This software is a filter program used with Common UNIX Printing
System (CUPS) from the Linux. This can supply the high quality print
with Seiko Epson Color Ink Jet Printers.
This product supports only EPSON ESC/P-R printers. This package can be
used for all EPSON ESC/P-R printers.
For detail list of supported printer, please refer to below site:
https://download.ebz.epson.net/dsc/search/01/search/?OSC=LX
===> The following configuration options are available for epson-inkjet-printer-escpr-1.8.5:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
# Example to add printer
This is an example of how to set up EP-803AW (white color EP-803A).
1. start cupsd
service cupsd start
2. find the PPD file for the printer
lpinfo --make-and-model 'EPSON EP-803A' -m
Use the first column.
3. find the device-uri for the printer
lpinfo -v
USB printer (using result returned by lpinfo)
usb://EPSON/EP-803A?serial=XXXXXXXXXXXXXXXXXX&interface=1
USB printer (using device node directly)
usb:/dev/ulpt0
If printer cannot handle the reset on open, use /dev/unlpt0 instead.
Network printer (using LPD Port)
lpd://192.0.2.100:515/PASSTHRU
Network printer (using PDL Data Streaming Port)
socket://192.0.2.100:9100
4. add the printer
The following is an example of a command to use LPD port.
lpadmin -p EPSON_EP-803AW \
-m epson-inkjet-printer-escpr/Epson-EP-803A-epson-escpr-en.ppd \
-v lpd://192.0.2.100:515/PASSTHRU \
-D 'EPSON EP-803AW be careful of ink dripping :)'
Specify the name of the printer in option -p.
Using the result of 2. for option -m.
Using the result of 3. for option -v.
Option -D is description of the printer.
* * *
print/epson-inkjet-printer-escpr: Update to 1.7.26
New PPD files for the following models have been added.
EP-315 series
PX-S155 series
PX-S505 series
WF-2110 series
XP-65 series
WF-M1130 series
No file changes for autoconf, so fixed to use 2.69.
pkg-descr was re-quoted from the description for other packages, not from the
README.
PR: 270169
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
print/epson-inkjet-printer-escpr: Update to 1.7.21
- Supported new models:
ET-2400 series
WF-2930 series
WF-2950 series
WF-2910 series
XP-3200 series
XP-2200 series
XP-4200 series
PR: 265773
print/epson-inkjet-printer-escpr: Update to 1.7.17
New PPD files for the following models have been added:
* ET-1810 series
* ET-2800 series
* ET-2810 series
* ET-2820 series
* ET-2850 series
* L3250 series
* L3260 series
* L4260 series
* L5290 series
* ST-C2100 series
* WF-2820 series
* WF-2840 series
* WF-2870 series
* XP-2150 series
* XP-3150 series
* XP-4150 series
PR: 258074
print/epson-inkjet-printer-escpr: Update to 1.7.10
Drop gmake from USE=. This is because the syntax that requires gmake is
not used.
PR: 256115
Approved by: maintainer
print/epson-inkjet-printer-escpr: 1.6.4 -> 1.6.9
- MASTER_SITE changed to LOCAL/pi for now
- corrections of brightness, contrast are halved
- saturation is precisely set
PR: 209221
Submitted by: Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)
Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3. Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.
Long description:
First some background. When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain. Costs used to be configured in such a way that files were
first converted to PostScript. This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers. Nowadays most filters
(Only the first 15 lines of the commit message are shown above )
Add print/epson-inkjet-printer-escpr, CUPS driver for EPSON inkjet
printers with ESC/P-R control language under GPL. The port name is
the same one as Linux's while it is a bit lengthy.
Submitted by: tatsuki_makino@hotmail.com
PR: 203258
