garbage collect libgnomecups, which should have been collected along
with libgnomeprint

print, science: Add missing USES=gnome

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
  supported by libgnutls-dane and gnutls-cli.  Also clarify the option
  description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4.  Some ports used this library
  in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed.  Ports that used these have been
  updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.

net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.

www/hydra: Mark BROKEN.  This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.

PR:		207768
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters

Cleanup plist

Convert to:
USES=libtool
USES=pathfix
USES=tar:bzip2
Strip binaries

Unbreak with new cups

With hat:	portmgr

- Stage support
- Convert to USE_MAKE to USES

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

- Convert USE_GETTEXT to USES (part 1)

Approved by:	portmgr (bapt)

Finish converting the whole ports tree to USES=pkgconfig

* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
  are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
  in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
  eliminate pkg-config run dependency completely, a second phase is needed
  and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
  Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
  versions for some ports.
* Fix other ports so they build with the new glib version.

Thanks to miwi and crees for helping out with some exp-runs.
Approved by:	portmgr (miwi & bapt)
Obtained from:	gnome team repo

- Fix typos in COMMENT
- Enforce the now clarified rules from the Porter's Handbook (e.g. no dots, no
  A/An, etc.)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Kick MD5 Support

Sync to new bsd.autotools.mk

Bump PORTREVISION in a few more ports affected by the libgcrypt
upgrade (they have references to libgcrypt.so.16).

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Fix the CUPS dependency.

PR:             134641
Submitted by:   dinoex

- Use GNOME macro instead of ${MASTER_SITE_GNOME}, remove
  MASTER_SITE_SUBDIR when possible.

PR:             ports/125243
Submitted by:   pgollucci
Reworked by:    myself
Tested on:      pointyhat exp-run (pav)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

No longer need this patch, this fix the patch apply.

Reported by:    barbara <barbara.xxx1975@libero.it>

Update to 0.2.3

Bump PORTREVISION for a few apps due to gnutls update.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Took a lot of nice patches from Ubuntu Linux to make both of ports work better
with the current version of CUPS. Also, many improvements. Fix a bit in the
plist. Bump thePORTREVISION.

libgnomecups:
--------------------
* patch-20_parse-dot-cups-lpoptions: Parse ~/.cups/lpoptions.
* patch-21_fix-islocal: Check whether the printer URI starts with http://,
  ipp://, or smb:// to test whether its local or not.
* patch-22_ignore-ipp-not-found: Do not warn on stderr in case of
  IPP_NOT_FOUND.
* patch-23_replace-set-printer-attrs: Replace IPP_SET_PRINTER_ATTRIBUTES with
  CUPS_ADD_MODIFY_PRINTER.
* patch-24_mem-leak: Fix memory leak in
  gnome_cups_request_add_requested_attributes().

INSTALLS_SHLIB -> USE_LDCONFIG.

Found by:       portlint (cports.sh)

Add USE_GETTEXT to appease portlint.

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Update to 0.2.2.

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

Bump PORTREVISION to chase the glib20 shared lib version change.

- Update to 0.2.0

Update to 0.1.14

Update to 0.1.13.

Revert the previous updates since they require APIs present in libgnomeui-2.7.
While I'm here, use the new libtool scheme.

Reported by:    Franz Klammer <klammer@webonaut.com>

Update to 0.1.9.

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Use intlhack to fix the build.

Reported by:    pointyhat via kris

Update to 0.1.8.

Submitted by:   John Merryweather Cooper <johnmary@adelphia.net>

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

- Add SIZE to GNOME ports

Submitted by:   trevor

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

Add libgnomecups, the GNOME interface to the CUPS print system.

PR:             54515
Submitted by:   adamw
                Glenn Johnson <gjohnson@srrc.ars.usda.gov>