* print/ghostscript-* and related ports have been renamed in the
  following way:

        print/ghostscript-gnu -> print/ghostscript7
        print/ghostscript-gnu-nox11 -> print/ghostscript7-nox11
        print/ghostscript-gnu-commfont -> print/ghostscript7-commfont
        print/ghostscript-gpl -> print/ghostscript8
        print/ghostscript-gpl-nox11 -> print/ghostscript8-nox11
        japanese/ghostscript-gnu-jpnfont -> print/ghostscript7-jpnfont
        korean/ghostscript-gnu-korfont -> print/ghostscript7-korfont

* USE_GHOSTSCRIPT now supports a version number which the port
  requires.  The valid value is "7" or "8".  If other value is
  specified, value of WITH_GHOSTSCRIPT_VER is used.

* WITH_GHOSTSCRIPT_GNU has been removed in favor of
  WITH_GHOSTSCRIPT_VER.  The valid value of WITH_GHOSTSCRIPT_VER is
  "7" or "8", and the default value is "8".

Approved by:    portmgr (pav)

- Remove duplicates from MAKE_ENV after inclusion of CC and CXX in default
MAKE_ENV

Remove a workaround for PostScript files generated by old
acroread.  GS reports an error when it reads some broken (but
should be processed) PS files.

Reported by:    Chuck Robey

- Fix build problem on !i386 platforms[1].
- Use --with-{ijs,jasper} instead of running each configure script.
- Make descriptions of OPTIONS shorter than 70 chars wide.
- Add "display" (GS_display) device[2].

Reported by:    pointyhat[1],
Requested by:   Sascha Blank (blank dot sascha at googlemail dot com)[2]

Fix few typos in the knobs(non-fatal).

Approved by:    shaun (mentor, implicit)

- fix typo

Remove SHLIB knob.

Requested by:   mezz

- Update to 8.62.
- Use OPTION for driver selection.
- Revert bogus Japanese font support patch.  This version already
  supports Japanese TTF/OTF.
- Add more Asian fonts in cidfmap.
- Clean up Makfile.

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Incorrect CONFLICTS in multiple ports.

        There are incorrect CONFLICTS in multiple ports. E.g.:
        contain two CONFLICTS= lines, the second line overrides the first one.

PR:             ports/122851
Submitted by:   Anatoly Borodin <anatoly.borodin@gmail.com>

- Bump PORTREVISION for CONFLICTS changed

Noticed by:     flz

- lang/gambc, print/ghostscript-gpl, print/ghostscript-gnu all install
  bin/gsc, so make they conflict to each others

PR:             ports/122792
Reported by:    Anatoly Borodin <anatoly.borodin at gmail.com>
Approved by:    Rob Zinkov <rzinkov@eden.rutgers.edu> (maintainer of lang/gambc)

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

- When running make config under ghostscript-gpl-nox11, X11 is selected by
  default. Try to make X11 default off when WITHOUT_X11 is defined.

- Fix previos commit.

- Fix build on AMD64 when WITH_FT_BRIDGE=yes is enabled

PR:             121462
Submitted by:   Tsurutani Naoki <turutani@scphys.kyoto-u.ac.jp>

- As we use .SILENT, no need to use @

Pointed out by: KATO Tsuguru <tkato432 at yahoo.com>

- Reduce dependencies by using ijs distribution from linuxprinting.org. This
  fixes `make release' with NOPORTS.

Submitted by:   KATO Tsuguru <tkato432 at yahoo.com>

- Fix security issue

PR:             ports/121283
Security:       CVE-2008-0411
Submitted by:   bf <bf2006a at yahoo.com>

- Fix USE_GNOME

- Add full support for Japanese fonts and ijs driver
- Fix FT_BRIDGE issue
- Use OPTIONS (not for driver selection)

PR:             ports/119566
Submitted by:   Koji Yokota <yokota at res.otaru-uc.ac.jp>

- Update to 8.61

PR:             ports/118608
Submitted by:   KATO Tsuguru <tkato432 at yahoo.com>

Adding a post-installation message , telling the user that he needs a
dvips to run dvipdf.

PR:             ports/117878
Submitted by:   Steve Wills <steve (at) mouf.net>

Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl
since version 8.57. The leading ghostscript is the -gpl one.

Approved by:    portmgr (pav)

- Disable GS_DEVS_SHARED to fix svga drivers build

PR:             ports/115593
Reported by:    Barbara <barbara.xxx1975 at libero.it>
Patched by:     KATO Tsuguru <tkato432 at yahoo.com>

- Add missing patch in 8.60 update

PR:             ports/115395
Submitted by:   KATO Tsuguru <tkato432 at yahoo.com>

- Update to 8.60. The contributed drivers made by gs-esp are now merged in,
  but still missing improved CJKV font handling functions.

PR:             ports/115395
Submitted by:   KATO Tsuguru <tkato432 at yahoo.com>

- Replace USE_XLIB with USE_XORG (xt xext)
- Bump PORTREVISION

Tested by:      pointyhat
Thanks to:      pav (testing)
Approved by:    garga (mentor, implicit)

Fix build when lvga256 or vgalib is enabled.

Spotted by:     itetcu

Update to 8.57.

Submitted by:   KATO Tsuguru
PR:             ports/113009

- Bump PORTREVISION for xorg72 import (automated tool got confused here)

Reported by:    netchild
Approved by:    portmgr (implicit)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Use japanese/ipa-ttfonts as the default Japanese TrueType
font if any (i.e. no dependency added).  Bump PORTREVISION.

rafan@ reports that the hl250 driver "breaks my print/gv on my amd64", so
deactivate the driver by default.

While here, mark ghostscript-afpl as deprecated.

Submitted by: rafan

Add hl1250 driver, which adds support for the Brother HL-1250 and
compatible printers (for a comprehensive list see
http://www.linuxprinting.org/show_printer.cgi?recnum=Brother-HL-1250).

- Update to 8.56
- Switch to GTK 2.x
- SWitch to ship-in jasper which contains some fixes for gs

PR:             ports/110818
Submitted by:   KATO Tsuguru <tkato432 at yahoo.com>

- Fix build on gcc 4. These two changes are stole from print/ghostscript-afpl.
  Original patches are submitted by Ron MacNeil in ports/94461.

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include misc/ multimedia/ net/ net-mgmt/ net-im/
  net-p2p/ palm/ print/ science/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Sync with ghostscript-afpl:
- Fix fetch for eplaser distfile

Remove USE_REINPLACE from all categories starting with P

Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.

Discussed with: kris
Approved by:    portmgr (implicit)

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

- Add SHA256

Fix MASTER_SITES (pcl3-3.3.tar.gz)

PR:             89293
Notified by:    diff <diff@infosemi.com>

- Fix build on 4-stable when PCL3 driver is enabled [1]
- Update MASTER_SITES for MD2K driver
- Add DMPRT driver
- Add patches necessary for building cups-pstoraster
- Add KRGB support patch for IJS driver

Submitted by:   KATO Tsuguru <tkato432@yahoo.com>
Tested by:      Jose M Rodriguez <josemi@freebsd.jazztel.es>
Pointy hat to:  barner [1]
Reported by:    kris via pointyhat [1]

- Add the PCL3 driver.
- The Ghostscript 8.15 compatibilty patch (patch-pcl3_eprn_eprnrend.c)
  is by Till Kamppeter (till.kamppeter at gmx.net) and has originally
  been posted on [3]

Submitted by:   "Pedro F. Giffuni" <giffunip@asme.org> [1],
                Jose M Rodriguez <josemi@freebsd.jazztel.es> [2]
PR:             ports/77185 [1], ports/76731 (partly) [2]
Obtained from: 
http://www.linuxprinting.org/download/printing/ghostscript-8.x/patches/ghostscript-8.15-pcl3-driver-api8.patch
[3]

Fix typo

PR:             ports/74250
Submitted by:   Ports Fury

Announce the release of GPL Ghostscript. This release is based on
the AFPL Ghostscript 8.00 release of 14 months ago. The most
significant new feature since 7.0x is support for DeviceN
colorspaces, up to 8 colorants total at 8 bits per component. Also,
pdfwrite has seen considerable improvement in font handling, and
many other bug fixes.

PR:             ports/72326
Submitted by:   Ports Fury