| Port details |
- py-freetype-py Freetype python bindings
- 2.5.1 print
 =2      2.5.1Version of this port present on the latest quarterly branch. - Maintainer: sunpoet@FreeBSD.org
- Port Added: 2022-12-30 09:11:37
- Last Update: 2024-09-08 18:37:46
- Commit Hash: b0cfb0d
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: python
- License: BSD3CLAUSE
- WWW:
- https://github.com/rougier/freetype-py
- Description:
- Freetype Python provides bindings for the FreeType library. Only the high-level
API is bound.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}freetype-py>0:print/py-freetype-py@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/print/py-freetype-py/ && make install clean
- To add the package, run one of these commands:
- pkg install print/py-freetype-py
- pkg install py311-freetype-py
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py311-freetype-py listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py311-freetype-py
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1725559881
SHA256 (freetype-py-2.5.1.zip) = cfe2686a174d0dd3d71a9d8ee9bf6a2c23f5872385cf8ce9f24af83d076e2fbd
SIZE (freetype-py-2.5.1.zip) = 851738
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py311-setuptools>=42 : devel/py-setuptools@py311
- py311-setuptools-scm>=3.4 : devel/py-setuptools-scm@py311
- py311-wheel>=0 : devel/py-wheel@py311
- python3.11 : lang/python311
- py311-build>=0 : devel/py-build@py311
- py311-installer>=0 : devel/py-installer@py311
- Test dependencies:
-
- python3.11 : lang/python311
- Runtime dependencies:
-
- python3.11 : lang/python311
- Library dependencies:
-
- libfreetype.so : print/freetype2
- This port is required by:
- for Run
-
- graphics/py-vispy
- print/py-fontbakery
Configuration Options:- No options to configure
- Options name:
- print_py-freetype-py
- USES:
- python zip
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
2.5.1
08 Sep 2024 18:37:46
 |
Po-Chuan Hsieh (sunpoet) |
print/py-freetype-py: Update to 2.5.1
Changes: https://github.com/rougier/freetype-py/releases |
2.4.0
08 Apr 2024 06:46:50
|
Po-Chuan Hsieh (sunpoet) |
print/py-freetype-py: Remove PY_SETUPTOOLS
py-setuptools should be used rather than PY_SETUPTOOLS |
2.4.0
29 Feb 2024 07:18:32
|
Charlie Li (vishwin) |
devel/py-setuptools-scm: update to 8.0.4
Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.
Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.
Further details: https://wiki.freebsd.org/Python/setuptools
Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288 |
2.4.0
18 Jul 2023 00:53:09
|
Charlie Li (vishwin) |
devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}
Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.
With hat: python
PR: 270510, 270358 |
2.4.0
27 Jun 2023 19:34:34
|
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
2.4.0
07 May 2023 21:13:48
|
Po-Chuan Hsieh (sunpoet) |
print/py-freetype-py: Update to 2.4.0
- Convert to USE_PYTHON=pep517
Changes: https://github.com/rougier/freetype-py/releases |
2.3.0
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
2.3.0
30 Dec 2022 09:04:00
|
Po-Chuan Hsieh (sunpoet) |
print/py-freetype-py: Add py-freetype-py 2.3.0
Freetype Python provides bindings for the FreeType library. Only the high-level
API is bound. |
As an Amazon Associate I earn from qualifying purchases.