Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>

Remove # $FreeBSD$ from Makefiles.

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Update to 0.64

- Strip shared library
- Update pkg-descr

Changes:	http://search.cpan.org/dist/Net-CUPS/Changes

Take maintainership

Approved by:	vg (implicit)

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
  supported by libgnutls-dane and gnutls-cli.  Also clarify the option
  description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4.  Some ports used this library
  in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed.  Ports that used these have been
  updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.

net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.

www/hydra: Mark BROKEN.  This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.

PR:		207768
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters

- Add LICENSE

Approved by:	portmgr (blanket)

- Remove broken
- Fix build

PR:		ports/204052
Submitted by:	Mathieu Simon <freebsd@simweb.ch>

Mark BROKEN: Fails to configure or build

=======================<phase: configure      >============================
===>  Configuring for p5-Net-CUPS-0.61_3
Net::CUPS Configuration
Running cups-config ... 2.0.3
The version of the Common Unix Printing System installed
on your system is too old for this module to work properly.
Please upgrade the version of CUPS on your system to version
1.2.2 or higher and re-run Makefile.PL to install this module.

Can't open Makefile: No such file or directory.
===========================================================================
=======================<phase: build          >============================
===>  Building for p5-Net-CUPS-0.61_3
make[1]: cannot open Makefile.

Reported by:	pkg-fallout

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Remove all the bootstrap files (.bs) from the plists.

Starting with perl 5.20, they're not installed any more if empty,
and on FreeBSD, they're (always ?) empty.

PR:		190681
Submitted by:	mat
Exp-Run by:	antoine
Sponsored by:	Absolight

Unbreak with new cups

PR:		ports/188451
Obtained from:	https://rt.cpan.org/Public/Bug/Display.html?id=78583
With hat:	portmgr

- state support

Approved by:	portmgr (blanket infrastructure)

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

- convert to the new perl5 framework

Approved by:	portmgr (bapt@, blanket)

 - Changed my email
 - Trim Makefile headers and positions name and surname within

Approved by:	eadler, rm (mentors)

- update png to 1.5.10

- Add p5-Net-CUPS 0.61

Previous versions of this module attempted to provide a Perl interface
layer similar to the C interface of CUPS.  This was fine for power users,
but most people were not looking for this type of interface.

This module has now been converted to use an object oriented paradigm
to facilitate quicker development and ease of use.

WWW: http://search.cpan.org/dist/Net-CUPS/

PR:             ports/160644
Submitted by:   Veniamin Gvozdikov <g.veniamin@googlemail.com>