Chase major version update of editors/emacs-devel

Bump PORTREVISION of most USES=emacs ports after editors/emacs-devel
major version increased from 30 to 31.

Sponsored by:	The FreeBSD Foundation

Chase editors/emacs update to 29.4

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths
- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish, yasu
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D45705

Chase editors/emacs update

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths
- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D44492

*/*: Chase editors/emacs update

- Bump Emacs version in Mk/Uses/emacs.mk to update version-specific
  paths

- Bump PORTREVISION of ports with USES=emacs.  This is required for two
  reasons.  Emacs lisp files need to be byte compiled for the new Emacs
  version, and files installed under, e.g., EMACS_VERSION_SITE_LISPDIR
  need to be relocated.

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D43615

editors/emacs: Update to 29.1

* Update Canna patch to the one for Emacs 29.
* Add new options PGTK, SQLITE3, TREESITTER and WEBP. SQLITE3 and
  TREESITTER are ON by default. PGTK and WEBP options are excluded
  from nox flavor.
* CARGO option doesn't imply XFT but prevents it. It is caused as a
  result of adding pure GTK support (PGTK option).
* OTK options doesn't imply XTF any more. It is also caused as a
  result of adding pure GTK support.
* Update NATIVECOMP option so it specifies ahead-of-time compilation
  via the configure argument.
* Remove "experimental" from NATIVECOMP_DESC.
* Add print/freetype2 and x11-fonts/fontconfig to CAIRO_LIB_DEPENDS
  and GTK3_LIB_DEPENDS. Necessary to link emacs binary with shared

editors/emacs-devel: Update to 2022-11-28 snapshot

Bump PORTREVISION of consumers as EMACS_VER is changed to 30.0.50.

Changes:	https://github.com/emacs-mirror/emacs/compare/51589f81...7939184f

editors/emacs: Update to 28.2

* Remove FCITXPATCH option as extra-patch-src_xfns.c can't be applied
  since 28.1.
* Tidy up Makefile with portfmt.
* Bump PORTREVISION of consumers.

ChangeLog:	https://www.gnu.org/software/emacs/news/NEWS.28.2

PR:		266454
Exp-run by:	antoine
Reviewed by:	ashish, jrm
Differential Revision:	https://reviews.freebsd.org/D36613

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>

Emacs ports: Bump PORTREVISION after Emacs 28.1

Reviewed by:	ashish
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D34781

USES=emacs: Chase package name changes

PR:		259259
Differential Revision:	https://reviews.freebsd.org/D32613

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

editors/emacs: Update to 27.2

This is a bug-fix release with no new features.

https://www.gnu.org/software/emacs/news/NEWS.27.2

Reviewed by:	ashish
Differential Revision:	https://reviews.freebsd.org/D27700

editors/emacs: Update to version 27.1

Please refer to the 20200811 UPDATING entry when upgrading
dependent (*-emacs26-*) ports.

Port changes:

- depend on math/gmp
- match upstream by turning CAIRO, HARFBUZZ, and JSON options and on and
  turning MAGICK off by default
- remove OPENMP check for graphics/ImageMagick as the openmp is now
  included in base
- update EMACS_VER in Mk/Uses/emacs.mk
- bump USES=emacs ports or remove BROKEN for net-im/jabber.el and
  deskutils/howm, which now build

Submitted by:	HIROSE Yuuji <yuuji@gentei.org> (canna patch)
Reviewed by:	ashish
Differential Revision:	https://reviews.freebsd.org/D23966

Update to 1.82.

- Update to 1.81.
- Add LICENSE.
- Update yatex-startup.el for modern Emacsen.

Mark a few ports BROKEN (unfetchable)

Convert to UCL & cleanup pkg-message (categories [p-r])

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

USES=emacs ports: Bump PORTREVISION for editors/emacs 26.1 upgrade

Or, mark ports that fail to build as BROKEN.
https://lists.freebsd.org/pipermail/freebsd-ports/2018-May/113518.html

For ports under `print' category: remove redundant PKGMESSAGE assignment,
which is set appropriately by the b.p.m when `pkg-message' appears on the
SUB_FILES list.

Flavorize and modernize Emacs ports

- Convert USE_EMACS to USES=emacs
- Remove editors/emacs-nox11 (refer to nox flavors of editors/emacs and
  editors/emacs-devel)
- Permit default Emacs flavor to be specified in make.conf
- Rename japanese/migemo-emacs23 to japanese/migemo-emacs
- Update and simplify audio/emms and fix build on FreeBSD 10 [1]
- Update databases/bbdd and fix build on FreeBSD 10 [1]
- Update editors/emacs-devel
- Ensure Makefile shell commands that change directory are executed in a
  subshell
- Silence some portlint warnings

[1] By not depending on base texinfo

PR:		225404
Reviewed by:	antoine
Approved by:	portmgr (mat) ashish (maintainer)
Differential Revision:	https://reviews.freebsd.org/D13506

Cleanup plist

Correct all instances where OPTIONS_DEFINE was being overwritten
by multiple definitions.

Support stage

Convert to USES=dos2unix

With hat:	portmgr

Fix properties on pkg-plist

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

- Remove obsolete print/yatex-xemacs.
- Simplify print/yatex.

Update to 1.77.  Changes include:

- last-command-char issue has been fixed.
- %#DVIPDF now supports selection of dvi-to-pdf programs.
- More PDF viewers added to the menu.

Update to 1.76.

- Bump PORTREVISION to chase Emacs port updates
- Unbreak INDEX caused by databases/lsdb, editors/flim, and editors/semi

- update png to 1.5.10

- Kick MD5 Support

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Changes to editors/emacs and Mk/bsd.emacs.mk were taken from
PR/137956 by Ashish SHUKLA (thanks!).  [1]

Those ports which define EMACS_PORT_NAME to be "emacs21" were
not touched (this time). They may be converted to the new
world order by removing the above mentioned assignment.

Four ports were marked as BROKEN with EMACS_PORT_NAME=emacs23
(they do not compile):
. lang/bigloo;
. mail/wanderlust;
. mail/wanderlust-devel;
. www/emacs-w3m.

Three ports were marked as IGNORE with EMACS_PORT_NAME=emacs23:

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Fix pkg-plist.
- Some style clean-ups.

Spotted by:     pointyhat

Fix NOPORTDOCS=yes case and style cleanups.

Update to 1.73.

Submitted by:   Shota IWAZAKI
PR:             ports/112391

Fix pkg-plist and bump PORTREVISION.

Spotted by:     pointyhat
Approved by:    portmgr (erwin)

Fix pkg-plist.

Spotted by:     pointyhat

 - Fix possibility of "infinite make fork" when "Registering install for ..."
   EMACS ports.  [1]

 - Allow building a port as root using an NFS-mounted /usr/ports if the
   server maps root to a UID other than root. [2]

 - Make 'BROKEN' and 'IGNORED' ports exit their "make install" with a fail
   status rather than success. [3]

 - Improve behavior when dealing with versioned dependencies. [4]

 - Fix false positives in check-conflicts target. [5]

 - Remove obsolete bzip2 code. [6]

SHA256ify

Approved by: krion@

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

Fix pkg-plist for XEmacs.

Reported by:    kris

Chase master-site

PR:             ports/67390
Submitted by:   Roman Neuhauser
Approved by:    maintainer timeout

Update to 1.72.  yatexpkg.el has been added to support inserting
\usepackage{} automatically, and several bugs have been fixed.  Take
the maintainership.

PR:             ports/61926
Approved by:    maintainer timeout (3 months)
Approved by:    linimon (mentor)

SIZEify (maintainer timeout)

Destroy pkg-comment for some of the stranger uses in the tree,
pending the final semi-automatic purge.

Approved by:    portmgr (implicitly)

Update the version to 1.70
Add EMACS_NO_BUILD_DEPENDS=yes in emacs20/emacs21
Delete BUILD_DEPENDS in xemacs21-mule (use BUILD_DEPENDS added in bsd.emacs.mk
instead of it)

Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command;   the ECHO
macro is set to "echo" by default, but it is set to "true" if   make(1) is
invoked with the -s option while ECHO_CMD is always set to   the echo command.  
 

Update to 1.69.k    

Update version to 1.69.e (this is beta version, 10103091216).     The version
supports YaTeX's hilighting for XEmacs (font-lock).    

Typo    

Convert category print to new layout.  

Rename PLIST.<emacs> to pkg-plist.<emacs>.    

(1) Fixed a problem hunging up the package-making system on bento    

Change dependency from texinfo.el to texinfmt.el.   Texinfo.el is a major mode
elisp for editing Texinfo files.   Texinfmt.el is for formatting Texinfo files
into Info files.    

Change dependency port from editors/xemacs-sumo-packages to  
editors/xemacs--packages (editors/xemacs-sumo-packages was deleted from   the
port tree).    

No need to delete share/emacs/site-lisp, it's created by mtree.    

Remove empty directories upon deinstallation.