| Port details |
- p5-Net-Subnet Fast IP-in-subnet matcher for IPv4 and IPv6, CIDR or mask
- 1.03_1 net
 =2      1.03_1Version of this port present on the latest quarterly branch. - Maintainer: perl@FreeBSD.org
- Port Added: 2011-10-26 11:08:28
- Last Update: 2022-09-07 21:58:51
- Commit Hash: fb16dfe
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: perl5
- License: ART10
- WWW:
- https://metacpan.org/release/Net-Subnet
- Description:
- This is a simple but fast pure Perl module for determining whether a given IP
address is in a given set of IP subnets. It's iterative, and it doesn't use any
fancy tries, but because it uses simple bitwise operations on strings it's still
very fast.
All documented functions are exported by default.
Subnets have to be given in "address/mask" or "address/length" (CIDR) format.
The Socket and Socket6 modules are used to normalise addresses, which means that
any of the address formats supported by inet_aton and inet_pton can be used with
Net::Subnet.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- p5-Net-Subnet>0:net/p5-Net-Subnet
- To install the port:
- cd /usr/ports/net/p5-Net-Subnet/ && make install clean
- To add the package, run one of these commands:
- pkg install net/p5-Net-Subnet
- pkg install p5-Net-Subnet
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: p5-Net-Subnet
- Flavors: there is no flavor information for this port.
- distinfo:
- SHA256 (Net-Subnet-1.03.tar.gz) = 125e6db64c98026439f9b585115f94f42315a31d8f16ca63d0c939ab66019afa
SIZE (Net-Subnet-1.03.tar.gz) = 4305
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- p5-Socket6>=0.23 : net/p5-Socket6
- perl5>=5.32.r0<5.33 : lang/perl5.32
- perl5>=5.32.r0<5.33 : lang/perl5.32
- Runtime dependencies:
-
- p5-Socket6>=0.23 : net/p5-Socket6
- perl5>=5.32.r0<5.33 : lang/perl5.32
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- net_p5-Net-Subnet
- USES:
- perl5
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
07 Sep 2022 21:58:51
 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
1.03_1
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
1.03_1
20 Jul 2022 14:22:37
|
Tobias C. Berner (tcberner) |
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com> (Only the first 15 lines of the commit message are shown above ) |
1.03_1
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
1.03_1
06 Oct 2018 13:06:45
 |
des |
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw) |
1.03_1
27 May 2018 20:15:20
|
sunpoet |
Update WWW
search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.
With hat: perl |
1.03_1
01 Apr 2016 14:16:20
|
mat |
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight |
1.03_1
26 Nov 2014 13:08:38
|
mat |
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above ) |
1.03
05 Nov 2013 16:42:56
|
vanilla |
Support STAGEDIR. |
1.03
20 Sep 2013 22:10:25
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
net) |
1.03
02 Aug 2013 18:52:11
|
mat |
- Convert to new perl framework
- Trim Makefile header
- Remove MAKE_JOBS_SAFE=yes, it's the default. |
1.03
03 Jun 2013 14:06:43
|
tobez |
Update to 1.03.
Changes: http://search.cpan.org/dist/Net-Subnet/Changes |
1.02
26 Oct 2011 11:08:03
|
sunpoet |
- Add p5-Net-Subnet 1.02
This is a simple but fast pure Perl module for determining whether a given IP
address is in a given set of IP subnets. It's iterative, and it doesn't use any
fancy tries, but because it uses simple bitwise operations on strings it's still
very fast.
All documented functions are exported by default.
Subnets have to be given in "address/mask" or "address/length" (CIDR) format.
The Socket and Socket6 modules are used to normalise addresses, which means that
any of the address formats supported by inet_aton and inet_pton can be used with
Net::Subnet.
WWW: http://search.cpan.org/dist/Net-Subnet/
PR: ports/161335
Submitted by: Henk van Oers <hvo.pm@xs4all.nl> |
As an Amazon Associate I earn from qualifying purchases.