A2ps formats each named file for printing in a postscript printer; if
no file is given, a2ps reads from the standard input. The format used
is nice and compact: normally two pages on each physical page, borders
surrounding pages, headers with useful information (page number,
printing date, file name or supplied header), line numbering, etc.
This is very useful for making archive listings of programs.
Additionally, A2ps "pretty print"s using special fonts for a wide array
of languages, making things like program listings much more legible.
LICENSE: GPL3 or later
===> The following configuration options are available for a2ps-4.15.8_1:
NLS=on: Native Language Support
I18N=off: Enable I18N support
EMACS=off: Enable Emacs support
===> Use 'make config' to modify these settings
Emacs Lisp ports framework: Overhaul
This overhaul introduces four key changes to the elisp ports framework:
1. Remove support for packaged byte-compiled elisp.
The primary motivation is to remove a large number of flavor-specific
packages and to simplify the ports tree. As an example, supporting
byte-compiled elisp for devel/tablist required six packages, one for
each flavor of editors/emacs and editors/emacs-devel. With over 100
elisp ports and requests for new Emacs flavors, this was
unmanageable.
2. Install configuration to integrate with Emacs's native compilation
machinery, allowing elisp from ports to be compiled into the standard
(Only the first 15 lines of the commit message are shown above )
Chase major version update of editors/emacs-devel
Bump PORTREVISION of most USES=emacs ports after editors/emacs-devel
major version increased from 30 to 31.
Sponsored by: The FreeBSD Foundation
Chase editors/emacs update to 29.4
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish, yasu
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D45705
Chase editors/emacs update
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D44492
*/*: Chase editors/emacs update
- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
paths
- Bump PORTREVISION of ports with USES=emacs. This is required for two
reasons. Emacs lisp files need to be byte compiled for the new Emacs
version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
need to be relocated.
Reviewed by: ashish
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D43615
editors/emacs: Update to 29.1
* Update Canna patch to the one for Emacs 29.
* Add new options PGTK, SQLITE3, TREESITTER and WEBP. SQLITE3 and
TREESITTER are ON by default. PGTK and WEBP options are excluded
from nox flavor.
* CARGO option doesn't imply XFT but prevents it. It is caused as a
result of adding pure GTK support (PGTK option).
* OTK options doesn't imply XTF any more. It is also caused as a
result of adding pure GTK support.
* Update NATIVECOMP option so it specifies ahead-of-time compilation
via the configure argument.
* Remove "experimental" from NATIVECOMP_DESC.
* Add print/freetype2 and x11-fonts/fontconfig to CAIRO_LIB_DEPENDS
and GTK3_LIB_DEPENDS. Necessary to link emacs binary with shared
(Only the first 15 lines of the commit message are shown above )
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
print: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alexander Vereeken <Alexander88207@protonmail.com>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alonso Cardenas Marquez <acm@FreeBSD.org>
* Andreas Klemm <andreas@FreeBSD.org>
* Andreas Klemm <andreas@klemm.gtn.com>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Anish Mistry <amistry@am-productions.biz>
(Only the first 15 lines of the commit message are shown above )
editors/emacs: Update to version 27.1
Please refer to the 20200811 UPDATING entry when upgrading
dependent (*-emacs26-*) ports.
Port changes:
- depend on math/gmp
- match upstream by turning CAIRO, HARFBUZZ, and JSON options and on and
turning MAGICK off by default
- remove OPENMP check for graphics/ImageMagick as the openmp is now
included in base
- update EMACS_VER in Mk/Uses/emacs.mk
- bump USES=emacs ports or remove BROKEN for net-im/jabber.el and
deskutils/howm, which now build
Submitted by: HIROSE Yuuji <yuuji@gentei.org> (canna patch)
Reviewed by: ashish
Differential Revision: https://reviews.freebsd.org/D23966
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
Flavorize and modernize Emacs ports
- Convert USE_EMACS to USES=emacs
- Remove editors/emacs-nox11 (refer to nox flavors of editors/emacs and
editors/emacs-devel)
- Permit default Emacs flavor to be specified in make.conf
- Rename japanese/migemo-emacs23 to japanese/migemo-emacs
- Update and simplify audio/emms and fix build on FreeBSD 10 [1]
- Update databases/bbdd and fix build on FreeBSD 10 [1]
- Update editors/emacs-devel
- Ensure Makefile shell commands that change directory are executed in a
subshell
- Silence some portlint warnings
[1] By not depending on base texinfo
PR: 225404
Reviewed by: antoine
Approved by: portmgr (mat) ashish (maintainer)
Differential Revision: https://reviews.freebsd.org/D13506
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
Support LIBS like LDFLAGS.
- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS. Also remove references to
PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
required additional patches.
Somewhat simplified a linker command line looks like:
${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}
where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us. If possible -L and -l flags need to be
(Only the first 15 lines of the commit message are shown above )
Convert all :U to :tu and :L to :tl
Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)
bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore
Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier
With hat: portmgr
Add libpaper support to print/a2ps-*[1], print/c2ps-*, print/lprps-*,
graphics/jpeg2ps-*, and merge the papersize-suffixed versions into
single ones respectively as print/psutils did.
Approved by: dinoex (maintainer) [1]
