===> The following configuration options are available for freeswitch-core-devel-1.2.3_3:
REBOOTSTRAP=on: Rebootstrap freeswitch build
MODABSTRACTION=on: Simplify/Standarize API
MODAVMD=on: Detects voicemail generalized approach
MODCALLCENTER=on: Call queuing application
MODCIDLOOKUP=on: Lookup CID via database, url
MODBLACKLIST=on: Blacklisk phone numbers
MODCURL=on: Allows scripts to make HTTP requests
MODDISTRIBUTOR=on: Simple round-robin style distributions
MODEASYROUTE=on: DID Database lookup
MODFSK=on: FSK (Frequency-Shift Keying) data transfer
MODHTTAPI=on: HTTP API
MODHTTPCACHE=on: HTTP GET with caching
MODDIRECTORY=on: Dial by name directory
MODLADSPA=on: use Auto-tune on your call
MODLCR=on: Least Cost Routing
MODMEMCACHE=on: Memcached API
MODNIBBLEBILL=on: Billing Module
MODRSS=on: RSS feed text to speech
MODSNOM=on: Controlling softkeys on Snom phones
MODSPY=on: Extension/Call Spy tool
MODSOUNDTOUCH=off: Pitch shifting audio effects
MODSTRESS=off: Detect Stress in voice
MODSNAPSHOT=off: Audio/Disk Snapshot Tool
MODVMD=on: Voicemail Beep Detection
MODVOICEMAILIVR=on: IVR Based Voicemail(NEW)
MODAMRWB=on: GSM-AMRWB (ARM Wide Band) codec
MODCELT=on: Celt ultra-low delay audio codec
MODCODEC2=on: Freeswitch Codec2 Module
MODILBC=on: ILBX Codec
MODISAC=on: Isac Codec (New Codec)
MODOPUS=on: OPUS ultra-low delay audio codec
MODSILK=off: Skype Silk Codec (Broken/BUILD ISSUES)
MODSIREN=on: Siren Codec
MODDPASTERISK=off: Asterisk Dialplan (Old School Dialplan)
MODDPDIRECTORY=on: obtain dialplan from a directory resource
MODDINGALING=on: Jabber/Google Talk integration module
MODFREETDM=off: Interface to Zaptel hardware End Points
MODPORTAUDIO=on: Portaudio API
MODRTMP=on: Real time media protocol
MODSKINNY=on: Skinny/SCCP
MODFLITE=on: Free open source Text to Speech
MODPOCKETSPHINX=on: Free open source Speech Recognition
MODTTSCMDLINE=on: Play Sounds via commandline
MODUNIMRCP=on: Open MRCP implementation ASR/Text
MODCDRPGCSV=off: Asterisk Compatible CDR PostgreSQL
MODERLANGEVENT=off: send/receive events/commands in Erlang
MODMULTICAST=on: Broadcasts events to netmask
MODEVENTZMQ=on: Zeroconf config socket
MODSNMP=off: SNMP AgentX module
MODVLC=off: Play local mp3 files any rate(NEW Testing)
MODPASTREAM=on: PortAudio Streaming Module
MODSHELLSTREAM=on: Stream audio via shell command
MODSHOUT=off: Play local mp3/shoutcast (Build Error)
MODMANAGED=off: Common Language Infrastructure API
MODPERL=on: Perl Lang Support
MODPYTHON=on: Python Lang Suppot
MODPOSIXTIMER=on: Posix timer (New/Testing)
MODXMLCURL=on: XML dynamically control of FreeSWITCH
MODXMLODBC=on: XML ODBC Module
MODXMLRPC=on: XML Remote Procedure Calls
MODSAYDE=off: German Voice Prompts
MODSAYES=off: Spanish Voice Prompts
MODSAYEN=on: English Voice Prompts
MODSAYFR=off: French Voice Prompts
MODSAYHE=off: Hebrew Voice Prompts
MODSAYHU=off: Hungarian Voice Propmts
MODSAYIT=off: Italian Voice Propmts
MODSAYNL=off: Dutch Voice Propmts
MODSAYPT=off: Portuguese Voice Propmts
MODSAYRU=off: Russian Voice Propmts
MODSAYTH=off: Thai Voice Propmts
MODSAYZH=off: Chinese Voice Propmts
===> Use 'make config' to modify these settings
Remove 4 (mostly) unstaged freeswitch ports
The audio/freeswitch-music port was actually staged, but it lost its
purpose after the other 3 ports supporting the development version of
FreeSwitch were removed due to lack of maintenance and staging.
Berkeley DB cleanup, remove versions 4.0 ... 4.7.
- Mk/bsd.database.mk rewrite, new default to db5.
- db6 is eligible by default only if installed on the system.
- Bump PORTREVISION of all ports that directly depend on BerkeleyDB or
where USE_BDB is found in the port's directory
- Patch a few ports such that they will pick up or work with newer
versions.
- Add UPDATING entry
- Drive-by format fix for pks
- Drop BerkeleyDB option from mail/popular for now, requires more work.
- Exp-run logs linked from the PR below.
- Ports that do not build (IGNORE, BROKEN, etc.) have pro-forma changes
for new Berkeley DB, but are untested.
NOTE: please read UPDATING and the Wiki page before proceeding!
Announcement: http://lists.freebsd.org/pipermail/freebsd-ports-announce/2014-August/000090.html
Wiki reference: https://wiki.freebsd.org/Ports/BerkeleyDBCleanup
PR: 192690
Approved by: portmgr (implicit, PORTREVISION bump on unstaged ports)
Support LIBS like LDFLAGS.
- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS. Also remove references to
PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
required additional patches.
Somewhat simplified a linker command line looks like:
${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}
where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us. If possible -L and -l flags need to be
(Only the first 15 lines of the commit message are shown above )
Convert USE_BISON to USES= bison
It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build
it brings bison as a run dependency in case it is set the following way:
USES= bison:run
it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both
While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix
- Remove hard coded sleep [1]
- Make the "sofia recover" only run if you've set freeswitch_cluster so it
doesn't break the ability to start the daemon [1]
- Bump PORTREVISION
- Mark MAKE_JOBS_UNSAFE due to failures building it with FORCE_MAKE_JOBS
PR: ports/175305 [1]
Submitted by: Mark Felder <feld@feld.me> [1]
Force numerous ports that fail to build with clang over to instead always
rely on gcc. The patch uses the new USE_GCC=any code in Mk/bsd.gcc.mk to
accomplish this.
The ports chosen were ports that blocked 2 or more ports from building with
clang. (There are several hundred other ports that still fail to build with
clang, even with this patch. This is merely one step along the way.)
Those interested in fixing these ports with clang, and have clang as their
default compiler, can simply set FORCE_BASE_CC_FOR_TESTING=yes.
For those who have gcc as their default compiler, this change is believed
to cause no change.
Hat: portmgr
Tested with: multiple runs on amd64-8-exp-bcm and 9-exp-clang, with various
combinations of patch/no-patch and flag settings.
Patch ports depending on lang/erlang-lite to use lang/erlang instead.
The current lang/erlang option defaults match those specified in
lang/erlang-lite, thus making it redundant. Also, mixing ports
depending on lang/erlang and lang/erlang-lite is impossible without
manual patching.
Hence, lang/erlang-lite is going to be removed.
new devel/pkgconf added to replace devel/pkg-config. new version of pkg-config
are no more self hosting so we are stuck with 0.25 version while pkgconf provide
the same set of features as 0.27 and a compatible frontend. A symlink to
pkg-config has been added for convenience and compatibility
This also introduces a new macro to use pkgconf in your ports:
USE_PKGCONFIG
it can take the following arguments:
- yes (meaning build only dep)
- build (meaning build only dep)
- run (meaning run only dep)
- both (meaning run and build dep)
From now USE_GNOME= pkgconfig is deprecated in favour of USE_PKGCONFIG
The old gnome macro has been modified to use pkgconf but still the sameway: run
and build dep to avoid large breakage.
While here fix some ports relying on pkg-config but not specifying it, fix some
ports broken because testing wrong .pc files, and fix ports using pkg-config
--version to determine pkg-config version instead of
pkg-config --modversion pkg-config like recommanded by pkg-config
With Hat: portmgr
Exp-runs by: bapt (pointhat-west), beat (pointyhat)
Add configuration ports for freeswitch-devel; vanilla, sbc, insideout and curl
PR: ports/167877
PR: ports/167878
PR: ports/167879
PR: ports/167881
Submitted by: Richard Neese (r.neese@gmail.com) (maintainer)
Fix some minor pkg-install script issues in -core-devel
Use a cookie file to install ETCDIR/conf directory structure rather than
@exec mkdir to simplify installation
Add net/freeswitch-core-devel port; version 1.2 for testing.
Register CONFLICTS with net/freeswitch-core
PR: ports/167872
Submitted by: Richard Neese <r.neese@gmail.com>