Based on the work of rdesktop, xrdp uses the remote desktop protocol to
present a GUI to the user.
The goal of this project is to provide a fully functional Linux terminal
server, capable of accepting connections from rdesktop and Microsoft's own
terminal server / remote desktop clients.
Unlike Windows NT/2000/2003 server, xrdp will not display a Windows desktop
but an X window desktop to the user.
Xrdp uses Xvnc or X11rdp to manage the X session.
===> The following configuration options are available for xrdp-devel-0.10.80.b20260702_2,1:
DEBUG=off: Build with debugging support
FUSE=off: Enable drive redirection via FUSE (experimental)
IPV6=on: IPv6 protocol support
====> Options available for the group AUDIO_CODEC
FDKAAC=on: Enable Fraunhofer FDK AAC for audio redirection
MP3LAME=off: Enable MP3 Lame for audio redirection
OPUS=on: Enable Opus for audio redirection
====> Options available for the group VIDEO_CODEC
OPENH264=on: H.264 video codec support via OpenH264
X264=on: H.264 video codec support via x264
===> Use 'make config' to modify these settings
Reason:
The port has been updated to the latest development snapshot.
The directory for the config files has also changed from
PREFIX/etc/xrdp to PREFIX/etc/xrdp-devel to prevent incompatible config
files for net/xrdp and net/xrdp-devel from getting mixed up.
When updating net/xrdp-devel from old versions, move the config files to
the new directory.
Reason:
After xorg upgrade to 21.1.4, xorgxrdp session doesn't start as before
This is because bin/Xorg has been replaced with X server binary wrapper.
You must manually edit the Xorg section in etc/xrdp/sesman.ini to get it
working again.
The following is a short example of where, how to modify sesman.ini.
Make sure to replace LOCALBASE with your actual path.
[Xorg]
; Specify the path of non-suid Xorg executable. It might differ depending
; on your distribution and version. Find out the appropreate path for your
; environment. The typical path is known as follows:
;
; Fedora 26 or later : param=/usr/libexec/Xorg
; Debian 9 or later : param=/usr/lib/xorg/Xorg
; Ubuntu 16.04 or later : param=/usr/lib/xorg/Xorg
; Arch Linux : param=/usr/lib/Xorg
; CentOS 7 : param=/usr/bin/Xorg or param=Xorg
; CentOS 8 : param=/usr/libexec/Xorg
;
-param=Xorg
+param=LOCALBASE/libexec/Xorg
*/*: Bump multimedia/openh264 consumers after dc94e01
net/freerdp{,3} have been already bumped in e447cd0, so not being bumped
again.
Bumped by the following one-liner:
$ git grep -l libopenh264 | \
grep '^.*/.*/Makefile$'| \
xargs -t -n1 portedit bump-revision -i
Approved by: portmgr (blanket)
filesystems/fusefs-libs3: bump portrevision of dependent ports
Bump PORTREVISION of all ports depending on libfuse3.so after upgrade
to version 3.17.1.
Reported by: vvd
net/xrdp-devel: Update to 0.10.80.b20241229 4c8c773
While here,
- Change config file directory to PREFIX/etc/xrdp to
PREFIX/etc/xrdp-devel
- Pet portclippy
- Sort pkg-plist
net/xrdp-devel: Drop dependency on audio/pulseaudio-module-xrdp
as weell as net/xrdp to allow users to choose either PipeWire or
PulseAudio to meet environment.
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
(Only the first 15 lines of the commit message are shown above )
net/xrdp-devel: Update to 0.9.20.b20220329
The version number is tentative. Now -devel port has aupcoming new major
version.
Sponsored by: HAW International
*/*: Remove redundant '-[0-9]*' from CONFLICTS
The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").
Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".
Approved by: portmgr (blanket)
Remove expired ports:
2018-09-29 net/ntp-devel: Use net/ntp instead
2018-09-29 net/xrdp-devel: Use net/xrdp instead
2018-09-29 net/tigervnc-devel: Use net/tigervnc instead
2018-09-29 net/unison-devel: Use net/unison instead
2018-09-30 textproc/p5-IDNA-Punycode: Deprecated by upstream
2018-08-15 graphics/gnustep-slideshowkit: unknown license
2018-08-15 graphics/gnustep-slideshow: depends on expiring
graphics/gnustep-slideshowkit
2018-09-30 security/lockdown: Renders system unbootable
2018-09-30 devel/p5-Search-Binary: Deprecated by upstream, use
List::BinarySearch instead
2018-09-30 devel/p5-ExtUtils-Command: ExtUtils::Command has been re-incorporated
to ExtUtils-MakeMaker since 7.06, use devel/ExtUtils-MakeMaker instead
2018-09-30 editors/yui: Unmaintained upstream
2018-09-29 x11/tint-devel: Use x11/tint instead
net/xrdp-devel: re-add RUN_DEPENDS on x11-drivers/xorgxrdp
- re-add after the port we depend on has finally landed
PR: 216420
Submitted by: Koichiro IWAO <meta+ports@vmeta.jp> (maintainer)
Remove libjpeg.so.11 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps. Bump dependent ports that have not
been bumped since.
Remove non-default REALVNC option from net/xrdp and net/xrdp-devel,
it depends on the expired net/vnc port.
PR: 214472
Submitted by: myself
Approved by: maintainer (meta+ports@vmeta.jp)
Update USE_GITHUB so it does not require GH_COMMIT.
Using this new scheme allows only setting the _tag_ or _commit hash_ in
GH_TAGNAME and not having to know the hash for a tag. This scheme will
download a tarball that has a different checksum than before due to a changed
directory name for extraction.
The following MASTER_SITES are provided to retain the old checksum and
directory structure (that require GH_COMMIT):
GH -> GHL
GITHUB -> GITHUB_LEGACY
Differential Revision: https://reviews.freebsd.org/D748
Submitted by: amdmi3
Reviewed by: mat, swills, antoine, bdrewery
With hat: portmgr
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
- Update to 0.7.0b20130912 (includes vulnerabilites fix)
- Support stagedir
- Normalize COMMENT
- Add options to select VNC variants
- Change RSA key pair generation behaviour
- Do not install Linux specific script
- Put additional keymaps in FILESDIR rather than fetching from remote site
- Change behaviour of installing additional keymaps
- Makefile style sync with net/xrdp
PR: ports/183312
Submitted by: Koichiro IWAO <meta+ports@vmeta.jp> (maintainer)
