cleanup: Remove expired ports:

2022-01-01 astro/google-earth: Needs newer version to connect to server
2022-01-01 net/tramp: Not updated in 5 years and now part of Emacs
2022-01-01 archivers/p7zip-codec-rar: Unmaintained for years and has known
vulnerabilities

net/tramp: Mark BROKEN and set EXPIRATION_DATE

Issues:

- There have been about a dozen new releases, but the port has not been
  updated in about five years.

- There are plist problems related to gvfs detection.

USES=emacs: Chase package name changes

PR:		259259
Differential Revision:	https://reviews.freebsd.org/D32613

*: re-assign kuriyama@s ports to the pool, commit bit safekept

With hat:	portmgr-secretary

net/tramp: unbreak

net/tramp: Work around plist issue on 13.0 with devel_full flavor

Detection of gvfs fails with this combination.

*: Chase new major version (29) of editors/emacs-devel

Differential Revision:	https://reviews.freebsd.org/D32258

Remove # $FreeBSD$ from Makefiles.

editors/emacs: Update to 27.2

This is a bug-fix release with no new features.

https://www.gnu.org/software/emacs/news/NEWS.27.2

Reviewed by:	ashish
Differential Revision:	https://reviews.freebsd.org/D27700

editors/emacs: Update to version 27.1

Please refer to the 20200811 UPDATING entry when upgrading
dependent (*-emacs26-*) ports.

Port changes:

- depend on math/gmp
- match upstream by turning CAIRO, HARFBUZZ, and JSON options and on and
  turning MAGICK off by default
- remove OPENMP check for graphics/ImageMagick as the openmp is now
  included in base
- update EMACS_VER in Mk/Uses/emacs.mk
- bump USES=emacs ports or remove BROKEN for net-im/jabber.el and
  deskutils/howm, which now build

Submitted by:	HIROSE Yuuji <yuuji@gentei.org> (canna patch)
Reviewed by:	ashish
Differential Revision:	https://reviews.freebsd.org/D23966

editors/emacs-devel: Update to latest master branch commit, 4f2b415

This update includes an Emacs major version change from 27.0.50 to 28.0.50.
Ports that may depend on editors/emacs-devel must chase this update
with a PORTREVISION bump.

Submitted by:	ashish (maintainer)
Differential Revision:	https://reviews.freebsd.org/D23012

Bump PORTREVISION for more ports using EMACS_VERSION_SITE_LISPDIR

This is required after editors/emacs was updated to version 26.3 in
r510281.  Some of these ports were missed in r510696.

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

USES=emacs ports: Bump PORTREVISION for editors/emacs 26.1 upgrade

Or, mark ports that fail to build as BROKEN.
https://lists.freebsd.org/pipermail/freebsd-ports/2018-May/113518.html

Flavorize and modernize Emacs ports

- Convert USE_EMACS to USES=emacs
- Remove editors/emacs-nox11 (refer to nox flavors of editors/emacs and
  editors/emacs-devel)
- Permit default Emacs flavor to be specified in make.conf
- Rename japanese/migemo-emacs23 to japanese/migemo-emacs
- Update and simplify audio/emms and fix build on FreeBSD 10 [1]
- Update databases/bbdd and fix build on FreeBSD 10 [1]
- Update editors/emacs-devel
- Ensure Makefile shell commands that change directory are executed in a
  subshell
- Silence some portlint warnings

[1] By not depending on base texinfo

PR:		225404
Reviewed by:	antoine
Approved by:	portmgr (mat) ashish (maintainer)
Differential Revision:	https://reviews.freebsd.org/D13506

Bump PORTREVISION for renamed info file in r457383.

- Replace a patch for configure.ac with a post-patch command for
  configure so USE_AUTOTOOLS can be removed.
- Remove obsolete references to --with-contrib, --with-japanese-manual
  and emacs20.
- Remove 21 from tramp21.info (old version?).

Chase Emacs update

Chase editors/emacs update to version 25.2

Reported by:	des
Approved by:	ashish (emacs maintainer), swills (mentor, implicit)
Differential Revision:	https://reviews.freebsd.org/D10534

- Upgrade to 2.3.0.

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

- Chase GNU Emacs updates

PR:		199553

net/tramp: add CPE information

- Maintainer's timeout (kuriyama@FreeBSD.org)

PR:		198839
Submitted by:	Shun <shun.fbsd.pr@dropcut.net>

Cleanup plist

- Chase GNU Emacs updates

PR:		194624

Allow to build with texinfo from ports

Convert GMAKE to MAKE_CMD
Please note that lots of invocation of MAKE_CMD here are wrong as they do not
properly respect MAKE_ENV and friends

With hat:	portmgr

- Stagify.

- Convert gmake,bzip2 to USES

Approved by:	portmgr

Add NO_STAGE all over the place in preparation for the staging support (cat:
net)

- Upgrade to 2.2.7.

GNU Emacs updates

editors/emacs:
 - Update to 24.3
 - Update CANNA patchset[1]
 - Unbreak ARM support by using the patch from emacs-devel port
 - Add missing INSTALLS_ICONS[2]
 - Remove a patch which is already integrated upstream
 - Fix Makefile header

editors/emacs-devel:
 - Update to bzr revision 112178
 - Fix Makefile header
 - Add missing INSTALLS_ICONS[2]

- Upgrade to 2.2.6.

Chase Emacs updates

- Bump PORTREVISION to chase Emacs port updates
- Unbreak INDEX caused by databases/lsdb, editors/flim, and editors/semi

- Upgrade to 2.2.5.

- update png to 1.5.10

- Upgrade to 2.2.4.

Feature safe:   yes

- Chase Emacs updates

PR:             ports/165082

- Upgrade to 2.2.3.

Feature safe:   yes

- Chase editors/emacs update

Chase editors/emacs update

Chase editors/emacs update.

PR:             ports/160196

- Upgrade to 2.2.1.

Sync to new bsd.autotools.mk

- Upgrade to 2.2.0.

Punt autoconf267->autoconf268

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

- Upgrade to 2.1.19.

- Upgrade to 2.1.18.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Changes to editors/emacs and Mk/bsd.emacs.mk were taken from
PR/137956 by Ashish SHUKLA (thanks!).  [1]

Those ports which define EMACS_PORT_NAME to be "emacs21" were
not touched (this time). They may be converted to the new
world order by removing the above mentioned assignment.

Four ports were marked as BROKEN with EMACS_PORT_NAME=emacs23
(they do not compile):
. lang/bigloo;
. mail/wanderlust;
. mail/wanderlust-devel;
. www/emacs-w3m.

Three ports were marked as IGNORE with EMACS_PORT_NAME=emacs23:

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Upgrade to 2.1.16.

Upgrade to 2.1.15.

- Remove empty files

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

- emacs22 and later has stock tramp.info (but little older version) and
  it conflicts with port-installed tramp.info.  So install here as
  tramp21.info to unbreak packaging.

- Upgrade to 2.1.12.
- Don't use EMACS_PORT_NAME?=emacs21

Submitted by:   "Douglas K. Rand" <rand@meridian-enviro.com>
PR:             ports/121604 (part of)

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

Fix installation with xorg 7.2.

PR:             ports/113082
Submitted by:   NAKAJI Hiroyuki <nakaji@jp.freebsd.org>

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Upgrade to 2.1.7.
- Add a patch to ignore completion-mode check because in my environment,
  this check prevents completion in some situation.

- Unbreak by avoiding overwrite of $PREFIX/info/dir.

Thanks to:      kris

Grab maintainership and try to investigate this breakage.

Schedule these broken ports for termination on 2006-12-01

Mark broken: removes files not belonging to it on deinstall.

Update port from version 2.1.4 to version 2.1.6

PR:             ports/99782
Submitted by:   Toni Schmidbauer

 - Fix possibility of "infinite make fork" when "Registering install for ..."
   EMACS ports.  [1]

 - Allow building a port as root using an NFS-mounted /usr/ports if the
   server maps root to a UID other than root. [2]

 - Make 'BROKEN' and 'IGNORED' ports exit their "make install" with a fail
   status rather than success. [3]

 - Improve behavior when dealing with versioned dependencies. [4]

 - Fix false positives in check-conflicts target. [5]

 - Remove obsolete bzip2 code. [6]

- Add SHA256

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

- Update to 2.1.4

PR:             ports/88302
Submitted by:   Boris B. Samorodov <bsam@ipt.ru>

- Install INFO in a more standard fashion

Pacify distfile survey by following redirects on URLs.

Source:         distfile survey

install password.el unconditionally.

install password.el unconditionally.

- Update to 2.1.3

PR:             ports/77660
Submitted by:   NAKAJI Hiroyuki <nakaji@jp.freebsd.org>

- Update to 2.0.46

PR:             ports/75445
Submitted by:   Andrey Slusar <anray(at)inet.ua>

- Update to 2.0.45

PR:             ports/72590
Submitted by:   Andrey Slusar <anray@inet.ua> (maintainer)

- Update to 2.0.44

PR:             ports/72235
Submitted by:   Andrey Slusar <anray@inet.ua>

- Upgrade to 2.0.43 (2.0.41 didn't work on emacs-21.3 by using
  not existing function "copy-tree").
- Use autoconf-2.59 and regenerate configure script to avoid a bug in
  AC_CHECK_PROG(..., [$PATH:/]).

fix build of tramp-emacs20

Notified by:    Kris

Fix elisp error at connecting to remote site.

Obtained from:  tramp CVS

Update to 2.0.41
Drop my maintainership

SIZEify (maintainer timeout)

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

Chase up new MASTER_SITE_SAVANNAH.

PR:             ports/56970
Submitted by:   Jean-Yves Lefort <jylefort@brutele.be>

Don't call texi2dvi.

Submitted by:   Koji Mori <mori@tri.asanuma.co.jp>
Approved by:    portmgr

Update to 2.0.36.
Never to install japanese info (outdated, Now I'm working on it)
Don't install experimental files under tramp2/

PR:             ports/54438
Submitted by:   Kang-min Liu

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Update to 2.0.29

Update to 2.0.28

Update to 2.0.24

Fix mastersite.

Submitted by:   bento and portsurvey

Update to 2.0.15.
Master site has moved to savannah.

Update to 20020411.
Remove the patch (already applied in original distribution).

Update to 20020218.

Update to new distfile (20020130).   Require gmake.    

Update to new distfile (20020121).