| Port details |
- py-collidoscope Brute force detection of glyph collisions
- 0.5.2_1 print
 =0      0.5.2_1Version of this port present on the latest quarterly branch. - Maintainer: sunpoet@FreeBSD.org
- Port Added: 2021-05-16 15:27:26
- Last Update: 2023-06-27 19:34:34
- Commit Hash: 3d9a815
- Also Listed In: python
- License: MIT
- WWW:
- https://github.com/simoncozens/collidoscope
- Description:
- collidoscope reports on situations where paths overlap in a shaped piece of
text.
This software tries every combination of glyphs within a specified Unicode range
and up to a specified length of string and outputs a report of all situations
where the glyphs collide. It has a number of collision tests:
- Paths in non-adjacent glyphs are never allowed to collide.
- If the cursive test is turned on, then paths with a cursive attachment anchor
are allowed to overlap with paths in an adjacent glyph which also contain a
cursive attachment anchor, but are not allowed to overlap with a path without
a cursive attachment anchor.
- If the area test is turned on, then paths in adjacent glyphs may collide so
long as the area of overlap does not exceed a given percentage of the smallest
path's area. i.e. if the area percentage is set to 25%, then two strokes may
connect, because the overlap is likely to be quite small compared to the size
of the paths involved. But if a stroke significantly overlaps a nukta, it will
be reported as a collision. (Of course, this will not detect strokes which
merely graze a nukta.)
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}collidoscope>0:print/py-collidoscope@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/print/py-collidoscope/ && make install clean
- To add the package, run one of these commands:
- pkg install print/py-collidoscope
- pkg install py39-collidoscope
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-collidoscope listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-collidoscope
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1674589982
SHA256 (collidoscope-0.5.2.tar.gz) = 9bc0e3d4298291f0238e89413d8bb26e20f6e668a38ab8b1d0afd341bd739eef
SIZE (collidoscope-0.5.2.tar.gz) = 34116
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-beziers>=0.0.3 : graphics/py-beziers@py39
- py39-fonttools>=0 : print/py-fonttools@py39
- py39-glyphtools>=0 : print/py-glyphtools@py39
- py39-uharfbuzz>=0 : print/py-uharfbuzz@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- This port is required by:
- for Run
-
- print/py-fontbakery
Configuration Options:- No options to configure
- Options name:
- print_py-collidoscope
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
0.5.2_1
27 Jun 2023 19:34:34
 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
0.5.2_1
23 Apr 2023 09:09:58
|
Gerald Pfeifer (gerald) |
*: Bump PORTREVISIONs for math/mpc update to 1.3.1 |
0.5.2
30 Jan 2023 13:00:14
|
Po-Chuan Hsieh (sunpoet) |
print/py-collidoscope: Update to 0.5.2
Changes: https://github.com/simoncozens/collidoscope/commits/master |
0.4.1
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.4.1
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
0.4.1
20 Jul 2022 14:22:48
|
Tobias C. Berner (tcberner) |
print: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alexander Vereeken <Alexander88207@protonmail.com>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alonso Cardenas Marquez <acm@FreeBSD.org>
* Andreas Klemm <andreas@FreeBSD.org>
* Andreas Klemm <andreas@klemm.gtn.com>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Anish Mistry <amistry@am-productions.biz> (Only the first 15 lines of the commit message are shown above ) |
0.4.1
28 Jan 2022 23:26:48
|
Po-Chuan Hsieh (sunpoet) |
print/py-collidoscope: Update to 0.4.1
Changes: https://github.com/simoncozens/collidoscope/commits/master |
0.4.0
11 Jan 2022 18:44:38
|
Po-Chuan Hsieh (sunpoet) |
print/py-collidoscope: Update to 0.4.0
Changes: https://github.com/simoncozens/collidoscope/commits/master |
0.3.0
05 Nov 2021 19:14:22
|
Po-Chuan Hsieh (sunpoet) |
print/py-collidoscope: Update USES=python
print/py-fonttools requires Python 3.7+ |
0.3.0
21 Sep 2021 03:44:52
|
Po-Chuan Hsieh (sunpoet) |
print/py-collidoscope: Update to 0.3.0
Changes: https://github.com/simoncozens/collidoscope/commits/master |
0.1.1
08 Aug 2021 14:54:10
|
Po-Chuan Hsieh (sunpoet) |
print/py-collidoscope: Update to 0.1.1
Changes: https://github.com/simoncozens/collidoscope/commits/master |
0.0.6
16 May 2021 15:23:45
|
Po-Chuan Hsieh (sunpoet) |
print/py-collidoscope: Add py-collidoscope 0.0.6
collidoscope reports on situations where paths overlap in a shaped piece of
text.
This software tries every combination of glyphs within a specified Unicode range
and up to a specified length of string and outputs a report of all situations
where the glyphs collide. It has a number of collision tests:
- Paths in non-adjacent glyphs are never allowed to collide.
- If the cursive test is turned on, then paths with a cursive attachment anchor
are allowed to overlap with paths in an adjacent glyph which also contain a
cursive attachment anchor, but are not allowed to overlap with a path without
a cursive attachment anchor.
- If the area test is turned on, then paths in adjacent glyphs may collide so
long as the area of overlap does not exceed a given percentage of the smallest
path's area. i.e. if the area percentage is set to 25%, then two strokes may
connect, because the overlap is likely to be quite small compared to the size
of the paths involved. But if a stroke significantly overlaps a nukta, it will
be reported as a collision. (Of course, this will not detect strokes which
merely graze a nukta.)
WWW: https://github.com/simoncozens/collidoscope |
As an Amazon Associate I earn from qualifying purchases.