KDE3 and QT3 expired on 2013-07-01, remove these ports.
Unfortunately, this also affects some ports using QT3 as a GUI toolkit.

Changes to infrastructure files:
- bsd.kde.mk : obsolete, remove
- bsd.qt.mk : note that a CONFLICTS_BUILD line can probably go after a while
- CHANGES : document the removals from bsd.port.mk
- KNOBS : remove KDE and QT (KDE4 and QT4 should be used instead)
- MOVED : add the removed ports

PR:		ports/180745
Submitted by:	rene
Approved by:	portmgr (bapt)
Exp-run by:	bapt

Mark job unsafe and convert to USES=gmake

Rectify USE_TEX to support both of teTeX and TeXLive.

TEX_DEFAULT:
	A knob to choose teTeX or TeXLive.  One can specify in /etc/make.conf.

USE_TEX:
	A knob for port developers.  Valid keywords are listed in
	bsd.tex.mk.

Remove *_DEPENDS from ports which depend on teTeX and add USE_TEX=tetex
instead to make migration to TeXLive easier.

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

Convert to new options framework ports in p* catories

Chase boost update

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

- Kick MD5 Support

Bump PORTREVISION after open-mofit update

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update boost to 1.39
- Split boost port to separate components, with boost-all metaport

PR:             ports/137054
Submitted by:   Alexander Churanov <churanov.port.maintainer@gmail.com>
(maintainer)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Here's a twist: a port that the import of gcc4.2 _unbroke_.  Mark it so.

Reported by:    pointyhat
Approved by:    portmgr (self)

Unbreak: Use bundled (older) boost instead of the one installed
by ports.

Submitted by:   maintainer
PR:             ports/115521

- Remove the DESTDIR modifications from individual ports as we have a new,
  fully chrooted DESTDIR, which does not need such any more.

Sponsored by:   Google Summer of Code 2007
Approved by:    portmgr (pav)

BROKEN: Does not build

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 1.4.4
- Unbreak it
- Make all programs and datadir with cjk- prefix so they do not conflict
  with print/lyx. Remove CONFLICTS

PR:             ports/109337
Submitted by:   Koji Yokota <yokota at res.otaru-uc.ac.jp> (maintainer)

BROKEN: Does not build

- Reflects the update of the Japanese message file.
- bump PORTREVISION

PR:             ports/108790
Submitted by:   maintainer (Koji Yokota)

- Marked BROKEN on FreeBSD 7 as it doesn't compile.
- Small fixes on Makefile.

PR:             ports/104873
Submitted by:   Koji Yokota <yokota@res.otaru-uc.ac.jp> (maintainer)

- Update to 1.4.2
- Take over maintainership

PR:             ports/102401
Submitted by:   Koji Yokota <yokota@res.otaru-uc.ac.jp>

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Don't depend on binary that is gone from X.Org with 6.9 release.

- Don't touch mtree symlinks

Drop maintainership. :<

- Update to 1.3.5

PR:             ports/85841
Submitted by:   Koji Yokota <yokota@res.otaru-uc.ac.jp>
Approved by:    maintainer timeout (cjh; 3 months)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Build fix for 5.x.

PR:             ports/71883
Submitted by:   Ports Fury

BROKEN on 5.x: Does not compile

Approved by:    portmgr (self)

Chase libaspell to aspell.16.

- Add the X_WINDOW_SYSTEM={xorg,xfree86-4,xfree86-3} variable to bsd.port.mk,
  and make XFREE86_VERSION map to it.  XFREE86_VERSION is now deprecated.
- Make xorg the default X_WINDOW_SYSTEM on -current.
- Add several new X_*_PORT variables which point to various pieces of X11 based
  on the setting of X_WINDOW_SYSTEM, and make ports use them.
- Add information to CHANGES about how to handle the transition.

PR:             ports/68763
Approved by:    portmgr (marcus)
Approved by:    re (scottl)

Sync with new bsd.autotools.mk

Update to 1.3.4-1.

PR:             ports/63753
Submitted by:   Ports Fury
Approved by:    maintainer timeout (>2 months)

SIZEify (maintainer timeout)

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

Now gettext 0.12.1 is gettext-old.

Bump the PORTREVISION for the ports directly affected by the gettext upgrade.

Prodded by:     kris

Chase the libintl.so shared lib version.

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

Update to 1.2.3.

PR:             ports/46946
Submitted by:   Ports Fury

Forgot to add xforms.m4 in last commit.

Update to 1.2.1 and unbroke ports.

PR:             ports/43705
Submitted by:   Ports Fury

BROKEN: Does not link

Chase the aspell so version bump.  Bump PORTREVISION.

Chase shlib rev of devel/gettext

Submitted by:   lots and lots
Pointy hat to:  ade

Update to 1.2.0.

Based on Ports Fury's patch, I added:
 - compliation fix for -current
 - some c++-related fix
 - advice of R. Lahaye <lahaye@snu.ac.kr> for xforms

PR:             ports/40077
Submitted by:   Ports Fury and other people on -ports

Bump XForms lib. version.

gettext upgrade uber-patch (stage 3)

- switch devel/gettext (0.11.1) on, installing full package
- flip devel/gettext-old (0.10.35) to installing only static binaries
  with a "-old" suffix -- gettext-old will have its deorbit burn
  sequence initiated just after 4.6-RELEASE
- fix up ports for the new world order

Reviewed by:    portmgr

Update to CJK-LyX-1.1.6fix4.

I am not sure that it really works. It doesn't work in my environment
(-current today) because libc.3 and libc.5 conflicts due to xforms,
in CJK locale mode. It need -stable test.

PR:             ports/35698
Submitted by:   Eric Yu <ericyu@mail2000.com.tw>

Stage 1 of gettext update.

Move gettext (0.10.35) with gettext-old
Update gettext from gettext-devel (0.10.40)
Remove gettext-devel
Fix dependencies

Stage 2 will involve upgraded gettext to 0.11 and fixing issues
Stage 3 involves a de-orbit burn sequence for gettext-old

Reviewed by:    portmgr

Update CJK patchset of 1.1.6fix3.   I think it is broken in -current under CJK
locale   because of xforms+locale.    

Update to 1.1.5fix2    

Convert category print to new layout.  

Update to 1.1.5fix1.    

(1) Add new variable, XFREE86_VERSION, to specify which version of       XFree86
(3 or 4) to depend to when USE_XLIB is set.       XFREE86_VERSION defaults to 3
for now, but adventurous users can       override it in /etc/make.conf.  When
XFREE86_VERSION=3, USE_XLIB       will add a dependency to x11/XFree86; when it
is set to 4, the       dependency will be to x11/XFree86-4-libraries.  When     
 XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS       hacks
to avoid messing with XFree86 are turned off.    

Add CJK-LuX, Document processor interfaced with LaTeX, with CJK support