Print binary sFlow feed to ASCII, or forward it to other collectors.
This tool receives sFlow data, and generates either a simple-to-parse
tagged-ASCII output, or binary output in tcpdump(1) format. It can also
generate Cisco NetFlow version 5 datagrams and send them to a destination
UDP host:port, or forward the original sFlow feed to a number of
additional collectors.
===> The following configuration options are available for sflowtool-6.10:
DOCS=on: Build and/or install documentation
EXAMPLES=on: Build and/or install examples
===> Use 'make config' to modify these settings
*/*: Sunset 12.4-RELEASE/12-STABLE from ports tree
- Remove all references to defunct ARCH arm
- Remove all references to defunct ARCH sparc64
- Remove x11-drivers/xf86-video-sunffb which requires defunct sparc64
ARCH
- Remove sysutils/afbinit requires defunct sparc64 ARCH
- Remove all references to bktr driver
- Remove all references to defunct FreeBSD_12
- Remove all references to OSVERSION/OSREL corresponding to 12
- Remove conditionals in Mk/Uses/cabal.mk
- Remove sparc reference from Mk/Uses/qt-dist.mk
- Remove BROKEN_sparc64/NOT_FOR_ARCH=sparc64
- Remove BROKEN_FreeBSD_12* from:
- Remove OpenSSL patches from:
- Remove conditional flags for OSVERSION >= 1300000 to fixed flags.
Also move conditional flags for non sparc64/arm ARCH to fixed flags.
Reviewed by: brooks, jbeich, rene, salvadore
Differential Revision: https://reviews.freebsd.org/D42068
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
(Only the first 15 lines of the commit message are shown above )
Github cleanup.
- Use the version tag instead of commit hash when they're the same.
- Remove unnneeded variables.
- Simplify go- ports when possible.
- Various fixes.
Sponsored by: Absolight
- update to 3.30
Changelog:
Oct-18-2013:
3.30 - exit if printf() fails. Important for detecting streaming errors.
Thanks to Nick Hilliard.
- add tunnel structures (http://sflow.org/sflow_tunnels.txt)
PR: ports/183218
Submitted by: Nick Hilliard <nick@foobar.org>
- update to version 3.29
- add stage support
Changes 2013-10-02:
3.29 - added decode for nat_port structure
- include intypes.h for PRIu64 etc.
- minor bugfixes - thanks to Rowan Thorpe
In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().
In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.
- update to version 3.17
- take maintainer
I got OK from old maintainer per PM
PR: 153311
Submitted by: ohauer
Approved by: Gregory Edigarov <greg _at_ bestnet.kharkov.ua> (old maintainer)
Fix a few "bad example" problems in the rc.d scripts that have been
propogated by copy and paste.
1. Primarily the "empty variable" default assignment, which is mostly
${name}_flags="", but fix a few others as well.
2. Where they are not already documented, add the existence of the _flags
(or other deleted empties) option to the comments, and in some cases add
comments from scratch.
3. Replace things that look like:
prefix=%%PREFIX%%
command=${prefix}/sbin/foo
to just use %%PREFIX%%. In many cases the $prefix variable is only used
once, and in some cases it is not used at all.
4. In a few cases remove ${name}_flags from command_args
5. Remove a long-stale comment about putting the port's rc.d script in
/etc/rc.d (which is no longer necessary).
No PORTREVISION bumps because all of these changes are noops.
This tool receives sFlow data, and generates either a simple-to-parse
tagged-ASCII output, or binary output in tcpdump(1) format. It can also generate
Cisco NetFlow version 5 datagrams and send them to a destination UDP host:port.
PR: 94481
Submitted by: Gregory Edigarov <greg@velcom.com>
