foo2zjs is an open source printer driver for printers that use the Zenographics
ZjStream wire protocol for their print data, such as the Minolta/QMS magicolor
2300 DL or Konica Minolta magicolor 2430 DL. These printers are often
erroneously referred to as winprinters or GDI printers.
However, Microsoft GDI only mandates the API between an application and the
printer driver, not the protocol on the wire between the printer driver and the
printer. In fact, ZjStream printers are raster printers which happen to use a
very efficient wire protocol which was developed by Zenographics and licensed
by most major printer manufacturers for at least some of their product lines.
ZjStream is just one of many wire protocols that are in use today, such as
Postscript, PCL, Epson, etc.
===> The following configuration options are available for foo2zjs-20161203_2:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
1) Please read the detailed installation instructions in the file:
* /usr/local/share/doc/foo2zjs/INSTALL
2) Go to tmp directory and run getweb script.
# cd /tmp && getweb all
3) Copy icm and img files.
# cp DL*.icm CP*.icm km2430*.icm /usr/local/share/foo2zjs/icm && \
cp sihp*.img /usr/local/share/foo2zjs/firmware && \
cp hpclj26*.icm km2430*.icm /usr/local/share/foo2hp/icm && \
rm *.icm *.img
4) Edit /usr/local/etc/devd/foo2zjs.conf to fit your needs
and restart devd.
5) Enjoy it ;)
archivers/mscompress: set maintainership and add missing conflict
Submitter is maintainer of several ports.
PR: 279721
Reported by: mew14930xvi@inbox.lv
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
GOOGLE_CODE has gone away.
- If a port has another upstream, remove GOOGLE_CODE
- If a port only has GOOGLE_CODE mark it BROKEN
Some ports have a local mirror configured but for security reasons, it
is not considered upstream.
Sponsored by: Absolight
Depend on cups-filters instead of foomatic-filters to provide foomatic-rip.
Foomatic-filters is no longer developed.
PR: 208551
Submitted by: pyo@mail.ru
Make print/ghostscript9-agpl-base the default Ghostscript port. Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.
Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.
Fix print/ghostscript9-agpl-base to install eps2write.
Update math/asymptote to 2.37 to support newer Ghostscript.
PR: 208159
Exp-run by: antoine
Approved by: portmgr (antoine)
Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3. Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.
Long description:
First some background. When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain. Costs used to be configured in such a way that files were
first converted to PostScript. This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers. Nowadays most filters
(Only the first 15 lines of the commit message are shown above )
- Split ghostscript into X11-independent and -dependent parts:
* print/ghostscript{7,8,9,9-agpl}-base
Installs Ghostscript binary, libgs, and related files.
These ports do not depend on X11 libraries (i.e. x11* devices
are not available). USES=ghostscript will set dependency on
one of them depending on GHOSTSCRIPT_DEFAULT.
The default device is set to "display" or "bbox".
* print/ghostscript{7,8,9,9-agpl}-x11
Installs a shared library which provides X11 support to
the installed Ghostscript binaries. x11* devices will be
(Only the first 15 lines of the commit message are shown above )
Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.
Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl
PR: 201201 (exp-run)
Approved by: portmgr (mat@)
Exp run by: antione@ (previous patch)
Differential Revision: https://reviews.freebsd.org/D2938
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
print/foo2zjs: add run time dependency upon textproc/gsed
. assumig the following code is intended, add a run time dependency
upon textproc/gsed:
----- foo2zjs-pstops.sh -----
case `uname -s` in
FreeBSD) sed=gsed;;
-----
. bump PORTREVISION.
Reported by: stb@ (at freebsd-ports@)
MFH: 2014Q2
print/foo2zjs: update to version 20140401.
Changes:
2014-04-01 Rick Richardson <rick.richardson@comcast.net>
* foo2hbpl2 foomatic-db files and PPDs:
Bug with default PageSize.
PLEASE delete and recreate the foo2hbpl2 printers.
Release cups-* nad foomatic-* ports. Currently I have no enough
spare time for those ports.
I've submitted ports/186824 to update cups-* ports to version 1.7.0.
Rely on bsdtar to autodetermine the format of the distfiles when possible
For a while now bsdtar is able to autotermine compression and archive format.
Let's then use tar directly instead of piping to tar.
Now USE_BZIP2 and USE_XZ only set EXTRACT_SUFX to the right format
- DISTNAME= ${PORTNAME}-${PORTVERSION} is the default and not needed.
PR: ports/153292
Submitted by: myself (pgollucci)
Tested by: -exp run by pav
Approved by: portmgr (pav)
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
- Update to 20061010
- Fix wrapper files
- Add a note to pkg-message about a problem with foo2hp using 2bpp
PR: ports/104344ports/103616
Submitted by: Frank J. Laszlo, Armin Pirkovitsch
Approved by: portmgr (erwin)
Distfile rerolled, for the third time in 48 hours (small comments changed)
Reproted by: Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
Approved by: maintainer (on IRC)
- Update to 20060603
- Now, icm and firware files are downloaded using getweb script
PR: ports/98511
Submitted by: Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe> (maintainer)
foo2zjs is an open source printer driver for printers that use the Zenographics
ZjStream wire protocol for their print data, such as the Minolta/QMS magicolor
2300 DL or Konica Minolta magicolor 2430 DL. These printers are often
erroneously referred to as winprinters or GDI printers.
However, Microsoft GDI only mandates the API between an application and the
printer driver, not the protocol on the wire between the printer driver and the
printer. In fact, ZjStream printers are raster printers which happen to use a
very efficient wire protocol which was developed by Zenographics and licensed
by most major printer manufacturers for at least some of their product lines.
ZjStream is just one of many wire protocols that are in use today, such as
Postscript, PCL, Epson, etc.
WWW: http://foo2zjs.rkkda.com/
PR: ports/94592
Submitted by: Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
