Ghostscript is the well-known PostScript interpreter which is available for
all common and most esoteric platforms and supports many different printers
and some displays.
This is distributed with the GNU General Public License, which allows
free use, and free copying and redistribution under certain conditions
(including, in some cases, commercial distribution).
This port includes add-on packages (not part of the official gs release)
o HP8XX driver for HP DeskJet 880C/882C/895C
- http://www.gelhaus.net/hp880c/
o PCL3 driver for HP DeskJet series
- http://home.vrweb.de/martin.lottermoser/pcl3.html
o DJ970 driver for HP DeskJet 970CXi
- http://www.harsch.net/Ghostscript/ghostscript.html
o Special drivers for verious printer models
- Alps, Canon, Epson, NEC, Lexmark, Ricoh,...
o Additional contributed uniprint driver profiles for
- Epson Stylus Color 740 and Epson LQ-1170
WWW: http://www.cs.wisc.edu/~ghost/doc/GPL/index.htmhttp://www.ghostscript.com/
- Split ghostscript into X11-independent and -dependent parts:
* print/ghostscript{7,8,9,9-agpl}-base
Installs Ghostscript binary, libgs, and related files.
These ports do not depend on X11 libraries (i.e. x11* devices
are not available). USES=ghostscript will set dependency on
one of them depending on GHOSTSCRIPT_DEFAULT.
The default device is set to "display" or "bbox".
* print/ghostscript{7,8,9,9-agpl}-x11
Installs a shared library which provides X11 support to
the installed Ghostscript binaries. x11* devices will be
(Only the first 15 lines of the commit message are shown above )
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
dns/libidn:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Always install libidn-components.png because it is used by libidn.info
- Add -lintl to Libs.private instead of Libs in libidn.pc
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
(Only the first 15 lines of the commit message are shown above )
Fix drivers.mak generation. It did not work with X11, iconv, and svgalib
device drivers after OPTIONS_{MULTI,GROUP} conversion.
Reported by: Gert Doering
- Use OPTIONS_MULTI and OPTIONS_GROUP.
- Add dependency on libpaper unconditionally to 8.x and 9.x.
- Fix CONFLICTS_INSTALL.
- Remove ABI version numbers from LIB_DEPENDS.
Rely on bsdtar to autodetermine the format of the distfiles when possible
For a while now bsdtar is able to autotermine compression and archive format.
Let's then use tar directly instead of piping to tar.
Now USE_BZIP2 and USE_XZ only set EXTRACT_SUFX to the right format
Update to 9.06. Changes include:
- PDF/A-2 - pdfwrite now supports the creation of PDF/A-2 files.
Simply specifying "-dPDFA" continues to have the old behaviour of creating
PDF/A-1b files. For PDF/A-2 the command line should include "-dPDFA=2".
- pdfwrite "Server mode" - pdfwrite can now be run in "server mode" which
allows the device to be closed without closing the interpreter. This means
it is no longer necessary to terminate GS before starting a new PDF
conversion.
Feature safe: yes
Revert r303635 to fix an wrong OPTIONS handling and resolve svgalib dependency
in the case of !amd64 && !i386 in another way.
Pointed out by: crees
Pointy hat to: hrs
- Add LICENSE.
- Make MAKE_JOBS_SAFE=yes.
- Replace OPTIONS with OPTIONSng. Bump PORTREVISION because a package created
with Makefile.drivers r1.3 had some inconsistent default values.
New options framework for the ports
for maintainers:
it introduces 3 different types of options: simple, multi and single:
- simple options are the same as the current options (i.e. on or off.)
- multi options are options where at least one must be set (1-N).
- single options are options where one and only one must be set (exclusive
options).
for users:
- OPTIONS_SET: globally enable some options
- OPTIONS_UNSET: globally disable some options
- ${UNIQUENAME}_SET: enable per-port choice of options
- ${UNIQUENAME}_UNSET: disable per-port choice of options
For compatibility the old OPTIONS framework is now working on top of the new one
The options previously set with old OPTIONS are imported and converted
transparently.
A new knob NO_DIALOG if defined in the the config-conditional target is ignored
(prevent the dialog(1) ui to show up.
Thanks to all people involved:
beat@, crees@, Bryan Drewery, linimon@, novel@ and others, for testing,
comments, patches
Fix build. FT_BRIDGE=1 no longer needs FT_* variables, and the freetype
directory has been removed to prevent it from being used accidentally.
Feature safe: yes
Use libpaper for default paper size configuration. It is no longer hardcoded
and can be changed by PAPERSIZE environment variable at run time.
Feature safe: yes
Update to 9.05. Changes include:
- Ghostscript's PDF interpreter is now able to make use of the
DroidSansFallback TrueType font to automatically substitute for
missing CIDFonts. Whilst it is always best to ensure the
original CIDFont is available for the best and most accurate
output, the ability to make an automatic substitution will be
valuable for those merely viewing or proofing such files.
- This release includes support for a proofing ICC profile. The
command option is specified using -sProofProfile=filename. With
this option, the color output will emulate what would be
obtained had the source file been rendered on a device defined
by the proofing profile. (See GS9_Color_Management.pdf for
details.)
(Only the first 15 lines of the commit message are shown above )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
Add print/ghostscript9, an interpreter of PostScript and PDF page
description languages. Changes from 8.x series include:
- This release includes a move to an ICC-based color rendering
workflow. The design allows easy integration of 3rd party color
management modules (CMMs) and management of DeviceN and spot source
colors with ICC profiles as well as with non-ICC proprietary
methods. The default CMM is the well known littleCMS. Postscript
color objects and non-ICC CIE-based PDF color spaces are converted
to equivalent ICC profiles enabling complete color management for
all color spaces by an ICC-based CMM. New command line options
enable the specification of gray, rgb and cmyk default ICC profiles
as well as output device ICC profiles. The new work flow provides
performance improvements in the rendering of images, shadings and
transparencies. In addition, the color conversions are designed to
(Only the first 15 lines of the commit message are shown above )
