.12.1

Convert USE_BISON to USES= bison

It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build

it brings bison as a run dependency in case it is set the following way:
USES= bison:run

it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both

While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix

In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().

In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.

The vast majority of pkg-descr files had the following format when they
had both lines:

Author: ...
WWW: ....

So standardize on that, and move them to the end of the file when necessary.

Also fix some more whitespace, and remove more "signature tags" of varying
forms, like -- name, etc.

s/AUTHOR/Author/

A few other various formatting issues

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Bump PORTREVISION for devel/libmaa shlib change

- Update to 1.12.0

Sync to new bsd.autotools.mk

Begin the process of deprecating sysutils/rc_subr by
s#. %%RC_SUBR%%#. /etc/rc.subr#

- use $SUB_FILES to dynamically adjust dictd.conf

PR:             ports/143101
Submitted by:   Sevan Janiyan <venture37_AT_geeklan dot co dot uk>

- Update to 1.11.2

PR:             ports/141451
Submitted by:   Sunpoet Po-Chuan Hsieh <sunpoet_AT_sunpoet dot net>

- Bump PORTREVISION to chase the update of libmaa

- Switch SourceForge ports to the new File Release System: categories starting
with N

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- Update to 1.11.1

- Update to 1.11.0

PR:             ports/130155
Submitted by:   Sunpoet Po-Chuan Hsieh <sunpoet_AT_sunpoet dot net>

- Update to 1.10.11

- Update to 1.10.10

Migration from bison 1.x to 2.x

PR:             117086
Tested by:      -exp runs

- Update to 1.10.9

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Update to 1.10.8
- maintain it for a while

dd@ has had his port bit taken for safekeeping.  Therefore, return these
to the pool.

Hat:            portmgr

Remove zero-sized files.

[PATCH] net/dictd: convert to USE_RC_SUBR=dictd.sh and small fixes

        - USE_RC_SUBR= yes  -->  USE_RC_SUBR= ${PORTNAME}.sh
        - move files/dictd.sh  --> files/dictd.sh.in
        - default to NO for dictd_enable
        - Move pkg-message to files/pkg-message.in and print local path to
net/dictd-database

PR:             ports/91505
Submitted by:   Ion-Mihai "IOnut" Tetcu <itetcu@gmail.com>
Reviewed by:    maintainer timeout

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Remove the FreeBSD KEYWORD from all rc.d scripts where it appears.
We have not checked for this KEYWORD for a long time now, so this
is a complete noop, and thus no PORTREVISION bump. Removing it at
this point is mostly for pedantic reasons, and partly to avoid
perpetuating this anachronism by copy and paste to future scripts.

SHA256ify

Approved by: krion@

Don't create the data directory that we no longer use. Nothing was
installed into it, and it was no longer being deleted in the plist, so
it would remain after deinstallation.

Problem reported by:    botkris
Submitted by:           Andy Miller

Upgrade to 1.10.14

Submitted by:   Andy Miller

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Pacify distfile survey by following redirects on URLs.

Source:         distfile survey

Unbreak on 4.x by using the the iswspace__ wrapper (4.x doesn't have a
native iswspace). Patch has been submitted to the maintainers (SF
#1228054).

Submitted by:   Andy Miller <andy@trit.org>

Upgrade to 1.10.1. Drop the dependency on ltdl; the client never used
it, and the server seems to work okay with the native implementation.
The patch to libmaa/decl.h is no longer necessary because the
distribution already includes that test (the other libmaa patches still
apply--I'm not sure that they're really necessary any more, but they
don't hurt).

Upgrade to 1.9.15

Submitted by:   Andy Miller <andy@trit.org>

The new rcNG dictd.sh doesn't start dictd by default (without the
appropriate rc.conf entry), so tell users how to turn it on. Similar
reminders exist in many other ports.

Submitted by:   Andy Miller
Approved by:    portmgr (linimon)

Upgrade to 1.9.14

Submitted by:   Andy Miller <andy@trit.org>

Argh! I forgot this one 2 days ago.

Really support rc.subr on RELENG_4.

Pointy hat to:  myself

+ Embrace rcNG. (1)
+ Only install default configuration file if it does not exist. (2)

PR:             ports/70390 (2)
Submitted by:   Andy Miller via MAINTAINER <dd at FreeBSD dot org> (1)
                Dryice Liu <dryice at liu dot com dot cn> (2)
Approved by:    MAINTAINER timeout.

Sync with new bsd.autotools.mk

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Upgrade to 1.9.11

Submitted by:   Andy Miller <andym@trit.org>

Make start/stop messages consistent with other ports.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

SIZEify.

Avoid trying to build lstat.o since we have lstat in libc.

Put C*FLAGS into CONFIGURE_ENV instead of assigning it directly.  This
allows configure-run test programs to find the right include files and
libraries.

Breakage reported by:   many
Fix submitted by:       adamw

Upgrade to 1.9.7.

PR:             57809
Submitted by:   Cheng-Lung Sung <clsung@dragon2.net>

libtool uber-patch

* kill devel/libtool and move to devel/libtool13, upgrading to 1.3.5
* upgrade repo-copied devel/libtool14 to 1.4.3
* break out libltdl into its own separate port
* move to version-numbered binaries/scripts (ie: there is *no* 'libtool'
  any more -- USE_LIBTOOL and USE_LIBTOOL_VER are your friends)

Approved by:    portmgr (kris) - for the bsd.port.mk hooks
Tested by:      bento 4-exp builds (repeatedly)

1. include <osreldate.h> before use macro __FreeBSD_version
2. unbreak chinese/dictd which is the slave port of net/dictd

PR:             48586
Submitted by:   Kuang-che Wu <kcwu@kcwu.dyndns.org>
Approved by:    maintainer timeout

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Fix build on sparc64 (all the world's not sunos, solaris or linnex)

Break UTF8 support on pre-5.x systems which don't implement wctype.h.

Submitted by:   dd, roam
Approved by:    steve

Upgrade to 1.8.0.  patch-servparse.y has been submitted to the
maintainers.

Escape parenthese in regular expressions to appease a sed that doesn't
understand extended regexps.

Convert to use REINPLACE_CMD instead of PERL and remove USE_PERL5.

Conditionalize MAINTAINER for the benefit of slave ports.

for slave ports

Bump PORTREVISION. Now dictd is not a dmesg(8) output spammer.

Do not fclose(3) a NULL stream. I bet no one will want his dmesg(8) output
to be spammed by
...
pid 12345 (dictd), uid 54321: exited on signal 11
pid 23456 (dictd), uid 54321: exited on signal 11
pid 34567 (dictd), uid 54321: exited on signal 11
...

I'll look after this.

upgrade to 1.7.1
drop maintainership

The regexp used to change T_USER to T_USERNAME only works if the
symbol is preceded by whitespace.  However, on line 64 of servscan.l,
the symbol is preceded by a parenthesis, so it is left alone.  On
i386, T_USER is defined, so the build proceeds, but there may still be
adverse side effects due to that routine returning the wrong thing in
some cases.  The bandaid is to fix the regexp to catch the case where
T_USER is used after a parenthesis--this is what's being committed.  The
real fix is either to make the author use T_USERNAME for us, or,
preferably, don't define T_USER when sys/param.h is included since
T_USER is in the application namespace.

Approved by:    maintainer timeout

typo, delvis -> devils    

use system zlib    

${PREFIX}/share/${PORTNAME} --> ${DATADIR}    

o Swap dependency. Now dictd-database needs dictzip to be built. One of its    
dictionary file isn't shipped with .dz format.    

o Follows dictionary files addition of dictd-database port   o Now use our own
dictd.conf    

o Fix pkg-comment, this port only contains dict server   o Fix pkg-message, dict
client is right at textproc/dict   o Add missing pkg-plist entry   o Really
destroy T_USER conflicts. *SIGH*   o Fix dictd.sh startup script. Dictd itself
won't generate     any pid file. Thus I use my own trick.    

Arrrg ! I forgot to commit these 2 files.    

o Properly use wait3(2)   o Portlint   o Resolve T_USER conflicts (trap.h in
base system)   o Properly handle CFLAGS   o Add net/dictd-database as
RUN_DEPENDS   o Bump PORTREVISION    

remove redundant substitution    

add dictd, dict protocol (RFC 2229) server