This software creates output using the PPA (printer performance
architecture) protocol. This protocol is used by some HP "Windows-only"
printers, including the HP Deskjet 820C series, the HP DeskJet 720 series,
and the HP DeskJet 1000 series. It has been tested on all three printers,
but your personal experience (positive or negative) is very much appreciated!
===> The following configuration options are available for pnm2ppa-1.13_7:
A4SIZE=off: Set A4 (not Letter) as a default paper size
===> Use 'make config' to modify these settings
To configure your printcap to print either ascii"
or Postscript files, add the following lines to your"
/etc/printcap file"
lp|ascii|unix:\\"
:lp=/dev/lpt0:\\"
:sd=/var/spool/lpd:\\"
:if=/usr/local/bin/asciippafilter:\\"
:mx#0:\\"
:sh:"
ps:\\"
:lp=/dev/lpt0:\\"
:sd=/var/spool/ps:\\"
:if=/usr/local/bin/ppafilter:\\"
:mx#0:\\"
:sh:"
*/*: Update WWW to use HTTPS for sourceforge.net projects
Homepage link is permanent redirected to its HTTPS counterpart
Issue reported by repology : https://repology.org/repository/freebsd/problems
Approved by: portmgr (blanket)
PR: 274888
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
print: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alexander Vereeken <Alexander88207@protonmail.com>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alonso Cardenas Marquez <acm@FreeBSD.org>
* Andreas Klemm <andreas@FreeBSD.org>
* Andreas Klemm <andreas@klemm.gtn.com>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Anish Mistry <amistry@am-productions.biz>
(Only the first 15 lines of the commit message are shown above )
Fix build with -fno-common
While here add license, make Makefile better match current standards, and
regenerate patch files (i.e. make portlint happy).
Make print/ghostscript9-agpl-base the default Ghostscript port. Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.
Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.
Fix print/ghostscript9-agpl-base to install eps2write.
Update math/asymptote to 2.37 to support newer Ghostscript.
PR: 208159
Exp-run by: antoine
Approved by: portmgr (antoine)
Resurrect port: print/pnm2ppa
This software creates output using the PPA (printer performance
architecture) protocol. This protocol is used by some HP "Windows-only"
printers, including the HP Deskjet 820C series, the HP DeskJet 720 series,
and the HP DeskJet 1000 series. It has been tested on all three printers,
but your personal experience (positive or negative) is very much appreciated!
WWW: http://pnm2ppa.sourceforge.net/
PR: 207468
Submitted by: Miroslav Lachman <000.fbsd@quip.cz>
Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl
since version 8.57. The leading ghostscript is the -gpl one.
Approved by: portmgr (pav)
[PATCH] print/pnm2ppa: enable choose of ghostscript interpreter
This patch allows the admin of the machine to choose either
print/ghostscript-gnu or print/ghostscript-afp1
PR: ports/54946
Submitted by: Jens Rehsack <rehsack@liwing.de>
