print/hplip(-plugin): Update to 3.24.4

print/hplip(-plugin): Update to 3.23.12

print/hplip(-plugin): Update to 3.23.8

print/hplip(-plugin): Update to 3.23.5

audio/opus: bump consumers after update to 1.4

print/hplip(-plugin): Update to 3.22.10

PR:		267954, 267955

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>

Limit portscout in a few ports

devel/autoconf2.*: fix PORTSCOUT variable.

print/hplip-plugin: portscout cannot find new versions and the version
is always the same as print/hplip.

security/mbedtls: limit portscout to stable versions.
(also switch to new github account)

print/hplip-plugin: update to 3.22.4 and pet portlint

print/hplip(-plugin): update to 3.22.2

- Convert post-patch to real patches because they are easier to
  maintain.
- Fix a NULL dereference in the scanner backend when D-Bus isn't
  running.
- Depend on sysutils/py-distro to make hp-toolbox (Device Manager) work
  again.
- Upstream switched to Avahi for mDNS support.  Rename the SNMP option
  to NETWORK because it's not just SNMP now.
- Don't install some programs related to uninstalling and upgrading of
  HPLIP and the installation of firmware plugins because they circumvent
  the package system.
- Install icons in share/icons so desktops can choose an appropriate
  resolution.

Portions taken from a patch by Oleg Sidorkin <osidorkin@gmail.com>.

PR:		255586, 257034, 257512

Deorbit RESTRICTED && NO_CDROM, part one.

For ports that already use the licenses framwork, merge the content of
RESTRICTED/NO_CDROM/LEGAL* entries into LICENSEs.

Approved by:	rene
Differential Revision:	https://reviews.freebsd.org/D30010

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

Update to 3.20.6.

PR:		247477
Submitted by:	fluffy

print/hplip and print/hplip-plugin: Handover maintainership to tijl

Thanks very much to Tijl for offering to take on maintaining these ports
since I haven't been able to find enough time.

Approved by:	tijl (new maintainer)

print/hplip[-plugin]: update to 3.20.3 release

PR:		245405
Submitted by:	fluffy
Approved by:	maintainer (timeout, 21d)
Relnotes:	https://developers.hp.com/hp-linux-imaging-and-printing/release_notes

print/hplip and print/hplip-plugin: Update to 3.19.12

Changes this release:
  https://developers.hp.com/hp-linux-imaging-and-printing/release_notes

PR:		242589
Submitted by:	fluffy
Submitted by:	Neel Chauhan <neel@neelc.org> (earlier patch version)

print/hplip: Update to 3.19.10
print/hplip-plugin: Update to 3.19.6

Changes this release:
  https://developers.hp.com/hp-linux-imaging-and-printing/release_notes

PR:		241528
Reported by:	S Joseph <josephatwork@gmail.com>

print/hplip and print/hplip-plugin: Update to 3.18.6

Changes this release:
  https://developers.hp.com/hp-linux-imaging-and-printing/release_notes

PR:		240428
Submitted by:	asomers

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call

print/hplip and print/hplip-plugin: Update to 3.17.11

Changes this release:
  https://developers.hp.com/hp-linux-imaging-and-printing/release_notes

print/hplip and print/hplip-plugin: Fix URL and LICENSE information.

The URL change reflects a recent website change by HP, and was
preventing print/hplip-plugin from fetching correctly.

The LICENSE change reflects the fact that the introductory license
to the python source files mention that a later version of the GPL
can optionally be used.

PR:		224435
PR:		224408
Submitted by:	Mason Loring Bliss <mason@blisses.org>
Reported by:	jhb
Reviewed by:	jhb
MFH:		2017Q4

print/hplip and print/hplip-plugin: Update to 3.17.9

Changes this release:
  http://hplipopensource.com/hplip-web/release_notes.html

print/hplip[-plugin]: Update to 3.17.7

Changes this release:
  http://hplipopensource.com/hplip-web/release_notes.html

print/hplip: Update to 3.17.4

Changes this release:
  http://hplipopensource.com/hplip-web/release_notes.html

print/hplip and print/hplip-plugin: Update to 3.16.11

Changes this release:
  http://hplipopensource.com/hplip-web/release_notes.html

Approved by:	adamw (mentor, implicit)

print/hplip and print/hplip-plugin: Update to 3.16.10

- FAX option now depends on py-reportlab v3 rather than v2 (deprecated)
- Clean up RUN_DEPENDS syntax and OPTIONS whitespace
- Remove line which set unused variable PYTHON_SITELIBDIR_REL

Changes this release:
  http://hplipopensource.com/hplip-web/release_notes.html

Approved by:	adamw (mentor, implicit)

print/hplip and print/hplip-plugin: Take maintainership

Approved by:	adamw (mentor, implicit)

Reassign makc's ports back to the pool.

See "Maintainer Reset" in
https://www.freebsd.org/portmgr/policies_contributors.html. makc's last commit
was in March 31st (r412218), and his ports have been timing out since at least
July (r418155).

I also emailed him 2 weeks ago and have received no response so far.

print/hplip and print/hplip-plugin: Update to 3.16.9

Changes this release:
  http://hplipopensource.com/hplip-web/release_notes.html

Approved by:	makc (maintainer timeout), mat (mentor)
Differential Revision:	https://reviews.freebsd.org/D8031

print/hplip and print/hplip-plugin: Update to 3.16.8

print/hplip:

- Add LICENSE details
- Changes USE_OPENSSL=yes to USES=ssl
- Create empty directories for pkg-plist @dir entries
- Reformat patches with makepatch (pet portlint)
- Move ${PREFIX}/etc/sane.d/dll.conf to ${PREFIX}/etc/sane.d/dll.d/hpaio
  during post-install, rather than editing ${PREFIX}/etc/sane.d/dll.conf
  during @exec and @unexec during pkg-plist

print/hplip-plugin:

- Re-order LICENSE block (pet portlint)

Changes this release:

http://hplipopensource.com/hplip-web/release_notes.html

Reviewed by:	mat (mentor)
Approved by:	makc (maintainer timeout), adamw (mentor)
Differential Revision:	https://reviews.freebsd.org/D7812

Some plugins have an SONAME field that is different from the library name
so the wrapper library that links to such a plugin cannot find it at
runtime.  Create dummy plugins without SONAME and link the wrapper libraries
against that.

PR:		209426
Tested by:	Andreas Beck <jarles.live@gmail.com>

Install plugins with +x because HPLIP thinks the installation is corrupt
otherwise.

PR:		208142
Reported by:	coder@tuxfamily.org

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

- These binary plugins are compiled for Linux and some require glibc
  functions that our libc does not provide so they fail to load.  Implement
  the glibc functions in a wrapper library for each plugin.
- Do all of the building and installing from do-build and do-install.  The
  upstream install scripts require too many hacks to stay inside the work
  directory.
- Add LICENSE information.

PR:		208142
Tested by:	avg

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters

- Add empty directories to plist

Approved by:	portmgr blanket

print/hplip:
- Update to 3.14.10 [1]
- Fix detection of libusb v1.0 and build with it now
- Enable JetDirect and scanning support by default (requested by pkg users)
- hplip modifies etc/sane.d/dll.conf witch belongs to sane-backends port,
  and writes to this file in staging area. Add commented entry for it in plist
  to pacify staging checks.

print/hplip-plugin:
- Update to 3.14.10
- Add missing entry to plist
- Pass MAKE_ENV for installer to prevent writing to ${HOME}

PR		197245 [1]
Submitted by:	chris@bsdjunk.com

print/hplip-plugin:
- Update MASTER_SITES to fix fetch
- Clean up plist from @dirrm

Reported by:	pkg-fallout
MFH:		2014Q4

- Convert ports of news/ and print/ to new USES=python

Approved by: portmgr (implicit)

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

print/hplip-plugin: sync RESTRICTED with ports/LEGAL

print/hplip-plugin:
- Take maintainership
- Make the port non-interactive, undeprecate
- Remove NO_PACKAGE, the port is already marked as RESTRICTED
- Remove now needless MAKE_ENV

Deprecate unmaintained interactive ports for removal in 2 months

Interactive ports can't be packaged which means they don't get tested
weekly either.  Ideally all interactive ports should be converted to
regular ports.  Reduce the number of these types of ports by pruning
unmaintained ones first.  Those wishing to pick up these ports are
expected to convert them to regular ports if this can be done with
reasonable effort.  Ports deprecated for removal on 20 August 2014:

  * mail/mailagent
  * net/delegate
  * net-mgmt/nocol
  * print/hplip-plugin
  * print/xdvi
  * sysutils/autopsy
  * x11-clocks/xalarm

Approved by:	portmgr (bapt)

Multiple ports: reset maintainers
	Maintainers for these ports have been notified on 5 separate occasions
	over the course of several months about pending actions required.

	We really appreciate the time and effort you put in to maintain
	these ports.

	If you are still interested in helping to maintain these ports just
	reply to me or file a PR and I will happily assign the port to you
	again.

Approved by:	portmgr (implicit)

print/hplip:
- Update to 3.14.4
- Install statically generated cups ppd files
- Add patch to fix ioctl warning

print/hplip-plugin:
- Update to 3.14.4
- Add stage support via fake hplip installation

Update to 3.14.1

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

Add new port print/hplip-plugin:

Firmware and binary drivers from some HPLIP supported printers.

PR:		based on ports/173826
Submitted by:	Anish Mistry <amistry@am-productions.biz>